Verižne plošče

IMA

Stanje: rabljeno, Leto izdelave: 1994, Lokacija skladišča: Nattheim Ledpfswmm Nrox Abbjrg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 151 kg, Vakuumska črpalka Becker VTLF 2.250 NOVO! NA ZALOGI Cena 2.990 EUR + DDV" Vakuumska črpalka Becker VTLF 2.250 je brezoljna vakuumska črpalka namenjena za neprekinjeno delovanje. Uporablja grafitne kompozitne lopute ki ne potrebujejo mazanja. Potrebuje le minimalno vzdrževanje in ne zahteva menjave olja. TEHNIČNI PODATKI: - Moč motorja: 5,5 Kw - Delovna napetost: 400V - Hitrost vrtenja motorja: 950 min-1 - Vakuum: 200 mBAR - Hrupnost: 79 dBA - Teža: 280 Kg PREDNOSTI VAKUUMSKE ČRPALKE VTLF 2.250: - 100% suho delovanje - Kompaktna zasnova Ledpfevc D Ulex Abberg - Nizki obratovalni in vzdrževalni stroški - Tiho delovanje - ni potrebno ohišje za dušilce - Brez-oljno delovanje - Enostavno vzdrževanje - Zračno hlajenje - Dolga življenjska doba grafitnih lamel - Vgrajen notranji filter - ISO standard cer C.E. normativi

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Single-sided edge banding machine in full configuration, including a total of 3 interchangeable gluing units, 1 of which is for PUR adhesive. Material dimensions: Roll materials: - Paper and plastic edging 0.3 - 3.0 mm - Veneer edging: 0.5 - 3.0 mm - Strips 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Machine equipment: Infeed fence, adjustment automatic via program Separation agent application unit Jointing milling unit with 2 motors, each 4 kW Air nozzle for removing loose particles Gluing unit with glue container 1.8 L, with QUICK-LOCK system with single roll / strip magazine 1 main pressure roller and 3 follow-up pressure rollers Pressure zone adjustment automatic via program End trimming unit with 2 motors 660 W, swiveling 0 to 8 degrees Lsdpjybbayefx Abbsrg Profile trimming unit with 2 motors 180 W and 2 motors 400 W max. workpiece thickness 60 mm max. feed speed 20 m/min. Automatic adjustment via program Profile scraper unit Glue joint scraper unit Cleaning agent application unit Buffing unit with 2 motors 180 W Control: ICOS open TS, PC-based

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 19.714 h, Ta IMA Advantage 550 je bila izdelana leta 2010. Rabljeni enostranski robni lepilni stroj z agregatom za spajanje, grelnikom, EVA lepilnim agregatom in magazinom za robni material v roli. Opremljen je z enoto za rezanje, zgornjo/spodnjo rezkalno enoto za poravnavo in profilnim strgalom. Stroj ponuja podajalno hitrost 20 m/min, kar je idealno za učinkovito proizvodnjo. Izkoristite priložnost za nakup tega robnega lepilnega stroja IMA Advantage 550. Za več informacij nas kontaktirajte. Dodatna oprema • Enota za spajanje robov (fugenschneider) • Grelnik • EVA lepilni agregat • Magazinska enota za robne trakove v roli • Rezalna enota • Zgornje/spodnje poravnalna rezkalna enota Lodpfx Abeyaqbwoberg • MFA z 2 motorjema za radij r2, servo krmiljenje • Profilno strgalo • Površinski strgalnik • Polirni agregat (schwabbelaggregat) Prednosti stroja Tehnične prednosti stroja • Podajalna hitrost: 20 m/min Dodatne informacije Stroj je še vedno priključen na elektriko.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Machining Center Rover 20 Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills plus grooving saw, 6-position tool changer. The NC410 control system features a floppy disk drive, color screen, and very simple, graphically assisted programming options. Additionally, the Rover 20 already enables pendulum (dual-zone) machining. Lodpfx Abslc Dwnsbsrg Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Control cabinet: 950 x 700 x 1,300 mm Ex site

