Enostranski stroj za robove

BIESSE AKRON 1440 A

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, skupna masa: 1.870 kg, Edge banding machine manufactured in 2016. This BIESSE Akron 1440 A is equipped with a pre-milling unit, multifunction milling units, flush trimming, and a corner rounding unit. Furthermore, it features automatic glue application, motorised adjustment of the units, and touchscreen control for easy operation. If you are looking for a high-quality edge banding solution, consider the BIESSE Akron 1440 A, which we are offering for sale. Contact us for further details. • Condition: Used – excellent condition, regularly serviced, fully functional • Availability: The machine can be inspected under power while in production; viewing/test by prior arrangement • Configuration/Equipment (integrated): • Pre-milling unit • Multifunction milling units: R1, R2 • Flush trimming • Corner rounding unit (Rondomat) • Radius profile scraper • Flat scraper • Polishing brushes • Cleaning fluid application device • Automatic glue application • Motorised adjustment of the units • Touchscreen control • IntelliSet system Iiedpfoy Ukixsx Abxjc • FAST adjustment technology • ECO mode • Technical Data: • Power: 13 kW • Power connection: 380 V, 50 Hz, 3 / N / PE • Full load current: 24 A • Required air pressure: 7 bar • Minimum workpiece width: 50 mm • Note: The transport chain is not included in the scope of delivery.

Stanje: zelo dobro (rabljeno), SCM Compact XL Four-Sided Planer Iiodpfolat Hdsx Abxsc - Planing width: 23 cm - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindle driven by a single motor: 7.5 kW each, top spindle: 5.5 kW, universal spindle: 5.5 kW Machine in very good condition

Stanje: rabljeno, številka stroja/vozila: 008127, Pozicija 1: Enostranski robni lepilni stroj BIESSE + FORMETAL-AKRON 1440 A Pozicija 2: Povratni transporter plošč BIESSE + FORMETAL-AKRON 1440 A Iedpsw Tq Iwjfx Abxeic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Oblepilka robov BIESSE Akron 1440A Iiodpfx Abjyh A I Aoxec Na voljo april/maj 2026 CE certifikat Leto proizvodnje: 2017 Možnost pregleda stroja pred nakupom

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 1.400 h, moč: 11,5 kW (15,64 KM), višina obdelovanca (maks.): 50 mm, največja debelina roba: 8 mm, skupna dolžina: 5.860 mm, Single-sided edge banding machine, right-hand version For hot-melt adhesive application. Quick-change gluing unit for hot-melt adhesives. Processing of PU adhesive granules possible in compliance with adhesive processing regulations. Leak-proof glue reservoir located underneath the glue roller. Precisely adjustable adhesive application onto the workpiece via glue roller—no adjustment required for different workpiece thicknesses. Isdpfx Ajyud S Eebxsic Selectable glue roller rotation: with or against feed direction. Glue temperature control via electronic thermostat. Automatic glue temperature reduction during work interruptions. Infrared activation of hot-melt adhesive. Automatic edge magazine for roll material and fixed lengths, incl. roll plate, Ø 800 mm. Fitted with reinforced pre-cutting shear for thick PVC/ABS, max. 3 x 45 mm. Centrally adjustable top pressure. Control panel at the machine infeed. Electronic control system: power control PC 20+ BRANDT control system with color graphic user interface for easy and convenient operation and programming. Technical details: – Swiveling control panel at the machine infeed – Durable short-stroke membrane keyboard – Color graphic flat-screen display – Industrial PC with Compact-Flash disk as mass storage – Unit function keys with LED status indicator – Operator guidance with color pictograms – Online language switching between various foreign languages – Display of key actual and target machine states – Status messages in plain text – Simple selection and correction of setpoints – Easy axis adjustment (with corresponding unit version) – Online help in plain text via an accessible help window anytime – Production data acquisition for production time, edge length and number of workpieces, as daily and total values – Inspection and maintenance interval display – Remote service capability via integrated modem and installed service software – Storage of machining programs – Production according to machining programs – Data backup of machining programs

