Stroj za robne trakove

IMA Klessmann Novimat Concept /I/G/80/650/R3

Stanje: rabljeno, številka stroja/vozila: 008018, Tip pritrjene obrobe: tanka obroba, močna obroba, masiven les Lepilni sistem: EVA, PUR Spojno rezkanje: da Gedpfx Abswv Dfcs Tokf Multifunkcijska enota: da Maks. podajalna hitrost: 20 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 7 kos

Stanje: novo, Leto izdelave: 2025, Različni lepilni rezervoarji za lepilne trakove in obrezovanje na strojih za lepljenje robov. Dobavljamo nove lepilne rezervoarje ali obnovimo vaše rabljene. Prodajamo tudi posamezne nadomestne dele. Scm, Stefani, Idm, Ima, Biesse. Gkedpfxof Tc Rqs Ab Tof

Stanje: zelo dobro (rabljeno), Single-sided edge banding machine (LEFT) Edge thickness (tape, min/max) mm: 0.3 - 3 Edge thickness (solid strips min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: Driven by V-belt Sprayer unit (for liquid non-stick agent) Jointing milling unit 08.376 (2 x 3 kW) Gluing unit (hot melt adhesive) 283.1513 Pressure zone for edging Edge magazine for tape (compartment no.): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and profile milling) 08.342 (2 x 0.66 kW) servo-controlled Gkodpfx Abod Nuu Hj Tsf Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers Gjdpfx Aovvkfdsb Tskf - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Stanje: rabljeno, Working width: 1350 mm Number of sanding units: 2 pcs. Maximum workpiece thickness: 160 mm Sanding belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT: ROLLER 2ND BELT: COMBINATION UNIT (ROLLER/PAD) SUITABLE FOR SOLID WOOD, VENEER, AND INTERMEDIATE COATING SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 x 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Continuously adjustable feed conveyor with variable speed: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION: ECO GEAR PATENT SYSTEM - 1 PC. DRUM BRAKE for belt stop - Swiveling ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP STRIP at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER CONVEYORS, each with 2 rollers at infeed and outfeed - AUTOMATIC CENTRING OF FEED CONVEYOR - 1 EXTRACTION CONNECTION, 160 mm diameter - AUTOMATIC TABLE POSITIONING IMPORTANT: New patented belt oscillation system 1. No valves 2. No photo sensors 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt tracking issues! - Unitek steel calibrating roller (same for all models) - Unitek flexible pressure shoe before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set, 6 positions (per pc., same for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width: 1350 mm) - Unitek belt motor upgrade to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor: 14.7 kW (for Excel 2-belt only) - Unitek automatic table lowering in case of emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed or outfeed conveyor with 4 rollers (same for all models) - Price per roller conveyor - Unitek electronic control of machine functions with 12'' touchscreen (same for all models) Automatic workpiece sensing with feed motor control ----- Machine price for the above configuration on request! ----- Optional items at extra cost: Gksdpfxermucxe Ab Tjf Surcharge for 3-belt machine (roller-roller-pad, Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and user training: EUR 1,300.00 ----- All prices are net plus 19% statutory VAT. ----- (Technical data according to manufacturer's information – no liability assumed!)

