Avtomatska tračna žaga - vodoravna

OPTIMUM Optis 350 GA

Stanje: dober (rabljeno), Leto izdelave: 1971, številka stroja/vozila: 170119003210A0, Offer 25217 Technical Specifications: - Keyway width: 3 to 36 mm - Maximum keyway length: up to 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 – 0.22 mm - Cutting speed: 2 – 10 m/min - Return speed: 20 m/min - Max. tensile force: 1.5 T - Max. workpiece weight: 3 T Dujdpfxowu Suvs Altjw - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Comprehensive accessories included as shown

Stanje: novo, Cutting diameter: 170 mm Saw band dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Cutting speed: 40 + 80 m/min Cutting capacity at 90° (round): 170 mm Duedpsg Trvrsfx Altow Cutting capacity at 45° (round): 125 mm Cutting range at 90° (rectangular): 150 x 190 mm Cutting range at 45° (rectangular): 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (LxWxH): 870 x 1,550 x 1,740 mm This metal bandsaw is supplied with an enclosed worm gear. It is also equipped with a hydraulic pressure regulator and a base frame that can be swiveled by 45 degrees. Additional features include an emergency stop, a complete cooling system, the factory base frame, automatic shut-off, and a quick-release vice.

Stanje: rabljeno,

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Machine repainted in white in 2014 (per SIEMENS ENERGY specification) Technical Data Working Area - Max. swing diameter over bed: 570 mm - Max. swing diameter over cross slide: 365 mm - Max. turning length: 1500 mm - Centre height over flat bed: 280 mm - Max. workpiece weight: 400 / 1000 kg - Max. clamping length: 1300 mm Spindle - Spindle head as per DIN 55027, size 8, internal taper 70 - Spindle bore: Ø 62 mm - Spindle diameter in front bearing: 100 mm - Spindle length (depth): 200 mm - Max. chuck diameter: Ø 315 mm Djdpjx Ahx Djfx Altjuw - Speed range: 3–2500 rpm - Max. faceplate diameter: Ø 560 mm - Max. faceplate speed: 700 rpm - Max. torque: 1800 Nm Cross Slide – Travel - Longitudinal travel (Z-axis): 1160 mm - Cross travel (X-axis): 345 mm - Tool system Parat-3 - Tool size DIN 770 (h x b): 32 × 25 mm Tailstock - Manual tailstock adjustment - Quill taper: MK5 - Quill diameter: 80 mm - Quill stroke: 190 mm Accessories / Special Equipment - Control: SINUMERIK 810 D - 32-bit processor, digital control - ManualTurn with cycle support - 10.4’’ colour LCD monitor - Operating manual 094.0003.1330-00 - 3-jaw chuck Ø 315 mm - Faceplate Ø 350 mm (up to Ø 560 with thin plates) - Radius turning - Turret: Parat size 3, 4-position, 4 × 90° manual indexing - Chip conveyor Bürener Maschinenfabrik - Particularly suitable for: see manufacturing range Cycle lathe DUS560TI (APL 11301) Includes one combined 4-jaw Wescott chuck with fitted jaw set A tool holder (Tripan) is installed – without tools or tool holders One fixed steady rest Chip conveyor with coolant tank and integrated pump The machine is in operation. Currently, no significant defects or limitations in use are known. Operating manual is available. An internal assessment inspection report from 2017 and the machine data sheet are attached.

Stanje: novo, Cutting diameter: 225 mm Saw blade length: 2480 mm Cutting width: 250 mm Cutting speed: 45 / 90 m/min Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting area at 45°: flat 135 x 185 - 145 x 150 mm Cutting area at 45°: round 150 mm Cutting area at 45°: square 145 mm Cutting area at 60°: flat 63 x 107 - 69 x 90 mm Cutting area at 60°: round 70 mm Cutting area at 60°: square 70 mm Cutting area at 90°: flat 240 x 160 - 250 x 110 mm Cutting area at 90°: round 225 mm Cutting area at 90°: square 185 mm Total power requirement: 0.75 / 1.1 kW Machine weight: approx. 200 kg Required space: approx. 1385 x 580 x 890 mm Technical features: - Hydraulic system for controlling saw head descent - Automatic cut-off at end of cut - Powerful three-phase induction motor with 2 speeds and oil bath gearbox - Saw bow, vice, and mitre assembly made from cast steel - Steel saw blade guide with ball bearings - Quick-release vice - Front-integrated lever for mitre angle lock - Coolant pump with aluminium body - Large handwheel for easy blade tensioning - Pressure gauge for blade tension display (600-1000 kg/cm³) - Emergency stop safety switch - Swarf brush for saw blade cleaning STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank Dsdpelb I Daofx Altjuw - Electric coolant pump - Length stop for series cuts - Tools for blade change and adjustments - Chip removal brush - Hydraulic cylinder with feed adjustment

