ENO stran ROBNA LEPILKA (levo)

IMA Novimat/Contour/I/G80/790/R3

Stanje: rabljeno, številka stroja/vozila: 008660, Vrsta obdelanega roba: tanek rob, debeel rob Lepilni sistem: EVA Obdelava s frezo: da Multifunkcijska enota: da Enota za obdelavo z zgornjo frezo: da Maks. hitrost premika: 30 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 9 kos Gsdpfx Adszmmt Ujkouf

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Gedpfsfi Tg Hjx Adkouf Total connected load kW 30

Stanje: rabljeno, številka stroja/vozila: 008662, Pozicija 1: Enostranska kantna strojna linija IMA-NOVIMAT CONTOUR I/G80/790/R3 Pozicija 2: Sistem za vračanje plošč IMA-NOVIMAT CONTOUR I/G80/790/R3 Gujdszmmtnepfx Adkef

Stanje: kot nova (razstavni stroj), SINGLE-SIDED EDGE BANDER (LEFT) Edge thickness on rolls (min/max) mm 0.3 / 3 – in lippings/strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Pressure belt driven by V-belt Spray unit (for liquid non-stick) Adjustable fence, CNC controlled Panel feeding system 700.101 (mm 500 x 500) Jointing milling unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo-motor), adjustable via CNC Gluing unit (premelter with laser) Laser system IMALUX Spray unit (for separating agent) Gusdpogbug Nofx Adkof Pressure zone + edge magazine for rolls (compartments No.) 6 Linear end trimming unit 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Stanje: novo, lastna masa: 900 kg, največja dovoljena obremenitev: 1.600 kg, skupna masa: 2.500 kg, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 2.300 mm, velikost pnevmatike: 195/55r10c, Robust and high-quality sales trailer as a flatbed high-loader for snacks or merchandise. Our *SELLERH* series snack trailers feature an insulated sandwich construction. The sturdy steel frame is welded and hot-dip galvanized in a bath, ensuring high stability. The door is equipped with a lockable steel latch, *not plastic*. The *box body* consists of 25 mm polyester sandwich panels in white. The *car trailer* has four crank supports for leveling the *snack trailer*. A cost-effective *car trailer* suitable for markets, snack sales, cocktails, fast food, non-food, street food, merchandise sales, and more. Standard equipment overview: Gedpfepfb Nyex Adkeuf *Lockable entry door with steel latch*, *step on drawbar*, *sales hatch on the right* with interior locking gas struts, electrical distribution panel, sturdy *crank supports*, *25 mm sandwich body* in white exterior, maneuvering handles, jockey wheel with bracket, robust *welded frame*, and a highly stable V-drawbar, hot-dip galvanized. Optional accessories for our *sales trailers* include additional *hatches*, *tarpaulins*, *shelf pockets*, sales counters, cabinets, sinks, *PVC flooring*, *100 km/h shock absorbers*, and *trailer locks*.

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), Aluminium angle conveyor belt including mobile undercarriage Horizontal section: 1,100 mm Inclined section: 1,500 mm Angle of incline at bend: 60° Total belt length: 1,750 mm Discharge height: approx. 1,600 mm Height of horizontal section: 300 mm (infeed height) Conveyor belt width: 500 mm PU conveyor belt incl. carriers and wave edge, petrol matt finish Drive: Motor 0.25 kW, speed 0.2 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive and components ready to connect, motor control optional Guedpfxoi Igiko Adkjf 4x fully swivelling transport castors with parking brake 2 pcs. wave edge 50x35 mm 11 pcs. T-50 cleats centrally welded – 481 mm pitch 2-ply, especially cross-stable Usable width 290 mm, calculated as follows: Crosswise arrangement -70+30-5+290-5+30-70 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Gedsychqzopfx Adkouf Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Leto izdelave: 1994, stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Gusdpfx Asgyd T Eodksf Machine No.: 04.2398 Year of manufacture: fully refurbished by the manufacturer in 1994 Weight: 3,700 kg Tensile force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz

Stanje: rabljeno, Leto izdelave: 2016, Mitre plate saw with automatic pre-tensioning and double pusher system for optimized cutting OSI Plus numerical control OS Labeling – onboard labeling unit with graphical marking of parts including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Powered feed rollers for side loading via lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Gjdpfsuc Idxsx Adkeuf Automatic recognition of disposable (sacrificial) boards based on specified thickness data in the machine parameters Low stack stop Automatic side loading. Includes: containment fences, twin photocells, pushbutton panel, electrical preparation for the two powered infeed roller conveyors, plus reinforcement with 4 rollers instead of fork passages on the infeed conveyor Intermediate roller conveyor Side loading roller conveyor measuring 3800 x 2200 mm with powered rollers (floor-to-conveyor height 325 mm) Gravity conveyor for longitudinal offcuts to corner station 4500 mm (total length: 7295 mm) 3000 mm conveyor extension for crosscut offcuts Long chute for manual crosscut transportation to the central gravity conveyor Air-cushion outfeed table 2050 x 850 mm, front side equipped with wheels Air generator for up to 6 air-cushion table decks MULTIPUSHER 2.4 System with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows reduction of the minimum panel length to be crosscut from 1830 mm to 1220 mm Automatic device for detecting blade shaft flexure in angular cuts (longitudinal and cross axes), consisting of a sensor for direct deflection measurement on the blade shaft and a device for recording saw blade revolutions directly at the chuck Remote-cycle start keypad Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main sawblade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Saw carriage speed: 1–140 m/min (servo motors) Longitudinal pusher carriage speed: 90 m/min Cross pusher carriage speed: 135 m/min Double shuttle carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed + 2 on the Multi-Pusher cross carriage) Cutting system for thin panels

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Technische Daten: - Arbeitsbreite: 1350 mm Godpfx Adjvdtxiskouf - Pneumatische Oszillation - Vakuumtisch - Stand-alone Maschine (Tischhub/-senkung) 1. Kombi-Aggregat: - Motorleistung: 18,5 kW - Stahlkalibrierwalze - Stufenlose Bandgeschwindigkeitsregelung - Segmentiertes Schleifpad (52 Segmente à 26 mm) 2. Kombi-Aggregat: - Segmentiertes Schleifpad (52 Segmente à 26 mm) - Motorleistung: 7,5 kW - Stufenlose Bandgeschwindigkeitsregelung - Bürste am Materialauslauf - Stufenlose Vorschubregulierung - Pneumatische Bandreinigung