Hidravlična tekočinska membranska stiskalnica

ITALPRESSE FORMATIC 20.9

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis vertical machining center, the HAAS VF-4SS, was manufactured in 2008. It offers a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer featuring 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, consider the HAAS VF-4SS that we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feed rate: 20.5 m/min Ksdpfx Ajx D Irmsbxedn • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment: • Auger-type chip conveyor • Additional high-pressure filtration system

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, Used swing beam guillotine shear RAS 86.33 with newly ground upper and lower blades, regularly serviced and barely used. Technical Data: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Back gauge depth: 5-1000 mm Working height: 800 mm Strokes per minute: 30-64 spm Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle gauge: 2,195 mm Machine depth with angle gauge: 3,275 mm Machine height: 1,725 mm Ksdpfx Aov Tk Exobxodn Air pressure: 5 bar Frame throat: 100 mm Tank capacity: 150 l

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Krmilna enota Kdsdpfx Abex Enh Tjxsn Blagovna znamka: HAAS Model: NGC Glavni pogon Število osi: 3 Pomiki Pomik osi X: 1270 mm Pomik osi Z: 635 mm Pomik osi Y: 508 mm Ta 3-osni vertikalni obdelovalni center HAAS VF-4 je bil izdelan leta 2020. Omogoča pomik v osi X 1270 mm, v osi Y 508 mm in v osi Z 635 mm ter podpira obremenitev mize do 1588 kg. Opremljen je z 20-postajnim linijskim zalogovnikom orodja, polžastim transporterjem ostružkov ter merilno sondo Renishaw OTS. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra HAAS VF-4. Za več informacij o tem stroju nas kontaktirajte. Vrste uporabe: Rezkanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Log feed, chain log infeed and chain log conveyor line – 20 m Kjdpowlaxkjfx Abxedn Minimum log length: 5 m Maximum log length: 14 m Holtec ES 120 – crosscut saw (year of manufacture: 1995) For cross-cutting and trimming timber in industrial applications Chain log conveyor line – 4 m Cassel Metal Shark® Octa – metal detector Discharge roller conveyor + transfer table – 7 m Control cabin Hydraulic operation Condition: excellent Manufacturer: Holtec Type: ES120 Year of manufacture: 1995

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, skupna dolžina: 2.700 mm, Ponujam novo napravo za velikofromatne termoplastične rešitve za 3D-tisk. Krmiljenje: Stäubli / Cead – Profinet popolno krmiljenje. Robot: Stäubli TX200L – doseg 2700 mm, nosilnost 100 kg. Ekstruder: Cead E25 s pretokom 12 kg/h. Sušilnik VIZMATEC 100 l z avtomatskim dozirnikom za neprekinjeno proizvodnjo. Za generiranje robotske poti se uporablja G-CODE/NC-koda. Kodpfsurvzrex Abxodn

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted. Kedpfxowvqkls Abxjdn

Stanje: dober (rabljeno), Leto izdelave: 2011, Internal flange dimensions: 2340 x 1340 mm Maximum panel size (thickness 20 mm): 2340 x 1240 mm Working chamber height: 60 mm Total pressing force: 300 t Maximum specific working pressure: 5 kg/cm² Press cylinders: No. 6, diameter 140 mm, stroke 250 mm Lower movable platen (upward closing movement) Opening between press platens: 230 mm Loading side: 1400 mm PVC roll unwinder Double loading table Kdedpotwba Sofx Abxen

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 stages Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to main machine body - Piece counter with zero shut-off Kdjdjd N H A Nspfx Abxon Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition

Stanje: dober (rabljeno), Leto izdelave: 1988, Upogibni stroj, abkant stroj, nihajni upogibni stroj, stiskalnica za upogibanje. - Predaja: v trenutnem stanju, kot je bilo ogledano, glejte slike - Delovanje: ročno upravljanje (brez avtomatskega načina) Kdodpfx Aev Tpxqebxsn - Proizvajalec: RAFAMET nihajni upogibni stroj Tip KM-4 - Pogon: mehanski - Največja delovna širina: 2020 mm - Največja debelina pločevine: 4 mm - Globina odbojnika: 750 mm - Priključna moč: kW - Dimenzije: 3350/1540/H1510 mm - Teža: 3900 kg

Stanje: rabljeno, No. 3176 WEINIG Hydromat 1000 Planing and Moulding Machine Used, year of manufacture 2007 6 Spindles: bottom-right-left-top-top-bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Finished lamella width: 4 - 15 mm Max. number of lamellae: 16 pcs Lamella lengths: 400 - 4000 mm 1st spindle horizontal bottom: Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool circle 125 - 180 mm 2nd spindle vertical right: Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left: 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top: 15 kW, 6000 rpm, diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle: Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle: Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of feed rollers opposite left spindle, axial 35 mm Shortened roller distance opposite right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 driven, toothed rollers in outfeed table 2 driven, toothed rollers in machine table Pressure beam ahead of and discharge after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment of upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Subject to errors in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is made in "as is" condition Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Kodpfxeu Agh So Abxodn Subject to prior sale For used machines, any warranty is excluded, the following applies: "sold as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex site