Linija za robove in obdelavo

IMA+BARGSTEDT+SAG COMBIMA/CONCEPT/II/500/B/R3

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: Predsdt Rgvjpfx Anpec VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Pjdjh Ryhnjpfx Anpsrc Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Psdodh Tfgepfx Anporc Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: rabljeno, številka stroja/vozila: 005107, Storage dimension length: 18,800 mm Psdpfxeiiipus Anporc Storage dimension width: 15,000 mm

Stanje: skoraj kot novo (rabljeno), Four-sided planer Weinig Hydromat H22N - German production - Technical documentation included (DTR) - Year of manufacture: 1992 - Two feed rollers in the table before the first cutterhead - Suitable for wet timber TECHNICAL SPECIFICATIONS: - Planing width: 220 mm Psdpspvi Skofx Anperc - Planing height: 140 mm - Spindle diameter: 50 mm 1st bottom head: 7.5 kW 2nd right head: 7.5 kW 3rd left head: 11 kW 4th top head: 7.5 kW 5th bottom head: 11 kW Hydraulic feed Feed motor power: 15 kW Feed speed steplessly adjustable up to 60 m/min Feed via cardan shafts Electric height adjustment Pneumatic pressure Five feed rollers in the table Eight upper steel feed rollers One upper rubber feed roller Supports on horizontal spindles Jointer on lower spindles Transport dimensions: 500 x 200 x 160 cm Weight: 4 t

Stanje: rabljeno, Technical Details: Cutting diameter: 260 mm Saw band length: 2925 mm Saw band width: 0.9 mm Cutting capacity at 90 degrees, round: 270 mm Cutting capacity at 90 degrees, flat: 350x240 mm Blade speed: 35/72 m/min Floor clearance: 1,050 mm Podsv T Tcmspfx Anpjrc Total power requirement: 1.9 kW Machine weight approx.: 660 kg Machine dimensions approx. (LxWxH): 1.2 x 0.75 x 1.05 m Bandsaw - Semi-automatic Heavy-duty industrial bandsaw with roller conveyor Mitre cutting possible Hydraulic workpiece clamping in stock

Stanje: rabljeno, Leto izdelave: 2009, Numerical Control POWER CONTROL PC 22 Machine suitable for the first and second panel pass Mobile motorized shoulder opening via NC, 3000 mm Maximum panel height: 60 mm PVC-ABS edge thickness: 3 mm Pedpfx Anopp Tkfjperc Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Motorized rubber pressure belt Support rail with retractable pin (distance between pins: 500 mm) Squaring section consisting of: Non-stick unit Time-controlled automatic chip guard unit Double trimming unit Space reserved for future group extensions Gluing unit with pre-melter and glue pot Automatic adjustment of pressure rollers for edging Edge holder magazine with 2 positions Trimming unit with two motors Overlapping cut-off unit Corner rounding group (FK) Scraper unit for edges Glue scraper unit Buffing unit Non-stick unit

Leto izdelave: 2020, stanje: dober (rabljeno), Razdeljevalnik za vročelepilne pištole, črpalka za lepilo, talilni stroj, naprava za taljenje lepila, talilna peč, vročelepilna naprava, vezalec z lepilom -Proizvajalec: Nordson, VersaBlue talilna naprava z dodatki -Tip: VB_ENG Psdpfxoygtnye Anperc -Črpalke: 3 kos zobniških črpalk -Dodatki/posamezne komponente: glej fotografije -Dimenzije: 1070/760/H1380 mm -Skupna teža: 330 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, močan sekljalnik ali drobilnik z motorjem 45 kW, primeren tudi za plastiko širina rotorja: 1000 mm premer rotorja: 360 mm približno 50-60 nožev na rotorju Prjdpfsw Tdudex Anpec Dvigalni transportni trak z magnetnim valjem je mogoče kupiti posebej

Stanje: generalkompletno obnovljen (rabljeno), Single-sided edge processing and edge banding machine (left-hand side) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed rate (adjustable) m/min: 6 - 30 EDGE PROCESSING: Jointing unit with CNC control 08.376 (2 x 4.5 kW) Spraying unit (for liquid release agent) EDGE BANDING SECTION: Lamps for panel edge heating Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for roll material (compartment N° 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0-25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° + spraying unit (for sliding agent) Contour milling unit (for fine trimming) CNC controlled 08.348 (2 x 0.66 kW) Multi-profile scrapers (CNC controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Buffing unit 08.614 (2 x 0.25 kW) Psdpfecr T N Dex Anpsrc Universal milling unit for grooving, rebating, and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Radius sanding unit for straight edges WI (4 x 0.75 kW)