Stroj za upogibanje z vrtljivim kolesom
EHT MULTISWING 4 - 32

Leto izdelave

1999

Stanje

Rabljeno

Lokacija

Ahaus

Stroj za upogibanje z vrtljivim kolesom EHT MULTISWING 4 - 32

Podatki o stroju

Oznaka stroja:: Stroj za upogibanje z vrtljivim kolesom

Proizvajalec:: EHT

Model:: MULTISWING 4 - 32

Leto izdelave:: 1999

Stanje:: pripravljen za uporabo (rabljen)

Cena in lokacija

Lokacija:: 48683 Ahaus

Pokliči

Podrobnosti ponudbe

ID oglasa:: A19923675

Referenčna številka:: 1125-9355109

Posodobitev:: nazadnje dne 17.02.2026

Opis

Sheet width: 3200 mm
Sheet thickness: 4.0 mm (mild steel)
Frame opening: 3300 mm
Upper beam adjustment: 400 mm
Adjustment of folding beam: 80.0 mm
Chjdsxaa A Nopfx Agtsa
Max. folding angle: 180 degrees
Max. clamping force: 200 kN
Backgauge: 10.0 - 1600 mm
Oil capacity: 160 liters
Total power requirement: 9.8 kW
Weight: 8500 kg
Dimensions (L x W x H): approx. 4900 x 2000 x 2300 mm
From a maintenance workshop
Good / well-maintained condition (!!)

- In tested condition - machine video -
?v=RY-amZooeX4

Equipment:
- Robust CNC folding machine
- CNC control unit - CYBELEC "DNC 80 PP"
* Swiveling control panel, front right
* 2D graphic display for visualization and multiple simulation
* Graphical 2D programming
* Easy operation
- CNC electric motor-driven backgauge
* Stroke: 10.0 - 1,600 mm
* Pneumatic / retractable gauge fingers
* Adjustable speed up to 250 mm/sec.
* Rear sheet support table with brushes
- Electric motor-driven lower beam adjustment (S axis)
- Electro-hydraulic swinging movement of the lower beam
- Pneumatic upper tool clamping
- Pneumatic lower tool clamping
- 1x movable double foot switch
- Original operating manual + wiring/hydraulic diagram

Special accessories included:
- 1x segmented "gooseneck" upper tool set, H = 150 mm (not complete)
- 1x segmented "gooseneck" upper tool set, H = 200 mm (not complete)
- 1x segmented bending/lower tool
- Rear sheet support with brushes

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2011

750 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 5939 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Soerendonk

897 km

UMENJA
NHH

3.250 €

Fiksna cena plus DDV

Pokliči

Mali oglas

Zavorna stiskalnica EDWARDS PEARSON 100/3100

Kaunas

1.158 km

Zavorna stiskalnica
EDWARDS PEARSON100/3100

Pokliči

Stanje: rabljeno, Leto izdelave: 1997, The press brake was manufactured in 1997 in England at the EDWARDS PEARSON factory. The bending press is in good condition and is being sold complete with tooling. It has always been serviced and maintained on schedule. The machine is connected and can be demonstrated or inspected on site. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Bending force: 100 t Stroke: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Codjrfx Utepfx Agteha Weight: 7 t Other: Newly replaced display, connected keyboard for easier operation. If you have any further questions, we will be happy to assist you.

Poglej podrobnosti

Mali oglas

Birmingham

1.407 km

Mapo
RAS62.25

Pokliči

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Rabljeni CNC preklopnik Ras 62.25 Model: 62.25 Proizvajalec: Ras Leto izdelave: 2012 CNC preklopnik RAS 62.25 Kapaciteta: 2540 mm x 2,5 mm Codpsn Tnzfjfx Agteha CNC avtomatski stroj za krivljenje (leto 2012) Opremljen s kontrolno enoto System 6000 na dotik (zaslon nedavno zamenjan) 3,2-metrski merilnik zadnjega roba v obliki črke J Dvojno nožno stikalo za upravljanje Svetlobne zavese MACHINE GUARD SOLUTIONS Priložena segmentirana in ravna orodja

Poglej podrobnosti

Mali oglas

Stroj za upogibanje pločevine - 3 valji DAVI MCO 2020

Ahaus

878 km

Stroj za upogibanje pločevine - 3 valji
DAVIMCO 2020

Pokliči

Stanje: rabljeno, Leto izdelave: 1992, Sheet width: 2050 mm Sheet thickness: 10.0 mm (steel) Bending capacity: 8.0 mm (steel) Top roller diameter: approx. 205 mm Side roller diameter: approx. 195 mm Control: conventional Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 5.5 kW Weight: 3200 kg Dimensions (L x W x H): 4500 x 1500 x 1300 mm Cjdexacdvspfx Agteha Features: - Robust electro-hydraulic 3-roll plate bending machine - 3-roll concept enables a wide range of bending and rounding operations - Swiveling control unit at the front * Operation and control of all rollers and machine axes * Digital position display * Manual operation via joysticks - Bending diameters of up to 1.1 times the top roller diameter possible - Forged and hardened rolls with a strength of 53-55 HRC - Low-maintenance, stable machine design - Heavy-duty steel welded construction - Electro-hydraulic drop-end for easy removal of rolled pipes - Manometer / pressure gauge for the rolls - Safety device (safety cable with switch unit) - Operating manual (PDF)

