Popolne proizvodne linije nakup rabljenega (19)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Vertikalna blokovna forma: KURTZ mod. MFV (4920 x 1274/1000 x 1240 mm) Osnovni podatki: • Leto izdelave: 2005 • Dimenzije bloka (VxŠxD): 4920 x 1274/1000 x 1240 mm • Obratovalna napetost: 3x400V 50Hz • Priključna moč: 77 kW • BLOKOVNA FORMA s pomično stransko steno • Popoln vakuumski sistem (VACUUM SYSTEM GARDNER DENVER/SIEMENS) • Hidravlični sistem REXROTH-BOSCH • Operativni silos za predhodno nalaganje blokovne forme z odpraševalnim sistemom Nodpfxoucvq Hj Afmocu • PLC krmilnik Siemens in kontrolna plošča na dotik HMI Siemens – zamenjana z NOVIMA leta 2019, izvajen tudi UPGRADE krmilnega programa • Panel na dotik SIEMENS TOUCH SCREEN (zamenjan za NOVEGA, z večjim zaslonom) • Tiskalnik za označevanje/datiranje blokov MATTHEWS • Sistem za iznos blokov z zalogovnikom blokov • Popolna dokumentacija • Stanje: ODLIČNO Možno je prilagoditi maksimalno višino bloka npr. na 4550-4600 mm.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, For sale: ERLENBACH ESA 5 cutting line with VIRO packer, model PPZA-1300/6 Technical data and year of manufacture: - Erlenbach ESA 5: year 2013 - VIRO model PPZA-1300/6: year 2011 - Condition: Used for less than a month (like new) - Maximum block dimensions (L x W x H): 5100 x 1260 x 1260 mm - Cutting speed: 1.5 m/min Ncodpfov Hm A Tjx Afmsu - Waste grinding system: top, bottom, sides Additional information: 1. Full oscillating wire cutting at all stations The machine is equipped with an oscillating wire system operating at every cutting stage: - Horizontal cutting: max. 61 oscillating wires - Vertical (side) cutting: max. 11 wires with oscillation system - Down-cutter station (top-down cutting for packs): also with full wire oscillation 2. Automatic wire setting The automatic wire positioning system operates at key stations: - On horizontal cutting - On the down-cutter station (top-down cutting) 3. Automatic adaptation to block length (5m / 4m) The machine is factory-equipped to handle both 5 meter and 4 meter blocks. Automatic actuator at the down-cutter station: After selecting the appropriate function in the menu (for 5m or 4m blocks), the machine automatically adjusts the clamp actuator and the supporting barrier. This ensures that side front waste, when top-down cutting, always falls exactly in the designated, correct place. No manual adjustments are required.

Stanje: rabljeno, Stretch blow moulding machine by Etek ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles from PET preform blanks Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries, Model Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Ncsdpjkucxlefx Afmou Power rating: 90 kW Power supply: 400 Volt, 50 Hz Net weight approx. 6,000 kg As-new condition

