Enostranski stroj za robove

IMA NOVIMAT CONTOUR I/G80/790/R3

Stanje: rabljeno, številka stroja/vozila: 008662, Pozicija 1: Enostranska kantna strojna linija IMA-NOVIMAT CONTOUR I/G80/790/R3 Pozicija 2: Sistem za vračanje plošč IMA-NOVIMAT CONTOUR I/G80/790/R3 Todpfx Aqezmmtnstjb

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za vstavljanje moznika z upravljalno pištolo za sočasno nanašanje lepila in vstavljanje moznika Standardni mozniki premera 8 mm Todpfxjqu N U Dj Aqtjb Dolžina moznika: 25–80 mm Nazivna zmogljivost: 1 moznik na sekundo (vključno z nanašanjem lepila) Uporablja lepila PVA (vodna disperzija), viskoznost 200–400 mPa 1 kos REZERVOAR ZA LEPILO, kapaciteta 8 kg 1 kos REZERVOAR ZA VODO, kapaciteta 8 kg Maksimalni tlak: 5 bar

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control unit: ICOS Open Feed speed m/min (adjustable): 16 - 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Tsdpfx Ajd Scydjqtsb Adjustable stop ruler, CNC controlled Jointing unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) VTG + 283.203 Edge magazine for rolls (number of compartments): 6 End trimming unit 08.42/30/B (Kw 0.2 x 2) max 30 m/min (0°-25°) Milling unit 08.0587 (Kw 1.0 x 2), 4 profiles Multifunctional unit (radius and contour milling) KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 08.190 (Kw 4.5 x 1) 90°/180°/270° CNC

Stanje: kot nova (razstavni stroj), SINGLE-SIDED EDGE BANDER (LEFT) Edge thickness on rolls (min/max) mm 0.3 / 3 – in lippings/strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Pressure belt driven by V-belt Spray unit (for liquid non-stick) Adjustable fence, CNC controlled Panel feeding system 700.101 (mm 500 x 500) Jointing milling unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo-motor), adjustable via CNC Gluing unit (premelter with laser) Laser system IMALUX Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments No.) 6 Todpfjgbug Nex Aqtsb Linear end trimming unit 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Stanje: rabljeno, Leto izdelave: 1989, Grinding and Polishing Maximum glass sheet dimensions: 3000 x 3000 mm Minimum glass sheet dimensions: 40 x 80 mm Tedpjnzkwmofx Aqtsb Working height: 820 mm Dimensions: Length: 7,300 mm Width: 830 mm Height: 2,730 mm Weight: 3,650 kg

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Gantry design, equipped with ICOS-Open control system. Software: IMAWOP + IMAwinCAD. Set-up table with consoles. Number of consoles: 6 (1450 mm) DYNAPOINT Automatic positioning of consoles (X-axis) Automatic positioning of vacuum clamps (Y-axis) Automatic tool changer – 18 tool positions Max. working area (X-Y-Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and control panel. Total connected load: 34 kW WORKING UNITS (TOP): No. 1 vertical main spindle (milling unit), HSK F63, drive power: 18 kW (S6) Fixed 90° saw, diameter 200 mm Edge banding unit (installed on the machine) VT 100 2-fold coil magazine Todpfjtixpusx Aqtob Combi-unit (flush-trimming/profile scraper) Feed system with brush table No. 6 clamps for securing and moving the panel on the machine vacuum cups Workpiece outfeed with motorized rollers and angle transfer system

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 / Working width (min/max) mm: 225 - 3000 Control/Software: Power Control PC 22 - Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam distance (mm): 400 EDGING PROCESSING (per side): Protection milling cutter (pre-milling) 1 x kW 4.5 Roughing unit KD 11 (2 x kW 6.6) EDGE BANDING SECTION (per side): Gluing unit (Hot melt glue + pre-melter) A3 + SERVO Edge pressure zone “A” Edge magazine for rolls (compartment No. 2) End trimming unit HL 84 (2 x kW 0.22) Pre-milling unit (2 x kW 0.55) Milling unit 2 x kW 0.4 Profile copying milling unit FF 12 (4 motors x kW 0.4) LEFT SIDE: 2 x Universal milling units (electro-pneumatically controlled) UF 11 (kW 4 x 2) 0°-90° RIGHT SIDE: 1 x Universal milling unit (electro-pneumatically controlled) UF 11 (kW 4 x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + smoothing unit) FA 11 Todpfx Aqop N D Ngetjb

Stanje: rabljeno, Leto izdelave: 1994, Dolžina vozička 2800 mm, fiksni dolžinski prislon 90°, duplex, širina reza 1300 mm z ročnim nastavljanjem, 7,5 kW, brez predrezkarja. Skladišče: Nattheim Todpfx Aqozh Hwcsteb

Stanje: dober (rabljeno), Leto izdelave: 2014, Conveyor belt, belt conveyor, transport belt, belt conveyor system - Manufacturer: Transnorm, belt conveyor with central drive - Type: 1100 - Speed: frequency-controlled, up to 58.7 m/min - Drive: SEW-Eurodrive 1.1/0.11 kW, see nameplate photo - Belt width: 600 mm - Conveyor length: approx. 15,000 mm / approx. 1,000 mm (height-adjustable) Tjdpfx Aqoign U Sjtsb - Installation dimensions: 15,120 / 970 / H340 mm - Transport dimensions: 4,440 / 970 / H1430 mm - Total weight: 492 kg

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge Material (Rolls) Thickness (min/max) mm: 0.3 - 3 Edge Thickness in Strips (min/max) mm: 1 Panel Thickness (min/max) mm: 8 - 60 Control Unit: ICOS Open Compact Feed Speed m/min (adjustable): 6 - 30 Top Pressure: Belt-driven Spraying Unit (for liquid non-stick agent) Adjustable Fence, CNC controlled Pre-milling Unit with CNC control 08.378 (2 x 4.5 kW) Lamps for panel side heating Gluing Unit (Hot Melt Glue + pre-melter) 04.1570 Spraying Unit (for separating fluid) Edge Pressure Zone Edge Magazine for Rolls (compartment no.): 16 Cross-cutting Unit 08.42/30/B (2 x 0.66 kW - Pneumatic 0° - 25°) 30 m/min Multi-profile Milling Unit (CNC controlled) 08.0587 (2 x 1 kW) Spraying Unit (for sliding fluid) Contour Trimming Unit (for fine trimming) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Shaping Copy Milling Unit 08.604 (4 x 0.25 kW) Spazzola Multi-profile Scraper Unit (CNC controlled) 08.516 Flat Scraper Unit 08.521 Tjdpfx Aom Udfwsqteb Spraying Unit (for polishing fluid) Buffing Unit 08.617-4 (4 x 0.18 kW) Surface Smoothing Unit 08.53