Poglej podrobnosti

Mali oglas

Vertikalni obdelovalni center CNC MIKRON HAAS VCE 500

Root

516 km

Vertikalni obdelovalni center CNC
MIKRON HAASVCE 500

Pokliči

Mali oglas

Wiefelstede

932 km

Zgibalni stroj 2000 x 4 mm
RAFAMETKM-4

4.500 €

Fiksna cena plus DDV

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 1988, Upogibni stroj, abkant stroj, nihajni upogibni stroj, stiskalnica za upogibanje. - Predaja: v trenutnem stanju, kot je bilo ogledano, glejte slike - Delovanje: ročno upravljanje (brez avtomatskega načina) Codpfx Agjv Tpxqjtsha - Proizvajalec: RAFAMET nihajni upogibni stroj Tip KM-4 - Pogon: mehanski - Največja delovna širina: 2020 mm - Največja debelina pločevine: 4 mm - Globina odbojnika: 750 mm - Priključna moč: kW - Dimenzije: 3350/1540/H1510 mm - Teža: 3900 kg

Poglej podrobnosti

Mali oglas

Nemčija

780 km

Stroj za odstranjevanje napak
COSTAMD6

Pokliči

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large components. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt length: 2620 mm Equipped as standard with a vacuum holding system, optionally with a magnetic holding system The use of 2620 mm long abrasive belts ensures a consistently smooth surface finish and reduces consumable costs due to the belts' longer lifespan. Thanks to the modular design of the machine, the optimal configuration for the customer's processing requirements can be offered. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, in combination with advanced mechanics and electronics, make this series a universal machining center for deburring and final finishing. Cjdpfx Aonah Tdogtoha Please contact us for further information and images via email (at) or *

Poglej podrobnosti

Mali oglas

Stroj za upogibanje pločevine - 4 valji FALKEN 4 R HMS 1550 x 150

Ahaus

878 km

Stroj za upogibanje pločevine - 4 valji
FALKEN4 R HMS 1550 x 150

Pokliči

Stanje: novo, Blechbreite 1550 mm Blechstärke 6,5 mm Anbiegung 4,5 mm Oberwalzen-Durchmesser 150 mm Seitenwalzendurchmesser 130 mm Unterwalzen-Durchmesser 150 mm Abstand max. OW zu UW 20,0 mm Gesamtleistungsbedarf 2,2 + 1,5 kW Maschinengewicht ca. 2370 kg Abmessung L-B-H 3300 x 1150 x 1110 mm Ausstellungsmaschine - NEU noch nicht in Gebrauch gewesen (!!) Sonderpreis auf Anfrage Ausstattung: - elektro-hydraulische 4-Walzen Rundbiegemaschine * mit angetriebener Oberwalze + Unterwalze Cjdpfxsxabkbs Agtjha * stabile Schweißkonstruktion - Einsatzbereich: * leichte bis schwere Blechbearbeitung (Stahl/ALU/Edelstahl) - elektro-hydraulische Verstellung der Unter- + Seitenwalzen - lineare Führung der Seitenwalzen - Oberwalze angetrieben durch robusten Elektromotor + Planetengetriebe - freibewegliches, separates Bedienpult - gehärtete Walzen SAE 1050 (CK 45) + bombiert - Konischbiegeeinrichtung - 3x Achs Digitalanzeige für genaue Walzenpositionen - elektro-hydraulisches Klapplager - Bedienungsanleitung (PDF)

Poglej podrobnosti

Mali oglas

Univerzalni vrtljivi stroj za upogibanje RAS 6720 2040x3.5

Rödermark

625 km

Univerzalni vrtljivi stroj za upogibanje
RAS6720 2040x3.5

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 27-3, Offer 23317 Technical Data: - Max. working width: 2040 mm Cjdpfsrklfrex Agteha - Max. material thickness at 40 kp / mm² strength: 3.5 mm - Bending angle adjustment, electronically pre-selectable: 0 to 135° - Smallest bending radius: 1.25 x sheet thickness - Minimum internal flange height: 6 x sheet thickness - Automatic sequence control for a complete work cycle - Operation via hand or foot switch - Maximum opening width / stroke of upper beam: 200 mm - Height adjustment: - of the bending beam: 80 mm - of the lower beam: 80 mm - Upper beam drive: 400 V / 1.1 kW - Bending beam drive: 400 V / 1.5 kW - Manual backgauge, accessible from the front - Required space (approx.): W 3300 x H 1350 x D 1500 mm - Weight (approx.): 2600 kg

Poglej podrobnosti

Mali oglas