Vrnitevni sistem Barbaric

Barbaric Return RTS Compact

Stanje: rabljeno, Število vreten: 5 kosov Delovna širina: 230 mm Višina skobljanja: 120 mm Avtomatski štiristranski skobeljni in profilirni stroj Weinig Profimat 23 E za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom. Vreteno 1: Spodaj / 5,5 kW / 40 mm Hodpox Ecgujfx Abxenn Vreteno 2: Desno / 5,5 kW / 40 mm Vreteno 3: Levo / skupen motor z #2 / 40 mm Vreteno 4: Zgoraj / 7,5 kW / 40 mm Vreteno 5: Spodaj / 4 kW / 40 mm

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) Hnodju R Szaepfx Abxjn - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Includes: - Column-mounted slewing crane BARBARIC Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -

Stanje: rabljeno, Leto izdelave: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Milling Unit including DIA Tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combi-milling station for radius R 2.5 mm. Technical Description: - Hotmelt adhesive application to workpiece for edge materials up to 3 mm - Maximum workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combi version) and fine adjustment accessible from operator side - Spare slots for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for trimming saw - Signal lamp for workpiece sequence Hnsdpfx Aex S Hmzobxon - Robust chain drive - Ergonomically arranged operator panel - Double roller upper pressure beam - Aggregate viewing window from both rear and operator side of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Special Equipment: Airtronic incl. cooling and antistatic spray unit (2014) 1 pc. hot air unit for achieving optical zero joint with special edging materials - Including pneumatic glue pot positioning - Including cooling and antistatic spray unit - Including 2 additional quick-change edge channels - Including special corner rounding milling unit (max. workpiece thickness: 60 mm, min. length: 200 mm) - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible (extra cost on request) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min Upgrade for 8 mm edge thickness 1 pc. for max. 40 mm workpiece thickness Including pneumatic saw adjustment (special design) Minimum workpiece thickness: 8 mm 3-point pneumatic milling cutter adjustment Switching radius – chamfer – flush for combi milling stations, eliminating manual adjustment at the combi milling station for the 3rd reference point. PLC control mandatory. Buffing station (polishing) 1 pc. corner rounding milling unit incl. combi tool and pneumatic adjustment for chamfer/radius (max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm) Radius scraper 1 pc. incl. pneumatic lifting device (radius R 2.0 mm) Flat scraper 1 pc. with pneumatic activation Full chassis 1 pc. Glue station change system incl. glue drain device prepared for discharge below (1 pc), without second glue pot; includes possibility to work with PU adhesive Grooving saw unit vertical into panel 1 pc. incl. pneumatic lifting device - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from panel edge: 14.0 mm Special grooving saw motor with higher power 1 pc. Extraction for jointing unit, internal, on the extraction manifold of the machine Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Protective agent spray system 1 pc. for edge surface – for sensitive edge materials Combined spray system for panels: separating and cleaning agent spray (1 pc) Storage location: Supplier

Stanje: rabljeno, Število vreten: 6 kosov Delovna širina: 230 mm Višina oblanja: 120 mm Stroj za oblanje in profiliranje Weinig tip Unimat 500 za štiristransko oblanje in profiliranje lesa. Stroj ima spominski sistem z elektronskim pozicioniranjem (aksialno in radialno) vreten 2-5. Z ojačanim ležiščem, kompaktno kabino ter v zelo dobrem originalnem stanju. Vključuje: - Brusilni stroj za rezila kot Rondamat 931 - Centrolock glave za oblanje - Glave za profilne nože - Rezervna rezila - Obsežna dodatna oprema. Vreteno 1: Spodaj / 40 mm Vreteno 2: Desno / 7,5 kW / 40 mm Vreteno 3: Levo / skupni motor z desnim / 40 mm Vreteno 4: Zgoraj / 7,5 kW / 40 mm Vreteno 5: Spodaj / 40 mm Hedpfx Abeya Hh Tsxjnn Krmiljenje: Spominski sistem

Stanje: rabljeno, številka stroja/vozila: 008147, Maks. širina panela: 1100 mm Maks. dolžina panela: 2500 mm Dolžina transporterja: 8100 mm Povratek kosov za robno lepilko: desno Hnjdpfexqm Hisx Abxen

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 810 mm, širina mize: 975 mm, TRAČNA RAZREZOVALNA ŽAGA MEBER MOD. SR900 - Dimenzije mize: 975x810mm Hnsdpfx Asx Rt Aaobxjn - Motor: 11kW - Leto: 2000 (CE) - POPOLNA Z NAVODILOM

Stanje: rabljeno, številka stroja/vozila: 008325, Pozicija 1: Enostranski robni lepilni stroj HOMAG-EDGETEQ S-390 - LOOPTEQ O-300 Pozicija 2: Povratna enota za plošče HOMAG-EDGETEQ S-390 - LOOPTEQ O-300 Hnsdpfx Abox Hpklexsn

Stanje: rabljeno, številka stroja/vozila: 007135, Maks. širina plošče: 800 mm Maks. dolžina plošče: 2500 mm Hnedpfst Hmppex Abxjn Povrat delov za robno lepilko: levo

Stanje: novo, Bandsaw Bernardo HBS 460 N - 400 V Technical Specifications Cutting width: 465 mm Cutting height: 280 mm Saw band dimension: 3607 x 25 x 0.6 mm – 3 TPI Saw band widths: 9.5 - 25.4 mm Cutting speed: 420 / 840 m/min Table dimensions: 480 x 630 mm Table height: 970 mm Hedsd N S Urspfx Abxenn Saw table tilt: -5° to 45° Extraction port diameter: 2 x 100 mm Motor output power S1 100%: 2.2 kW (3.0 HP) Motor input power S6 40%: 3.0 kW (4.0 HP) Voltage: 400 V Machine dimensions (W x D x H): 1050 x 800 x 1950 mm Weight approx.: 162 kg Scope of delivery • Saw blade • Parallel fence with magnifier • Mitre fence • Drive wheels made of aluminium • Ball-bearing saw band guide • Motor including brake • Push stick • Operating tools

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Kompaktni stroj za oblačenje robov serije EDGETEQ za mala obrtna podjetja z možnostjo avtomatizacije enot. Osnovna oprema (2020): Krmilnik easyTouch Enota za spojno rezkanje Hnodpfow Tcpmox Abxon Lepljiva enota + 1 rezervni lepilni lonec Rezalna enota z dvema motorjema, pnevmatsko nastavljiva Rezkalna enota z ročno nastavitvijo na ravno, vlaknasto, radij Oblikovalna rezkalna enota/enota za zaobljene robove Profilni strgalnik, pnevmatsko nastavljiv Ravni strgalnik Polirna enota Tehnični podatki (2020): Dolžina stroja [mm]: 4.153 Širina obdelovanca Debelina obdelovanca 8 - 22 [mm]: 70 Debelina obdelovanca 23 - 50 [mm]: 120 Debelina obdelovanca 41 - 60 [mm]: 150 Debelina obdelovanca [mm]: 8 - 50 (opcijsko 8 - 60) Debelina roba [mm]: 0,4 - 3 Podajalna hitrost [m/min]: 11