Vrtanje z majhnimi luknjami EDM

Weipert SLB

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° – 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Fodpfx Ajx Hgl Hsbtogc Turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time: 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Axes travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Traverse speed: Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed rate: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Dolžina mize 175 mm Širina mize 110 mm Fgodpfx Asxvdr Tobtoc Premer brusnega kolesa 500 mm Skupna potrebna moč 1 kW Teža stroja cca 1,5 t

Leto izdelave: 2025, stanje: novo, Ultrazvočna kad UEC 300 je industrijska rešitev za čiščenje velikih in težkih delov, ki so močno umazani. Naprava je opremljena s pnevmatskim dvigalom s kapaciteto do 200 kg. Delovna frekvenca znaša 28 kHz s sweep tehnologijo. Stroj obsega glavno ultrazvočno kad s tremi stranskimi ultrazvočnimi piezo pretvorniki ter dodatno nadglavno kad z oljnim separatorjem. Upravljanje poteka preko visokokakovostnega HMI zaslona na dotik z 3D prikazi obvestil. Celotna kad je izdelana iz kislinsko odpornega nerjavečega jekla AISI304 s debelino 2 mm. Tehnične lastnosti: Dimenzije platforme: 900x570 mm Največja nosilnost: 200 kg Uporabna višina: 400 mm Ultrazvočna moč: 3 kW (6 kW p-p) Ultrazvočna frekvenca: 28 kHz s sweep funkcijo Moč grelca: 9 kW OPREMA: 7" zaslon na dotik z 3D obvestili Avtomatski sistem za polnjenje vode Avtomatski način delovanja dvigala Senzor nivoja tekočine Senzorji položaja dvigala Fjdegd Uifepfx Abtjgc Senzor pokrova Garancija: 2 leti NA ZALOGI IMAMO TUDI DRUGE MODELE

Stanje: generalkompletno obnovljen (rabljeno), Measuring ranges X/Y/Z = 900 x 1200 x 850 mm Measurement uncertainty 4.0 + 4.5L/1000 (in original condition, currently significantly improved after modernization) Fully modernized in 2018 with Pantec Controller Eagle Pro Fedpfxodpak Rj Abtsgc Probe system: Renishaw PH10MQ with SP25M Completely new software: Inca Premium (other software options available upon request) HP Workstation PC Optional: Laser scanner (e.g. Kreon) Probe changer Rotary table, etc.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 67 h, moč vretenovega motorja: 22.000 W, največja hitrost vretena: 3.300 obr/min, potovalna razdalja osi X: 615 mm, pomik osi Y: 260 mm, pomik po osi Z: 1.585 mm, skupna masa: 16.600 kg, proizvajalec krmilnikov: MAZATROL, število osi: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features simultaneous 5-axis machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine is equipped with a robust tool magazine holding 72 positions and includes both a main and a second spindle to expand its capabilities. If you are looking for high-quality turning and milling functions, you should consider the Mazak INTEGREX i-200 S turning-milling center. Contact us for further details. • Operating time: approx. 68 hours • Availability: Immediate • Key Features: • Full simultaneous 5-axis machining • Main spindle + sub spindle • Milling spindle with automatic tool changer • Complete turning and milling in one setup • Capacity and work area • Maximum swing: Ø658 mm • Swing over cross slide: Ø658 mm • Maximum machining diameter: Ø658 mm • Maximum machining length: 1519 mm • Bar capacity (main spindle): Ø102 mm • Bar capacity (sub spindle): Ø65 mm • Maximum support weight (main spindle): 650 kg • Maximum support weight (sub spindle): 300 kg • Main spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor power: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blower system: Included • Additional equipment: Heavy-duty spindle HD1; removal of standard spindle cylinder and chuck • Sub spindle (HD2) • Chuck size: 8" • Maximum speed: 5,000 rpm • Spindle bore: Ø76 mm • Motor power: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s • Factory option: HD2 spindle synchronization function • Milling spindle • Maximum speed: 12,000 rpm • Motor power: 24 kW • Cooling: oil & air • Tool interface: HSK-A63 (T63) • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: oil & air • Tool capacity: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis travel • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min • Tool system and magazine • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Functions: tool breakage detection in magazine; overload detection • CNC functions and software • 5-axis machining package • 5-axis tool radius compensation • Cylindrical interpolation • Polar coordinate interpolation • Synchronous thread cutting with milling spindle • Cooling and preparation • Coolant through spindle: 7 MPa • Prepared for mist extraction system • Highlights • Practically new condition with only approx. 68 hours operating time • Very extensive factory configuration • Full simultaneous 5-axis machining • Main and sub spindle configuration • 72-tool CAPTO magazine • Production-ready with significant savings compared to new Additional Equipment Fsdpfsy Sltgox Abtjgc • Chip and parts handling • Side chip conveyor - Consep type • Belt conveyor for parts • Bar loading and workpiece handling • LNS QLS II bar loader • Interface kit for bar loader • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70-V-I-R-FM • Year: 2018 • Other accessories • Mounting anchors for the machine • 3-color machine status signal light Technical Specification

