LINIJO (4 STRANICI) velikosti & robu BANDING

HOMAG + BARGSYEDT KFL 525 + KFL 526 + TBH + TSP

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Hjdpfoh E Sghox Anpow Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available

Stanje: novo, Leto izdelave: 2026, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. Hedoiidm Nspfx Anpow - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Loading, unloading, drive-in, mobile ramp 10-ton ramp, 2 m width by TM-GROUP ONE OF THE BEST CHOICES ON THE MARKET ✅ Specifications: - Manufacturer: TM-GROUP - Maximum load capacity: 15 tonnes - Internal ramp width: 2150 mm - Ramp guardrails on both sides - Ramp wheels for easy movement - Central handle for relocating the ramp with a forklift - Adjustable incline angle and flap height - Movable ramp elements equipped with lubrication points - Ramp winch included - Custom ramp dimensions available for an additional charge - Motorised height adjustment available (optional) - ! IMPORTANT: PLEASE SELECT THE TAPER WIDTH BASED ON THE MINIMUM USABLE WIDTH ! ✅ Drive-on grating: - Galvanised grating with anti-slip grooves. Provides a reliable and secure base. Optimal traction and solid support are ensured for both forklift and pedestrian traffic. ✅ Forklift handles (mountable on both sides): - Quick and convenient attachment to a forklift enables transport of the ramp in all directions. The specially designed handle allows for precise manoeuvring, even in tight spaces. ✅ Additional adjustable or fixed safety supports: - Workplace safety is paramount – the ramp is equipped with a support system known from semi-trailer trucks. Sturdy legs guarantee stable positioning under load. ✅ Chain for connecting to truck, trailer or fixed warehouse ramp: - A robust steel chain is another benefit of our ramp, with the securing mechanism preventing ramp movement during loading operations. ✅ Solid side barriers: - Safety barriers with the option to remove or install a frame/roof (roof option available). Hodpfxomt D Sbe Anpjw ✅ Electric ramp height control: - Smooth electrohydraulic lift powered by a high-quality 230 V pump. ✅ Dual-action manual pump: - Hydraulic pump for height adjustment when mains supply for electrohydraulic operation is not available – can be operated from both sides. ⭐️ We offer the following variants:⭐️ - Entry width in 1900–2000 mm, 2150 mm and 2500 mm PREMIUM. - Mobile ramp models with capacities of 10, 15, 20 and 25 tonnes PREMIUM. - Grating thickness 3–5 cm. - Colours: red, blue, black. - Mobile ramp available with tarpaulin.

Stanje: rabljeno, Adhesive application Glue application Adhesive application - Glue application specified for package heights up to 300 mm via 1 application roller - Drive via 0.37 kW worm gear motor - 1 pc left Hsdpfxjcht Nyj Anpow - 1 pc right - suitable for DIMTER HK 200 and HK 400 Dimter spare parts Dimter accessories

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 Hsdsgwbbqepfx Anpew No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, I am selling a 2-head UV drying tunnel, Superfici Essiccatoio UV. Model: Poliedra S.Cure 1650x2 + TT1 3500. Hodpfx Aeffk Etonpew Year of manufacture: 2015. Available immediately. Requires repair: Display, power sources for both UV units.

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), For sale: KURTZ VBR-S3 Cutting Line (complete set: KURTZ VBR-S3 cutting line, KUKA selection robot, VIRO PPZA-1300/24/MZG packaging unit, palletizing, wrapping) EPS block cutting line for maximum block dimensions of 5000 x 1200 x 1200 mm. Optionally, blocks with dimensions 600 x 1200 x 2400 mm can also be processed. Complete U-shaped line consisting of: - Block buffer loading by tipper - Horizontal cutting with automatic wire positioning, featuring dual-frame cutting and wire oscillation - EPS waste/scrap removal system: top, bottom, sides - Side cutting with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic product selection robot - VIRO packaging machine - Bundle turning station for crosswise arrangement - Palletizing of various sizes of EPS panels on wooden pallets or bonded EPS laths as a base under the EPS bundles column - Automatic stacker/palletizer allowing the formation of columns up to 3 meters in height and up to 3 meters in length - Vertical stretch wrapper for automatic wrapping of EPS bundle columns - Inkjet printers and automatic labelers included - Siemens S7 PLC controller Hjdouct Upepfx Anpow - Complete with protective railings with safety switches - High-capacity line, in very good condition, requires approx. 600 m² of floor space (40m x 15m) - Year of manufacture: 2003 - Electrical supply: 400V; 50Hz; 115kW; 300A

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Hsdpoh Ryhnsfx Anpew Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Hodpfx Asdh Tfgjnpjw Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Max. workpiece length: 3600 mm, max. workpiece width: 1400 mm, overall length: 8750 mm, overall width: 5250 mm. Hodpfx Aneqvnl Topew