Leto izdelave: 1987, stanje: rabljeno, Sheet width 150 mm Coil weight 80 kg Coil outside diameter 650 mm Mandrel height 1000 mm Expansion range 230 - 445 mm Total power requirement kW Machine weight approx. t Space requirement approx. m motorized decoiler Duedpfx Alsfn Aqletsw

Stanje: dober (rabljeno), Leto izdelave: 1988, Upogibni stroj, abkant stroj, nihajni upogibni stroj, stiskalnica za upogibanje. - Predaja: v trenutnem stanju, kot je bilo ogledano, glejte slike Dujdpfsv Tpxqsx Altow - Delovanje: ročno upravljanje (brez avtomatskega načina) - Proizvajalec: RAFAMET nihajni upogibni stroj Tip KM-4 - Pogon: mehanski - Največja delovna širina: 2020 mm - Največja debelina pločevine: 4 mm - Globina odbojnika: 750 mm - Priključna moč: kW - Dimenzije: 3350/1540/H1510 mm - Teža: 3900 kg

Stanje: rabljeno, Leto izdelave: 1980, Premer žaginega lista: 380 mm Duodped N Sm Dofx Altjw Pnevmatska pritrditev: da Št. stroja: 46893 Teža stroja: ca. 1,3 t +++++ Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega ni mogoče prikazati stroja pod električnim tokom niti izdelava videoposnetka. Naš oglas vsebuje najpomembnejše fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 29-0288, Offer 04612 Technical specifications: - Cutting capacity at 90° round: 260 mm - flat: 450 x 240 mm - Cutting capacity at 45° round: 230 mm - flat: 240 x 200 mm - Machine is mounted on original swiveling base - Saw band dimensions: 3660 x 25 x 0.9 mm Duedpfjgin Ndex Altsw - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure infinitely variable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement approx.: W 2100 x H 1200 x D 1000 mm - Weight approx.: 500 kg

Stanje: rabljeno, Leto izdelave: 2011, Technical Details: Turning length: 310 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Centre distance: 500 mm X-axis travel: 190 mm Z-axis travel: Z1: 335 / Z3: 370 mm Y-axis travel: 80 mm Spindle speed: 6,000 rpm Control: Heidenhain CNC Pilot 4290 Spindle bore: 73 mm Bar capacity: 50 mm Tool turret - Number of stations: 12 Tool holder: VDI 30 mm Rapid traverse X & Z axes: 30 m/min Operating hours (power on): 36,443 h Operating hours (spindle): 8,545 h Interface: yes Total power requirement: 20 kVA Chip conveyor dimensions (LxWxH): 3.2 x 0.45 x 1.5 m CNC Slant Bed Lathe Includes a 3-jaw chuck Ø160 mm with matching flange (max. speed 4,500 rpm) and 2 additional sets of replacement jaws. 12-station turret, all tool positions with live tooling; Sauter disc turret (C-axis = 300 rpm). Main spindle torque: 95 Nm at 100%, 127 Nm at 40% Chip conveyor: 450 K-1/250; Year of manufacture: 2000 Electrical cabinet with Rittal cooling The machine does not feature a hydraulic chuck; a manual chuck has been installed by the previous owner. The machine is offered for sale as non-functional. There is an unknown malfunction in the turret, therefore reference runs and axis movements are not possible. Thus, machining operation is currently not possible. The machine is for sale as in need of repair! i.D. Duodpfx Aow S Efzeltow