Stanje: rabljeno, Leto izdelave: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power requirement: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction capacity: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double upper pressure for workpiece stability Electronic thickness control Feed frequency inverter Automatic lubrication of the feed chain Automatic motor calibration Touchscreen control system Emulsion spraying at infeed and outfeed Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with interchangeable knives Motorised cutting depth adjustment Gluing unit Application of glue as well as hot air Heated application roller Quick-change complete unit Automatic positioning via motor 3 pressure rollers Edgebanding speed: 14 m/min End trimming unit Dual-motor unit with automatic tilting Tilting up to 15° THK prism guides Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Gkedpov Szt Dsfx Ab Tof Automatic tool position change with servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung Gjdet R T Hcjpfx Ab Tokf 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: rabljeno, Leto izdelave: 2019, Edge control: numerical control Panel height min - max: 6 - 60 mm PVC/ABS up to 3 mm Minimum panel length / width: 140 / 60 mm Feed speed: up to 10 / 25 m/min, continuously variable Working height: electronically adjustable via NC Side roller track with return rollers for panel support Rectifier unit with 2 motors Coil holder plate Gluing unit for EVA / PUR glue with cartridge or granulate system Edge pressure unit for straight profiles with electronically adjustable pressure rollers (NC) Gkjdjwwhn Dopfx Ab Tef End trimming unit with 2 motors Buffing unit with 2 tilting motors, electronically adjustable via NC Corner rounding unit with 4 multifunction motors (chamfering + rounding), regulated via numerical control in automatic mode Scraper with electronic regulation via NC Glue scraper unit Buffing unit Machine length: approx. 6500 mm Weight: approx. 2750 kg

Stanje: rabljeno, Leto izdelave: 2022, Used machine Year of manufacture: 2022 Gksdpewxz Uyofx Ab Tef Condition: as new Includes 6 months full warranty! Only 70 operating hours; the machine has never been in production use! Equipment and technical specifications: BASE MACHINE Holz-Her machining center DYNESTIC 7535 10.5 Lift Processing length: 3100 mm Machine frame in welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles gantry-type design Helical rack-and-pinion drive in X and Y direction, 1 x ball screw in Z direction for precise positioning MATRIX table Solid, continuous machining table with grid division, continuous grooves in X and Y direction, groove pitch 50 mm with 25 meters of sealing cord for clamping the sacrificial plate 1 machining field with stop rails / stops Height 30 mm, pneumatically retractable. 2 stop rails each in Y direction and 1 stop in X direction right (from the front edge of the machine) Remote maintenance Integrated network card for data transfer of control and program data. Data transfer takes place via high-speed internet connection Requirement: High-speed internet connection at the machine USB port For data backup or for directly loading machining programs at the control panel TECHNICAL DATA Processing dimensions 7535 10.5: Max. support area on nesting table: X = 3100 mm Y = 1560 mm Max. travel paths: X = 4695 mm Y = 2305 mm Z = 565 mm Max. machining height 7535/7735 Classic without pusher: Z = 300 mm from table surface (without sacrificial plate) Max. clearance height of the pusher over the table for Push/Auto/Lift versions: Z = 250 mm from table surface (without sacrificial plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min MACHINE OPERATION SOFTWARE CAMPUS V7 PLUS CAD/CAM software, 1 x license incl. material removal simulation BetterSim 1 software license secured by license dongle for the machine CAMPUS V7 PLUS, software for CNC machining centers: Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM functions for creating part variants using macro technology Hi-Speed USB Device Network Server Allows the use of the CAMPUS single license on the machine or a PC in the same network One license can be used in the network at a time! Additionally: CAMPUS V7 PLUS CAD/CAM software, 1 x license incl. material removal simulation BetterSim 1 software license secured by dongle for office or machine CAMPUS V7 PLUS, software for CNC machining centers: Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with WO

Stanje: rabljeno, Leto izdelave: 2014, Power Control PC 22 control unit with WoodWop – POWERTOUCH software. Panel thickness: 8 - 60 mm. PVC/ABS edge thickness: 3 mm. Feed speed up to 25 m/min (20 m/min with corner rounding). Electronically adjustable working height via CNC. Motorized, rubberized belt with superior pressure. Panel support guide and assisted loading for small panels. Controlled infeed guide. Anti-adhesive unit. Pre-milling unit with two 3 kW motors, 9000 rpm, with ball bearings. Glue application unit for PUR adhesive with pre-melter and glue tank. Edge pressure unit for straight profiles with electronically adjustable pressure rollers (CNC-controlled). Trimming unit with two motors (automatic tilt adjustment?). End trimming unit with two motors. Corner rounding unit with two multifunction motors (trimming + rounding) with CNC control. Edge scraping unit. Glue scraping unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS MUST BE VERIFIED. Gedpfx Ajvqbh Ejb Tjkf