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Naprodaj blokovna vertikalna: Kurtz model Ecomat Osnovni podatki: • Leto izdelave: 2005 • Dimenzije bloka (d x š x v): 1060 x 1320 x 5200 mm Komplet vključuje vložke (za zmanjšanje višine blokov): - 1060x1320x5130 mm - 1060x1320x4000 mm • Električna moč: 400V; 50Hz • Delovni silos Ncodpfxjxq N Amo Afmju • Teža bloka • Inkjet tiskalnik • Popolna dokumentacija Na zalogi imamo tudi druge stroje za proizvodnjo EPS stiropora, kot so: - parni generator - akumulatorji pare - 3x linije za rezanje blokov stiropora - 3x blokovna forma - pre-ekspander Obstaja tudi možnost prodaje kompletne proizvodne linije (skupaj z montažo, zagonom in izobraževanjem zaposlenih).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Sestava vključuje: - Glavni ekstruder: BA130 (Cobra), letnik 2008 Ncjdpoyc Rtxefx Afmou - Koekstruder: CM65, letnik 2008, prodaja za dele - Embosser, hladilna kad, zabijalec žebljev, vlečni stroj, perforator, giljotina – vsi letnik 1996 TEHNIČNI PODATKI – Ekstruder BA130 (Cobra) - Glavni polž: Ø130 mm, dolžina 26 L/D - Razmak osi: 1050 mm - Material polža: XALOY 41CrAlMo7, trdota 1000 HV - Menjalnik: 1:31:7 R - Potisni ležaj: 2 020 000 N - Grelniki valjev: 74,6 kW (7 grelnih območij, 6 hladilnih) - Glavni motor: 205 kW, 1460 obr./min - Izsesavanje: črpalka 4 kW, 100 m³/h, vakuum 700 Hg - Podajalniki: 2x motor 2,2 kW, prenos 1:25:4 R, hitrost polža 112 obr./min Tehnično stanje: Linija deluje, pripravljena za proizvodnjo Konfiguracija omogoča celoten proces proizvodnje fasadnih oblog – od granulata do končnega profila Možna individualna ocena in ogled stroja na lokaciji.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Fully equipped plastic processing line, including: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, mounted on a column. The line comes in parts. - Suitable for co-extrusion applications, e.g. multilayer profiles, strips, technical components. TECHNICAL DATA – BA92 (NOVEL) Extruder - Screw: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm - Barrel: 34CrAlNi7 steel, hardness 1000 HV - Gearbox: ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 Ncodpfjyc R U Aex Afmju - Cooling zones: 4 - Motor: 63.8 kW DC, 210–2100 rpm - Degassing: 2.2 kW pump, 36 m³/h, 700 Hg vacuum - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder - Screw: Ø1¾", length 21D, compression ratio 2:1, two-flighted - Material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt drive 1:1.65 (total ratio 1:27) - Drive belt: type 3VX560, 3 pcs. - Thrust bearing: load capacity 20,000 kg - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Technical condition: complete line, operational, ready for use Application: plastic processing in co-extrusion process Technical documentation available upon request. Additional spare parts included.

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Each line consists of: • Main extruder: BA105 AMUT, year of manufacture 2004 • Single-screw co-extruder: ROYAL EUROPA (Canada), year of manufacture 2005 • Pneumatic raw material conveying system • Cooling table with water bath (AMUT NERG10, 10 m), year 2004 • Puller-saw (TP25, 7 m), year 2004 • Discharge table _____ TECHNICAL DATA – BA105 AMUT Extruder • Screw: Ø105 mm, length 24 L/D • Type: PCD90WEF; VBM105-24-007 • Speed range: 2.66 ÷ 26.6 • Screw material: alloy steel 41CrAlMo7, hardness 1000 HV • Gearbox: ratio 1:65.6 R • Thrust bearing: 1,400,000 N • Barrel heaters: 42.92 kW (7 heating zones, 4 cooling zones) • Main motor: 60 kW, 1750 rpm • Degassing: 2.2 kW pump, 30 m³/h, 700 Hg vacuum _____ Ncedpfx Aoyc R Aaofmsu TECHNICAL DATA – ROYAL EUROPA Co-extruder • Type: 253-100-000, column-mounted • Screw: Ø1¾", length 21D, compression ratio 2:1, twin-flight • Screw and barrel material: AISI 4140 steel • Bimetallic barrel: Ø3" O.D. / Ø1¾" I.D. • Screw hardness: 50–52 RC Gearbox: • Type: ROSSI RCI 100 U03A • Ratio: 1:15.2 + belt 1:1.65 (combined 1:25) • Belt type: 3VX600 (4 pcs) Heating and cooling: • Heating power: 8.9 kW • Heaters: 4+1 • Cooling: 1/16 HP, 4 fans Motor: • POWERTEC Frame 215 TC • Power: 10 HP • Speed range: 0–1750 rpm Technical condition: Both lines complete and fully operational Ready for production of profiles using multilayer co-extrusion Possible sale of one or both lines – according to buyer’s needs On-site demonstration available. Full documentation and photos available. It is possible to purchase a single line for €80,000.00

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, Lager-št. 2846 Demonstracijska enota, compounder ekstruder Tip Alphatec AD-.S 75 z: Segmentnimi polži, so-vrteči, tesno spajajoči, Cilinder hlajen/temperiran z vodo ali medijem Zmogljivost do 1200 kg/h - odvisno od materiala Pogon 250 kW - AC 48 L/D R+W varnostna sklopka 3x oddušni coni, 1x vakuumska črpalka s kondenzatnim ločevalnikom 2x stranski dozirniki tip ZS-B Siemens Touch HMI krmiljenje MOŽNOST DODATNO: Ncodpfx Afei Dtb Ajmou > Filter za talino/zamenjava sita > Sistemi za granulacijo: vlečenje – ST-, vodni obroč – WRG ali podvodna granulacija – UWG > Konfiguracija polža po vaših zahtevah > Doziranje materiala: volumsko ali gravimetrično > Dodatna oprema Obiščite nas v naši tovarni v Wuppertalu. Enota je pripravljena za demonstracijo, termin testnega zagona z vašim materialom po dogovoru.

