Celoten obrat: razrez, paletiranje...

KURTZ PROLINE VBR-S3

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, skupna višina: 13.450 mm, skupna širina: 4.135 mm, skupna dolžina: 3.092 mm, nosilnost na odsek shranjevanja: 400 kg, vhodna napetost: 400 V, nosilnost: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13.450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of Manufacture: 2016 Total Load Capacity: 2 x 30,000 kg Load per Tray: 400 kg (evenly distributed) Tray Dimensions: 3625 x 815 mm Number of Trays (approx.): 91 units Touchscreen: 15.6 inch Shuttle Dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power Supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid subject to prior sale. Technical details per Logimat unit: - Maximum total capacity of the Schäfer Logimat: 2 x 30,000 kg - Maximum number of trays (approx.): 91, each 400 kg, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm - Tray dead weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint (approx.): 12.8 m2 - Capacity with 91 trays: approx. 269 m2, each tray approx. 2.95 m2 - Average tray retrieval time: 26 sec - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight without trays: 5,200 kg - Equipped with LogiTilt - Equipped with LogiPointer - Equipped with LogiGate - Equipped with LogiStainless Machines have been professionally dismantled and can be reassembled by the same technicians if desired. Photos and videos of operation and dismantling are available on request via email. Price: special export price Price: excl. VAT Delivery time: in stock We have 3 Schäfer Logimat units in stock. Caedpforu A Atsx Afqoa Machinehandel De Leeuw BV specializes in used paternoster systems from manufacturers such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, skupna masa: 250 kg, nosilnost: 16 kg, We at Binici MB GmbH have additional industrial robots available in-house. All of our robots are fully operational and come with complete accessories. We are happy to provide you with expert advice. Cedsv Diuyspfx Afqeaa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Materials Testing Machine: ZwickRoell GmbH model Z005TN Designed for conducting standard tests on materials and components. It enables precise measurement of tensile strength, flexibility, and other material properties, which are essential in engineering and materials research. Thanks to advanced technology and user-friendly software, these machines provide efficient and safe operation. The device includes accessories for the measurement of tensile, compression, and bending properties of materials. Technical specifications: • Year of manufacture: 2010 • Maximum load (Fmax): 5 kN • Test dimensions: Caodpfxeuna Iue Afqoa - Height (without accessories): 1070 mm - Stroke height: 1000 mm • Frame dimensions: - Height: 1340 ... 1345 mm - Width: 770 mm - Depth: 439 mm • Weight: approx. 110 kg • Power supply: 230 V, 1Ph/N/PE, power consumption approx. 800 VA The machine enables testing of various materials and components, including: • Construction materials: concrete, steel, wood. • Plastics: flexibility, tensile strength testing. • Metals: strength, hardness, and fatigue testing. • Mechanical components: compression, bending, and tensile tests. • Samples in various shapes: thin layers, blocks, tubes. Thanks to the system’s flexibility, tests can be tailored to specific requirements. TAGS: Laboratory Equipment, Materials Testing, EPS Polystyrene, Polystyrene Production, Mechanical Testing, Thermal Conductivity, Material Properties, Building Materials, Quality Control, Engineering Research

Stanje: pripravljen za uporabo (rabljen), Gebruikte blikproductielijn voor de productie van blikken van 73 mm of 99 mm. Verschillende samenstellingen van machines beschikbaar. Bestaat uit: - Krupp Sdvt duplexslitter Casdpfx Aovy Tyxefqoa - Soudronic FBB400 lasmachine - Soudronic poedercoatsysteem voor de binnenzijde - Buitenlakinstallatie - Frei uithardingsoven - Metalbox 65d spin-flanger - FMI A304 kraalwals - FMC 652 sluitmachine

Stanje: rabljeno, Leto izdelave: 2007, No. 3177 Cajdou Atmuspfx Afqoa Grecon Dimter OptiCut 200-1 Optimizing Crosscut Saw Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: Infeed lengths min./max. 3,000 – 5,000 mm Infeed widths min./max. 80 – 200 mm Infeed thicknesses min./max. 38 – 80 mm Max. wood cross-section: 200 x 50 mm End product length min./max. 700 – 1000 mm Average number of cuts per board: 5 Wood types: softwood or hardwood Performance data: Feed speed max. 180 m/min, infinitely variable Time per crosscut incl. braking: 0.7 – 1.2 s Component overview: Pos. 1: Infeed conveyor belt in front of the saw Length 1.5 m, linked to the saw’s feed motor Pos. 2: Automatic crosscut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and built-in waste extraction unit Graphical input terminal, 1/4 VGA display, with numeric keypad and function keys, including OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor/sorting station with drive unit, without ejector Belt length approx. 1.5 m The machine is already dismantled and in storage. The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The conveyor table is included, only the rubber belt is missing. Sale on behalf of client, ex location Austria, without transport and assembly Subject to errors in description and price Optional transport and loading by us possible To avoid misunderstandings, an on-site inspection by appointment is possible and recommended Sale in as-is condition Technical data, condition description, year of manufacture and scope of supply according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale No warranty given for used machines; the sale is governed by “purchased as seen” Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. Casdpotyyn Hofx Afqea 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Documentation available. On-site inspection possible.