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, skupna masa: 3.800 kg, Ta 3-osna BIESSE Selco WN 2 je bila izdelana leta 2020. Ima robustno maso stroja 3900 kg in deluje na napetosti 400 VAC s porabo 12 kW. Stroj je zasnovan za učinkovito razrezovanje plošč in ima oznako CE za skladnost. Če iščete visokokakovostno formatno žago, priporočamo, da razmislite o stroju BIESSE Selco WN 2, ki ga prodajamo. Za več informacij nas kontaktirajte. • Teža krmilne omare: 190 kg • Napetost napajanja: 400 VAC • Polni tok: 24 A • Število faz napajanja: 3 • Poraba energije: 12 kW • Frekvenca: 50 Hz • Kratkostna vzdržljivost: 10 kA RMS • Dovod stisnjenega zraka: 6,5-7 bar Iiedpfeyt Rklox Abxsc • Zahtevana hitrost odsesavanja: 30 m/s • Oznaka CE: Da

Stanje: pripravljen za uporabo (rabljen), Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm Iisdpfx Aovu Hgbsbxec - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Stanje: novo, Leto izdelave: 2026, Ne glede na delo, ki ga morate opraviti, je A700 edina žaga, ki jo boste kdaj potrebovali. Z največjo zmogljivostjo v svojem razredu in izjemnim razponom kotov zamika ±75º je zasnovana za pravo rezanje pod visokimi koti brez kompromisov glede velikosti aluminijastih profilov, ki jih je treba rezati. Primerna je za rezanje več profilov hkrati v snopu z visoko natančnostjo. Hitro obdelovanje aluminija z natančnim PLC krmiljenjem gibanja. Pnevmatsko vodena varnostna zaščita se odpira in zapira s pritiskom na gumb ter omogoča popoln in neoviran dostop do žagalne mize. Varnostno stikalo onemogoči delovanje žage ob dvigu zaščite. Izbirno CNC-krmiljeno pozicioniranje kota zamika žage z nadzorno ploščo na dotik. • Ø700 mm TCT žagin list s 4 kW pogonskim motorjem • AS / NZS 4024:2014 varnostni standard, dvoročno rezanje • Nadglavna varnostna zaščita z varnostnimi tuneli po 900 mm na vsaki strani žage • Varnostna zaščita se pnevmatsko dvigne s pritiskom na gumb • Varnostno stikalo onemogoči delovanje žage pri dvignjeni zaščiti • 2x vertikalna in opcijsko 2x horizontalna vpenjala z nastavljivim pritiskom • Kot zamika ±75° s fiksnimi pozicijami na 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75° • Sistem za brizgalno mazanje žaginega lista Iiedpfomb U Tuox Abxsc • Pihalna pištola za zrak in notranja LED osvetlitev • 2 × Ø100 mm priključka za odvod ostružkov • Opcijski 2,2 kW odsesovalnik ostružkov • Opcijski avtomatiziran sistem za krmiljenje zamika Izjemno primerna za: • Serijsko proizvodnjo aluminija • Proizvodnjo aluminijastih konstrukcij pod kotom • Proizvodnjo oken in vrat • Proizvodnjo žaluzij, senčil in pohištva • Proizvodnjo varjenih aluminijastih konstrukcij • Proizvodnjo aluminijastih fasad

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Rabljeni stroj iz likvidacije podjetja. Sekalnik GROSS - Model GAZ 62 - Leto izdelave 2012 - 18,5 kW - dobro stanje Iiedjx Tp U Rspfx Abxsc - takoj na voljo

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: P 04-09-002, neu U05 10 001, Venjakob HGS-K Automatic Spray Machine All images are for reference only - Manufacturer: Venjakob - Year of manufacture: 2004 - Working width: 800 mm (1000 mm) - Current condition: not overhauled - Offer price for overhauled condition - Operator side: right - Dual gun drive system - Dry extraction: 4,000 m³/h Iiedpfoumvr Tex Abxjc - Extraction nozzle diameter: 400 mm - Conveyor belt transport system - Feed speed steplessly adjustable: 3 - 8 m/min - With paint recovery system - Gun control: LS 1 - Installed color circuits: 1 unit - Airless spray system: 4 x Krautzberger KAA 1300 - Number of paint pumps: 1 unit - Pump manufacturer: Wagner 35-70 - Suitable for solvent-based paints - Suitable for water-based paints - Total connected load: 7 kW, current rating: 17 A, fuse: 35 A - Location: in stock - Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide a quotation for installation and commissioning of the system as well as staff training. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!