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h depending on material, consisting of: Kreyenborg SW 100 stuffing unit, 7.5 kW drive BKG single-screw extruder Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled Screw speed up to 143 rpm Screw flight depth 14 mm Installed heating power approx. 35 kW 1x atmospheric degassing with melt backflow device ("Stuffer")* Screen changer, double piston Kreyenborg K-SWE 160 RS backflush with screen area 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Water pump 2.2 kW Nodpfx Afsi Dtb Uemscu By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra charge > * Vacuum pump > Pellet classifier sieve, conveying system, big bag station > Process water cooling unit / temperature control Further pelletizing lines available ex works Wuppertal, please request our current machinery stock list or visit us.

Leto izdelave: 2022, stanje: rabljeno, Model: TQC-650B Maksimalno območje oblikovanja: 650 x 300 mm Maksimalna globina oblikovanja: 125-180 mm Debelina pločevine: 0,3-1,8 mm Širina pločevine: 660 mm Maksimalna hitrost oblikovanja: 30 ciklov/min Tlačni zrak: 0,6-0,8 MPa Poraba zraka: 2,0 m³/min Poraba vode: 0,5 m³/h Nazivna moč: 98 kW Nedeyvh S Hepfx Afmecu Porabljena moč: 69 kW Napajanje: AC 380V, 50Hz, trifazno, štirižično Dimenzije: D 7000 x Š 2000 x V 3100 mm Teža: Približno 5T

Leto izdelave: 2022, stanje: rabljeno, Model: TJ-750 Primerna folija: PP/PS/PET Največja širina folije: 750 mm Razpon debeline folije: 0,35-2 mm Premer polža: 75 mm Razmerje L/D polža: 40:1 Moč glavnega motorja: 110 kW Skupna moč: 350 kW Nedpsyvh Ubefx Afmocu Največja zmogljivost: 300-400 kg/h Napajanje: AC 380V, 50Hz, trifazno, štirižično Dimenzije: D22500xŠ3200xV3600 mm Teža: Približno 15T

Leto izdelave: 2022, stanje: rabljeno, Model: TTF-520AF Nedpeyvh Tqefx Afmscu Območje oblikovanja: 520mm x 400mm Maks. globina oblikovanja: 110mm Debelina folije: 0,2–1,6mm Maks. hitrost oblikovanja: 30 ciklov/min Tlak zraka: 0,6–0,8 MPa Poraba zraka: 3,0 m³/min Poraba vode: 0,7 m³/h Maks. širina folije: 550mm Primerni materiali: PP, PS, HIPS, PET, PVC, PLA itd. Napajanje: AC 380V, 50Hz, trifazno, štirižilno Porabljena moč: 55 kW Nazivna moč: 136 kW Moč ogrevanja: 75 kW Postopek: oblikovanje-prebijanje-rezanje-zlaganje Dimenzija: D10800 x Š4650 x V2670 mm Teža: Pribl. 11,0T

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), For sale: KURTZ VBR-S3 Cutting Line (complete set: KURTZ VBR-S3 cutting line, KUKA selection robot, VIRO PPZA-1300/24/MZG packaging unit, palletizing, wrapping) EPS block cutting line for maximum block dimensions of 5000 x 1200 x 1200 mm. Optionally, blocks with dimensions 600 x 1200 x 2400 mm can also be processed. Complete U-shaped line consisting of: - Block buffer loading by tipper - Horizontal cutting with automatic wire positioning, featuring dual-frame cutting and wire oscillation - EPS waste/scrap removal system: top, bottom, sides - Side cutting with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic product selection robot - VIRO packaging machine - Bundle turning station for crosswise arrangement - Palletizing of various sizes of EPS panels on wooden pallets or bonded EPS laths as a base under the EPS bundles column - Automatic stacker/palletizer allowing the formation of columns up to 3 meters in height and up to 3 meters in length - Vertical stretch wrapper for automatic wrapping of EPS bundle columns - Inkjet printers and automatic labelers included - Siemens S7 PLC controller - Complete with protective railings with safety switches - High-capacity line, in very good condition, requires approx. 600 m² of floor space (40m x 15m) - Year of manufacture: 2003 Nodpfjuct Upox Afmscu - Electrical supply: 400V; 50Hz; 115kW; 300A