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.400 mm, pomik po osi Z: 100 mm, največja hitrost vretena: 24.000 obr/min, število osi: 3, Ta IMA BIMA 410 V je bila izdelana leta 2005. Gre za CNC obdelovalni center za les z integriranim enoto za obrobljanje robov. Značilnosti vključujejo delovno območje osi X do 6000 mm, osi Y 1400 mm in osi Z do 100 mm. Glavna moč vretena je 7,5-11 kW, z razponom vrtljajev od 1.500 do 24.000 min⁻¹. Menjalnik orodij ima 18 pozicij. Možnosti obdelave robov pokrivajo debeline od 0,4 do 3 mm. Za več informacij nas kontaktirajte. Prednosti stroja Tehnične prednosti stroja Lsdpfx Aboyap U Ajberg • Avtomatski rotacijski menjalnik, 18 pozicij • Vertikalna vrtalna glava z do 21 vreteni (11+10) Dodatne informacije Obrobljalni stroj VT 100 Za štiristransko in čelno obdelavo robov Debelina robu: 0,4-3 mm Višina robu: 14-64 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, This IMA Novimat Concept / I / G80 / 440 / R3 edge banding machine was manufactured in 2012. It features a robust automatic edge banding and finishing system, including a workpiece return system for increased productivity. It is capable of processing edge materials from 0.3 mm to 3 mm and workpiece thicknesses up to 60 mm. Equipped with a pneumatic quick-release system and electronic temperature control for precise glue application. Consider purchasing this IMA Novimat Concept / I / G80 / 440 / R3 edge banding machine. Contact us for further information. Additional Equipment • Hinged milling unit: 2 motors, each 4.0 kW, 8800 rpm • Heating unit: Preheating of workpiece edges up to 60 mm • Glue application: Processing of edges up to 3 mm • End trimming unit: 2 motors, 660 kW • Additional units: Milling, multi-profile milling, contour milling, multi-profile scraper and scraper; buffing unit • Automatic Quickmelt hot melt glue feed • Board return system with powered roller conveyors, cross conveyor, belt conveyor, angle transfer, air cushion tables, and safety fence Ljdsx U U D Tepfx Abbjrg Machine Advantages Technical Advantages • Minimum workpiece length: 150 mm / minimum workpiece width: 65 mm / minimum workpiece thickness: 8 mm / maximum workpiece thickness: 60 mm / smallest workpiece: 150 mm x 150 mm or 65 mm x 300 mm Additional Information This machine is configured for efficient edge banding and finishing, featuring robust functions and support for various workpiece sizes. It is immediately available for production use.

Stanje: rabljeno, Leto izdelave: 1988, Razdalja med konicama: 1200 mm Hitrost A) 70 - 380 min⁻¹ Hitrost B) 380 - 2000 min⁻¹ Teža: 2,2 t Lrsdpfxsk Sat Ds Abbog Stružnica za les +++++ Prosimo, upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka nista mogoča. Poleg tega naš oglas vsebuje najbolj informativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This IMA Advantage 310 edge banding machine was manufactured in 2010. It processes workpieces with a length of 150 mm, a width of 65 mm, and a thickness of up to 60 mm. It is equipped for various materials, including particleboard and MDF panels, with melamine, paper, foil, or veneer edges. The equipment includes a gluing unit, a cutting unit, and a buffing unit, which enhance the finishing quality. Take advantage of this opportunity to purchase the IMA Advantage 310 edge banding machine. Contact us for further information about this machine. Machine Benefits Technical Machine Advantages • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with a maximum thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scrapers; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Edge machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: particleboard, MDF • Surface material: direct coating (melamine resin paper), paper, foil, veneer Additional Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Prefabricated edge strips: Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, 15° chamfer Plastic edge up to 3.0 mm, depending on radius tool Milling strips flush up to 8 mm Machine Constant workpiece projection from chain track: 35 mm + edge thickness Max. cut cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Base height (top edge of chain track): 940 mm Unit side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Jointing unit 08.379 and air nozzle 2 motors, each 4 kW, 9000 rpm Gluing unit 283.1513 Glue reservoir 0.8 l, 60 mm high Suitable for hot-melt or PUR adhesive With individual roller/strip magazine, roller diameter 800 mm 3 main pressure rollers and 3 auxiliary pressure rollers Cutting unit 08.415 Pneumatically swiveling to 0° or 8° 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy milling unit SKF-L 4 motors, 12,000 rpm Profile length in feed direction: max. approx. 50 mm Workpiece thickness: max. 60 mm Working speed: max. approx. 20 m/min Distance between 2 workpieces: min. approx. 400 mm Profile drawknife 08.519 For post-scraping of an upper and lower milled quarter-circle profile Self-tracing drawknife unit 08.521 For removing hot-melt adhesive residue in the edge area of the top and bottom of workpieces Lodpfx Abex U U Dtjberg Buffing unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 1.200 mm, skupna masa: 7.200 kg, največja hitrost vretena: 15.000 obr/min, This IMA BIMA CUT 120/240 was manufactured in 2003. It is a CNC woodworking center with a working area of X: 4200 mm, Y: 1200 mm, and a maximum clamping height of 100 mm. The machine features a main spindle with HSK F63 tool holder and a drive power of 7.5 kW. Additionally, it is equipped with a tool changer magazine holding 18 tools and offers a wide range of drilling and milling capabilities. Contact us for more information about this machine. Machine Advantages Quality Features • Drive power: 7.5 kW in S1 mode • Spindle lubrication: permanent grease lubrication from factory • Spindle cooling: water cooling • The automatic tool/adapter changer magazine features a disk changer design with 18 coded magazine slots and moves with the support along the X axis. • The adapter units include a sawing unit (max. 15,000 rpm, 200 mm blade), a horizontal drilling and milling head with 4 spindles (max. 15,000 rpm), a drilling unit for lock cases or sash holes (max. 12,000 rpm), a vertical drilling unit S21 (6,000–9,000 rpm, max. 35 mm drilling diameter), and a horizontal drilling/sawing unit (4,500–6,000 rpm, max. 125 mm groove saw, swiveling range 0 or 90 degrees). • Graphical user interface: imawop for PC • Bima Cut Editor Office • Bima Cut Editor Import Interface • Controller for label printer • Label printer Technical Features • Max. clamping height from top of suction cup Z1: 100 mm • Workpiece thickness Z2: 14 – 38 mm • Working table height: approx. 1000 mm • Alternate field machining area without pendulum operation X: 2 x 2000 mm • Central clearance X without pendulum operation: 200 mm • With pendulum operation X: 2 x 1500 mm • Central clearance X with pendulum operation: 1200 mm • Automatic tool feed Lredpfx Ajx U T Hmobbjg • Feed force: 11,000 N • Rotation direction: programmable, clockwise/counterclockwise Additional Information Machine still under power