Stanje: pripravljen za uporabo (rabljen), Na voljo sta dve enaki stroji, vključno z dokumentacijo. Fodpfjm Rg R Aox Abtogc

Stanje: rabljeno, System: Used piston-diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Flow rate: 40.0 m³/h Fjdpedkdi Tofx Abtogc Pressure: 1.6 MPa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 655 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 36 m/min, hitri pomik os Y: 36 m/min, hitri pomik na osi Z: 30 m/min, proizvajalec krmilnikov: Fanuc, model krmilnika: Fanuc 0i-MD, dolžina obdelovanca (maks.): 400 mm, širina obdelovanca (maks.): 355 mm, teža obdelovanca (maks.): 250 kg, skupna višina: 3.120 mm, skupna dolžina: 2.995 mm, skupna širina: 2.975 mm, premer vrtljive mize: 350 mm, hitrost vretena (min.): 80 obr/min, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 15 letvica, moč vretenovega motorja: 15 W, nos vretena: ISO 40, število mest v zalogovniku orodij: 40, dolžina orodja: 270 mm, premer orodja: 80 mm, teža orodja: 8 g, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Rabljen 5-osni vertikalni obdelovalni center s CNC FANUC 0i-MD Fodpfex N Tm Nsx Abtjgc

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 300 mm Maximum turning length: approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Maximum swing diameter: 525 mm Distance from spindle nose to turret face: 115 – 690 mm Spindle speed range – main spindle: 35 – 4,000 rpm Drive power – main spindle: 22 kW Maximum torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Maximum bar capacity: 64 mm Fgsdpfxexmaguo Abtjc Maximum chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec. Speed range – driven tool positions: 25 – 4,500 rpm Drive power – driven tool positions: 3.7 kW Maximum torque: 35 Nm Speed range – sub-spindle: 35 – 4,000 rpm Drive power – sub-spindle: 7.5 kW Maximum torque: 57 Nm Maximum chuck diameter: 150 mm X-axis travel: 190 (185 + 5) mm Z-axis travel: 575 (580 + 5) mm Sub-spindle (B-axis) travel: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed range X/Z: 0 – 5,000 mm/min Feed range C: 1 – 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirement: approx. 5.0 x 3.0 x 2.5 m CNC turning and milling center MAZAK – Super Quick Turn 250 MS - Main and sub-spindle - Driven tools - C-axis

Stanje: rabljeno, Leto izdelave: 1998, Technical details: Swing diameter: 830 mm Turning length: 4000 mm Swing diameter over bed slide: 540 mm Spindle bore: 130 mm Speed range: 2 - 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed rate: 1 - 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Space requirement approx.: 7 x 2.2 x 2 m Fgedpowwlt Rsfx Abtoc Equipped with R&D MTC-K cycle control MULTIFIX tool holder, size D Coolant system *