Leto izdelave: 2017, stanje: skoraj kot novo (rabljeno), Proizvodna linija za izdelavo kavnih kapsul NESPRESSO Sestavljena iz naslednjih komponent: Poz. 01) Orodja za brizganje kapsul, proizvajalec: FOSTAG AG 1 kos orodje s 16 votlinami Nsdpsw Nriusfx Afmocu 1 kos orodje z 32 votlinami Poz. 02) Dvokomponentni brizgalni stroj, Proizvajalec: ARBURG, Tip: 720A3200-800, Leto izdelave: 2017 Kapsule se proizvajajo kot padajoči kosi.

Leto izdelave: 2000, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, linija za obdelavo / ekstruzijo polipropilenskih plošč do debeline 80 mm in širine 1.200 mm. št. 01 CNC stroj z 8 orodji, Siemens vodenje, miza 2520x1700 mm št. 01 CNC stroj z 8 orodji, Siemens vodenje, miza 2520x1260 mm št. 01 CNC stroj z 10 orodji, Osai vodenje, miza 4.000x1.800 mm št. 01 PPH ekstruder za plošče, širina 1230 mm, z rezalno enoto št. 01 PPH varilni mehanski/pnevmatski stroj za plošče/okvirje št. 01 PPH varilni pnevmatski stroj za okvirje št. 01 PPH varilni hidravlični/pnevmatski stroj za ročaje Ncedsxwnb Iepfx Afmsu št. 01 PPH varilni hidravlični stroj za plošče širine 3.000 mm št. 02 viličar, vsak do 2.500 kg št. 01 PPH drobilnik kapaciteta 100 kg/h št. 03 PPH ročni ekstruderji št. 02 vakuumski dvigovalci vsak 150 kg

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), A complete Respecta epoxy resin metering and casting system is available. 1) Big-bag station for supplying fillers, max. particle size: 0.7 mm, max. bulk density: 0.5 g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, capacity: approx. 230 l each, including level sensors and automatic IBC refilling. 4) Volumetric dosing to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring for resin and hardener temperatures, viscosity range: approx. 350–450 mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting section, capacity: approx. 50 l. Central plant control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC. Overall system casting output: approx. 30 l/min. The system allows for mechanical preparation to retrofit up to 3 additional filler dosing systems. It is recommended to renew the pipes and diaphragm pumps before commissioning. Documentation available. Inspection on site is possible. Nsdpsyt N A Hsfx Afmscu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Ø 710-1000 mm Rohr-Produktionslinie für PVC-Rohre. Nodjvzqy Sepfx Afmocu

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 9.743 h, Komplette Rohr-Extrusionslinie für Njdpevztb Sofx Afmecu Doppelwandige Wellrohre – 150 mm bis 350 mm Materialtrockner und -förderer – M+H Equipment, Deutschland Duo-Extruderkombination – Battenfeld 90/75 – Typ PEX-1-75-30B, Deutschland Spezial-Spritzkopf – DWP 270 – UC500 Von 90 mm Innendurchmesser bis 270 mm Außendurchmesser Spezial-Spritzkopf – DWP 630 – UC500 Von 160 mm Innendurchmesser bis 500 mm Außendurchmesser Unicor, Deutschland Korrugator – UC 500/40, hergestellt in Deutschland Extrusionskopf und Satz Formblöcke – 1 Satz für DWC-Rohre mit 150 mm, 200 mm, 250 mm, 300 mm und 350 mm Innendurchmesser, Unicor, Deutschland Kühlsprühbad – UCSB 500, Maschinennummer: Unicor, Deutschland Planetssäge – SICA, Modell – TRK/D/SY 10-500 Rohr-Ablageeinheit – 500

Leto izdelave: 2011, stanje: dober (rabljeno),