Stanje: novo, Typ SK-1000-P6 Arbeitsbreite: 1000 mm Lodpsdmi Niofx Abbsrg Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: Frequenzgesteuert Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtmotorleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querantriebsmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Vorschubantrieb: 2,2 kW Heben-/Senkmotor: 0,37 kW × 4 Schwenkmotor: 0,37 kW × 2 Tischhöhenverstellung: 0,55 kW Transportabmessungen: 3650 × 1850 × 2100 mm Gewicht: 4200 kg

Stanje: dober (rabljeno), IMA BENZ drilling unit 10 + 11 spindle with additional milling unit and horizontal boring head 2 x 3 spindles for IMA 310, 410, 610 If you are looking for another drilling gearbox from Homag or IMA, contact us or visit our webshop on our website. The IMA BENZ drilling unit is a versatile and high-performance tool, specifically designed for IMA 310, 410, and 610 machines. It is a 10 + 11 spindle drilling aggregate with an additional milling unit and a horizontal boring head with 2 x 4 spindles. Here are some technical specifications: Unit No.: 4-08300 and 4-07753 Drawing No.: 000W00004824 and 000M11100819 Motor speed: 1max = 4800 min⁻¹ Spindle speed: 8100 min⁻¹ and 8400 min⁻¹ Drive power: 4 kW Gear ratio: i = 1:1.69 and 1:1.75 Lodpfxsudluds Abberg Milling spindle: For the use of milling tools The unit is pre-owned but in working condition, and offers high productivity due to the ability to perform multiple drillings simultaneously, significantly reducing machining times.

Stanje: dober (rabljeno),

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin Ljdpfedh Tfgex Abbjrg FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, IMA adapter unit, interchangeable module, edge trimming cutter, flat draw blade The IMA adapter unit is a refurbished interchangeable module for edge trimming cutters, equipped with a flat draw blade. With the item number 10 237 069 and an HSK 63 F mounting system, this unit is perfect for precise and secure machining operations. The unit rotates in sync with the drive direction and features a 57 mm opening. It is specifically designed for use with IMA machines and supports tools with bevel cutters. A flat draw blade is included in the scope of delivery. The bolt dimensions are 16/18.1 mm. The unit achieves a maximum speed of 9,000 RPM and a maximum probe travel of 1.5 mm. Thanks to comprehensive refurbishment—during which the unit was inspected, newly re-bearings installed, and pneumatic hoses replaced—it offers top safety and precision with an as-new condition. Used adapter units are removed from operational systems and are fully functional. Should age-related wear or significant loss of precision be present, this will be expressly highlighted. Technical Description Product: IMA Adapter Unit, Interchangeable Edge Trimming Cutter Module, Flat Draw Blade Item Number: 10 237 069 Mounting System: HSK 63 F Condition: Refurbished Rotation Direction: With drive direction Opening: 57 mm Support Bolt: For IMA Tools: For use with bevel cutters Flat Draw Blade: Included Bolt Dimensions: 16/18.1 mm Max. Speed: 9,000 RPM Max. Probe Travel: 1.5 mm Features: • Inspected and fully re-bearings for maximum safety and precision • Pneumatic hoses replaced • Technically as-new condition Please also visit our webshop for more units from various manufacturers. Ledpfx Aeudl Idobbjrg