Razdelilnik vlog / giljotina

Klanke RGS35

Stanje: novo, - Motor power: 9 kW - PLC-controlled, two-hand safety control system - Cutting force: 35 tons - Splitting table: straight version - Cutting channel: - Max. blade length: L = 2000 mm - Max. opening: H = 1200 mm - Machine weight: approx. 4 tons - Hand guard grating in the control panel area and on the opposite side - Forklift pockets included (facilitates easy transport of the machine by forklift) Codjtvm A Tjpfx Afnogp Made to order Price and further information on request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. Cgjdpfovgrh Usx Afnep The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: novo, Roll splitter for shredding defective rolls of paper and film - Motor power: 9kW - Control system: PLC-based, with two-hand safety control - Cutting force: 35 tons - Splitting table: straight design Cgjdjtvgzbopfx Afnop - Cutting channel: - Max. blade length: L = 2000 mm - Max. opening height: H = 1200 mm - Machine weight: approx. 4 tons - Colour finish: RAL 5012 – light blue - Hand protection grid in the area of the control panel and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift) Stock machine – available immediately

Stanje: novo, The solution for shredding large, long pipes and profiles. The ZRS series is specifically designed for the size reduction of pipes with diameters up to 1,300 mm and made from various materials such as PE, PP, and PVC. These machines are capable of directly shredding plastic pipes up to 9 meters in length without the need for pre-cutting or sawing. At the heart of the system are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently process the material at low rotational speed. The pipe is fed into an enclosed feed trough, where it is pressed against the rotor by a hydraulic pusher. The pre-shredded material is then conveyed via a belt to a granulator. The granulator reduces the material to directly processable regrind. The entire system is automatically controlled via a central control unit. Further advantages of the system include low energy consumption, prevention of power peaks, and minimization of accident risks during the pre-shredding process. Csdpfoghgd Iox Afnsgp

Stanje: novo, Leto izdelave: 2024, Hacker knives 40 x 40 concave Blades for Weima, Gross, etc. For almost all common chippers/shredders Available from stock in Bitburg Cgsdpfxsbxu Dhj Afnop Subject to prior sale

Stanje: novo, Leto izdelave: 2026, Comprising Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency inverter (FU) – this controls the speed of the sliding floor. The bales are placed on the sliding floor and the feed of the milling unit is started. The tines of the milling unit tear the straw from the bale and throw it into the hopper. Ideally, the bale breaker is combined here with a straw shredder. Technical Data Bale Breaker: Capacity: 1–2 bales per hour, up to a maximum of 600 kg per hour (depending on sieve size used in the straw mill, kW rating of the straw mill). Without the straw mill, the bale breaker can process up to 900 kg/h of straw. Max size square bale: 2400 x 1200 x 800 mm (L x W x H) Milling unit motor: 5.5 kW, 380 Volt Sliding floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for larger straw shredder (18.5 kW) + €3,940 net Technical Data MHZ with Special Hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Sieve with interchangeable inserts available in (10, 12, 15) 22, 30, 45 mm perforation With star-delta switch, overload protection, and 8 m power cable, ready to plug in Blow-out spout 160 mm Blow distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options at additional cost: Feeding auger + €970 net Cyclone (suspension to be provided by customer) *should be no more than 10 m away + €2,970 net Simple filter €1,750 net --- Other options: Industrial extraction system (ex-demo) + from €9,950 net Optional rotary valve *renders material pressureless + €5,750 net Control system: from €1,620 net Cedsb Nulhjpfx Afnegp Special breaker extension 3 m (*other dimensions must be calculated) + €9,750 net Briquette press MPP 180 S; little-used demo unit 70 mm briquette – up to 100 kg/h from €39,700 net * Larger machines upon request --- Description: muetek bale breaker has been developed for dissolving round and square bales of hay and straw. The shredder attached to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale can be placed using a front loader. The support surface is adjustable depending on the bale type. The chain conveyor pushes the bale against the milling rotor, with adjustable feed speed. The milling rotor is equipped with several teeth that tear up the straw bale. The straw separated from the bale is ejected. --- Basically, the machines are suitable for dry input materials: - Straw - Hay --- Disintegration of hemp is only possible with a special breaker Surcharge approx. €9,720 net (depending on version) Shredding of hemp is not possible with the straw mill. Requirements for the input material: Maximum moisture content 12%

Stanje: dober (rabljeno), Leto izdelave: 2006, obratovalne ure: 1.522 h, Znamka: Husmann Tip: SPB 22 SEN-E Leto izdelave: 2006 Csdpfx Aexbpr Ajfnjgp Prostornina: 22 m³ Izpustna vrata: zgoraj obešena Priklop: kavelj spredaj

Leto izdelave: 2024, stanje: novo, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and various other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all required machinery from us. Just ask! With Josan & Söhne Maschinenbau Profit from copper recycling! ‼️We are happy to demonstrate the machines to you live in Heilbronn! By appointment only‼️ We are a German company based in Heilbronn — German laws, warranty, and service! We also speak English! We are happy to advise you on all recycling-related matters! Material separation solutions for all areas of recycling – just ask. Electrostatic separator for separating plastics from copper, iron, or other materials. You can also separate plastics from metals in uPVC windows. Separate plastics from sand or different types of plastics from each other. ➡️Motor: 6.59 kW ➡️Dimensions (LxWxH): 4000x1400x3000 mm Cedpoqvmpfofx Afnjgp ➡️Weight: approx. 1,000 kg ➡️Throughput: 150–300 kg per hour Price on request! Errors excepted Images, prices, and equipment details may vary.

Stanje: rabljeno, številka stroja/vozila: 11629, Rotor diameter: 450 mm Rotor width: 800 mm 5 x 5 knife rotor (staggered arrangement) 2 rows of stator knives Infeed opening approx. 600 x 800 mm Drive motor: 55 kW Csdsghgqaepfx Afnegp Equipped with soundproof enclosure, mobile

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 2.632 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 29.381, stiskalna sila: 35 t, širina odprtine za polnjenje: 620 mm, dolžina polnilne odprtine: 1.000 mm, skupna širina: 2.380 mm, skupna višina: 2.500 mm, skupna dolžina: 6.625 mm, Vključno z dovodnim trakom. Stroj je takoj pripravljen za uporabo. Cgjdpfx Asvaw T Ajfnop