Oblikovanje in rezkanje

WEINIG PFA 14/7

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fsdpfxjrigxye Aprjpk Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Leto izdelave: 2026, stanje: novo, VKM – Destacking System for Milled Timber Fpjdpfjg Rxhgsx Aprek With our solution for separating milled timber, whether loosely stacked or in bundles, pre-milled timber pieces can be efficiently processed further. Using a two-stage system, the timber pieces are separated and made available for downstream processing. It is also possible to feed the separated timber pieces into a continuous process in a controlled manner. The infeed mechanism is mechanically engineered to reliably feed even warped timber. Additionally, it can be adjusted for timber diameter to ensure that only one piece is conveyed at a time, preventing bottlenecks and stoppages further down the processing line.

Stanje: delavnici obnovljeno (rabljeno), Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig four-sided planer Profimat 23 window version with glazing bead separation or can be used as a grooving spindle. ATS control and program control ----- In 2024, the machine was factory-refurbished by Weinig. Technical data summary (possibly including additional accessories – please inquire) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically activated up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatic up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter Fsdpfxjxpn T Ue Aprepk > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional features ----- > Glazing bead separation or usable as grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with memory for 99 programs > Machine operation: window package Combined control of the right spindle and glazing bead separator via manual selector switch on the control panel > Spindles with mechanical digital display (technical data as per manufacturer – subject to confirmation!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, WEINIG Hydromat H25R, ser. št. 2603-624, letnik 1981 z pohodno zvočno zaščitno kabino KASCHWIG – SKORAJ NOVA iz leta 2017 • Kratka dovajalna miza s težkim 6-valjnim podajalnikom 1. Vreteno spodaj 11,0 kW 2. Vreteno desno 11,0 kW 3. Vreteno levo 11,0 kW 4. Vreteno zgoraj 15,0 kW Fedpfx Apotkt Tpsrspk 5. Vreteno spodaj 11,0 kW 6. Vreteno spodaj 11,0 kW • Hidravlični podajalnik 6-60 m/min. • Podajalni motor 22,0 kW • 4 x pogonski mizni valji • Premer vretena 50 mm • Avtomatsko mazanje mize • Vreteno 1 + 4 + 5 + 6 z nasprotnim ležajem • Vreteno 1 + 4 z direktnim ravnalom • Podajalni valji 170 mm • 4 kosi hidro skobeljnih glav 150 mm • 6 kosov hidro skobeljnih glav 250 mm • Odsesovalni nastavek nad strojem

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Max. working width: 1000 mm, feed rate: 5–20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, complete with documentation, regularly maintained. Fsdsi E Trpopfx Aprjpk

Stanje: dober (rabljeno), Tilting spindle moulder, table milling machine Fsdpfxeh Nvyzo Aprspk -Spindle adjustment: height and angle -Tiltable: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed unit: Holz-Her, 3 rollers -Usable spindle length: 100 mm -Spindle diameter: 30 mm -Max. cutter diameter: 220 mm -Dimensions (LxWxH): 1540/1100/1520 mm -Weight: 962 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Ponujamo rabljeno hidro-toplotno napravo za obdelavo lesa IWT Moldrup-SPP Industrijska naprava MOLDRUP-SPP je zasnovana za hidro-toplotno modifikacijo lesa premerov do 2.600 mm in dolžin do 12.000 mm. Izdelana je iz robustnega nerjavečega jekla ter konstruirana za neprekinjeno industrijsko proizvodnjo z v celoti avtomatiziranim PLC-krmiljenjem. Industrijska hidro-termična naprava za obdelavo lesa – Ø2.600 x 12.000 mm Industrijska naprava za hidro-toplotno obdelavo je namenjena učinkoviti in enakomerni termični modifikaciji lesa v nadzorovanem, kisika prostem okolju. Jedro naprave predstavlja robusten nerjaveč jekleni avtoklav Ø2.600 mm × 12.000 mm, ki omogoča obdelavo približno 15–22 m³ lesa na eno polnjenje, pri obratovalnem tlaku do 12 bar (absolutno). Popolnoma avtomatiziran sistem s PLC-krmiljenjem omogoča natančen nadzor vakuuma, tlaka, temperature in večfaznih procesnih ciklov. Integriran vakuumski sistem zagotavlja varno odstranjevanje kisika, medtem ko sistem ogrevanja s termalnim oljem skrbi za natančno upravljanje temperature tekom celotnega postopka. Fpjdpfx Apjymxqaerok Celotna postavitev obsega tlačno posodo, ogrevalni sistem, vakuumsko črpalko, cirkulacijski ventilator, sistem za ravnanje s kondenzatom, nakladalni voziček ter varnostno opremo. Priloženi so tudi agregat za ogrevanje s termalnim oljem (boiler skid) in naprava za nadzor emisij. Tehnična dokumentacija je na voljo na zahtevo. Hidro-toplotna naprava za obdelavo lesa se prodaja v videnem/obstoječem stanju. Za vsa dodatna vprašanja ali več informacij nam lahko pišete ali nas pokličete.

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table Fpjdpohlp D Nsfx Aprsk - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: skoraj kot novo (rabljeno), Manufacturer: V. Randwijks Rotor diameter: 500 mm Fedpfxog Snt Se Apropk Rotor width: 700 mm Drive: 22 kW / 1,470 rpm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air Fjdpfx Aeychqzjpropk 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)