Stanje: dober (rabljeno), Multivac termoformirni stroj je trenutno konfiguriran za proizvodnjo hotelskih porcij marmelade, 14 g in 20 g. 32 porcij na cikel. Stroj je primeren tudi za izdelavo ledenih kock, porcijskih embalaž za omake, kečap, jušne osnove ipd. Po dogovoru je mogoče dobaviti tudi celotno linijo z M&P 32-glavim polnilcem in končno linijsko ovijalnico pladnjev (za doplačilo). Csdpfxotp N Dds Afqoaa

Stanje: pripravljen za uporabo (rabljen), Fanuc 6-osni robotski rezkalni center za aluminij in jeklo. X-pomik robota: 10.500 mm. Podaljšan doseg robotske roke (levo in desno): 3.045 mm. Maksimalna dolžina obdelovanca pri profilih: 15 metrov. Največja velikost obdelovanca brez podaljšanega dosega: 10.500 x 3.045 mm. Največja višina obdelovanca: 3.500 mm. 13-pozicijski avtomatski menjalnik orodij: - 12 električnih orodij - 1 merilna sonda Rezkalna glava: Cedpfx Asv Sfk Hjfqoaa - SK40 - 10 kW na vretenu / 12.000 ali 15.000 vrt/min - 7,5 kW na vretenu / 18.000 vrt/min - 4 kW na vretenu / 24.000 vrt/min - avtomatsko mazanje Veliko je možnih konfiguracij, odvisno od vrste obdelovanca. Trenutno sta na voljo dve ločeni delovni območji, lahko pa jih združite v eno veliko območje (za obdelavo večjih kosov) ali jih razdelite na več manjših delovnih območij za manjše obdelovance.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, For sale: ERLENBACH ESA 5 cutting line with VIRO packing machine model PPZA-1300/6 - Year of manufacture: - Erlenbach ESA 5: 2013 - VIRO model PPZA-1300/6: 2011 - Used for less than one month - Maximum block dimensions (L x W x H): 5100 x 1260 x 1260 mm Csdpfjv Hm A Tex Afqjaa - Horizontal cutting: up to 61 oscillating wires - Vertical cutting: up to 11 wires - Cutting speed: 1.5 m/min - Automatic wire positioning - Waste grinding system (top, bottom, sides)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 30.408 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 550 kg, skupna masa: 16.000 kg, kapaciteta rezervoarja za olje: 600 l, leto zadnje generalne obnove: 2024, Technical Specifications of the Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 (as of April) Main press force: 50 t Specific press force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under working conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at bulk density of: 30 kg/m³: 6 to 7 t/hour 50 kg/m³: 7 to 9 t/hour 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspaper): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis Effective transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Cjdpfou Thhrjx Afqjaa Condition of the baler: The machine has been partially overhauled in our workshop and general maintenance work has been carried out. After completion of the overhaul, the baler was tested during operation and is available for sale at short notice. The following overhaul work was performed: General: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel guideways welded and smoothed Hydraulic unit: - Hydraulic oil tank drained, tank cleaned, new oil filled - Oil filter and air filter replaced - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - Menu language set to English in the program - Two key switches on the control panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Limit switch for the flap replaced - Electrics of the wirbulator renewed, connected, and tested Press ram: - All four guide rollers of the press ram removed and replaced - Main hydraulic cylinder dismantled, disassembled, and partially overhauled; cylinder barrel honed, complete seal set replaced, leak test carried out - All plastic wear pads on the press ram replaced Pre-press flap: - Both bearings on pre-press shaft replaced - Both hydraulic cylinders dismantled, disassembled, and partially overhauled; both cylinder barrels honed, complete seal sets replaced, leak test carried out - Scraper flap on pre-press replaced Tying unit: - Two complete needles with wire guide rollers replaced - Needles adjusted and set - All wire guide rollers in the needle heads replaced - Twister fingers replaced - Two twister shafts replaced - All 8 wear plates on the twist mechanism under the twister fingers replaced Scope of delivery: Only the baler is being sold. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. Inspection by appointment. We assume no liability for the technical details or possible errors.