Stroji za obdelavo robov

Homag KFL 526\9\A3\30

Stanje: rabljeno, številka stroja/vozila: 008412, Tip nameščenega roba: tanek rob, debel rob Lepilni sistem: EVA Multifunkcijska enota: da Stroj za lepljenje robov: Stroj 1 in 2 Največja podajalna hitrost: 40 m/min Godpfx Afoyilxmewoua Delovne enote, desna stran: 11 kosov Delovne enote, leva stran: 11 kosov

Stanje: rabljeno, Tornio Landonio TMU 1200 Gjdpfx Afeizxvkeweua

Stanje: dober (rabljeno), Weinig Hydromat H23 50 mm vretena, 6.000 obr./min Spodní frézka připravena, 15 kW Pravá frézka připravena, 11 kW Levá frézka připravena, 11 kW Pravá frézka připravena, 11 kW Levá frézka připravena, 11 kW Horní frézka připravena, 15 kW Spodní frézka připravena (rovinná frézka), 11 kW + ložisko na konci hřídele Gusdswmw Nvjpfx Afwoa Horní frézka připravena (rovinná frézka), 11 kW + ložisko na konci hřídele Spodní frézka připravena, 15 kW Možnost dodatečného osazení dalšími rovinnými nebo profilovými frézami dle potřeby! Motor posuvu 15 kW Automatický mazací systém Možnost dodání vstupního a výstupního dopravníku k hoblovce dle potřeby. Možnost nabídky nástrojů dle požadavku.

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Finger Jointing Line for Cross-Sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL – Tilt Destacking Station - SH/4t - 1.75x1.75x6.00 m - 4 t – minimum length 2.50 m, semi-automatic singling of the package. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions: 1.75 x 1.75 x 6.00 m. Maximum stack load: 4 t Minimum wood length: 2.5 m 2. HOWIAL – Lamella Singling Unit VE 1 to cross-cut saw. With pneumatically controlled tongues for sorting material marked for defects, placing it onto the underlying roller conveyor. 3. HOWIAL – Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and recording system for automatic moisture detection and monitoring using the resistance method in cycle measurement mode. 4. Gann DMT-8 Digital wood moisture measurement, control, and recording system for automatic moisture detection and monitoring using the electrical resistance principle in cycle mode. Installed in a large control cabinet with inkjet printer. 5. HOWIAL – Cross-Cut Saw AS-30 B Pneumatically operated under-table cross-cut saw with two automatic feed units and automatic cross-cutting. Control by special photo cell for detecting fluorescent line marks. Automated waste removal possible. Saw motor power: 7.5 kW Saw blade diameter: 700 mm Feed drive: approx. 2 x 1.5 kW Air pressure: 8 bar Max. feed speed: approx. 60 m/min 6. HOWIAL – Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width: 350 mm Belt length: 2000 mm Belt speed: 0.4 m/s 7. HOWIAL – Double Roller Conveyor RO-2, 6.00 m long Incl. cross transport. Finger jointing automation feeding. Driven by round belt, all rollers are powered. Cross transfer via chain conveyor. Eject ± moisture to the right. Adjustable transport speed up to 100 m/min. Length: approx. 6.00 m Roller width: approx. 400 mm Godpfx Afei Ezx Dswsua Diameter: 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Feed-in lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Press force: 5 - 22 t Spindle diameter: 50 mm Finger profile: 15/15 Spindle speed: approx. 6000 rpm Total electrical connected load: approx. 62 kW Machine weight: approx. 9 t Gluing system: OEST comb application system for PU Modern Telemechanique PLC (SPS) Control 9. HOWIAL – Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical data: Height: 920 mm Length: approx. 12,000 mm 10. Safety Guarding Fences including safety switch 11. Finger Joint Test Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Adjustable support distances, built-in measuring scale, automatic calculation of support distances in software. Fully automatic test process triggered by mouse click on PC (not included). Alternatively, test process can be triggered by push-button on front panel. Connection to any standard PC or laptop (Win 2000/XP) via included RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. compression force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISMANTLING

Stanje: rabljeno, Leto izdelave: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of Manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with corner transfer Guedeu Afu Rspfx Afwoa Consisting of: 1. Infeed conveyor, length 3,050 mm 2. Open space for sanding machine (optional) 3. Automatic spray machine VEN SPRAY PERFECT, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm 5. Jet dryer VEN DRY AIR JET, length 4,160 mm 6. 180-degree corner transfer with jet dryer 7. Supply air system for corner transfer, 25,000 m³/h 8. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 9. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 10. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 11. 3D-UV Dryer, VEN DRY UV, GA + HG 12. Discharge area, belt of UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request

Stanje: novo, Table length: 2,200 mm Table width: 1,500 mm Lifting height: 1,850 mm Load capacity: 2,000 kg Gedpfx Afoupxwkjwsua Minimum lifting height: 260 mm Total power requirement: 1.5 kW Lifting speed – upwards unloaded: 40 sec Lifting speed – downwards unloaded: 30 sec Connection voltage: 400 V Machine weight approx. 0.45 t Space requirement approx. 2.2 x 1.5 x 0.26 m The hydraulic lift tables are electrically powered and operated. Equipped with a contact strip for safe lowering operation. Highly versatile – suitable for workshops, assembly departments, loading bays, and more.

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 3.178 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 667171, skupna masa: 1.154 kg, nosilnost: 210 kg, doseg roke: 3.096 mm, This is a KUKA KR 210 R3100 ultra, year of manufacture 2018. We are happy to offer you the robot as a fully refurbished unit as well! The robot includes the following options: - BoardPackage - EthernetKRL - LoadDataDetermination - Profinet KRC-Nexxt - RemoteService Guedpfx Ajrnrprsfwoa - SafeOperation - UserTech

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Oil burner Weishaupt WM-L10 Year of manufacture: 2008 We speak Russian! Viewing by prior telephone arrangement only! Preferred sale to dealers, tradespeople, or for export. All information provided without guarantee. Subject to errors and prior sale. Godpfji Ap Atox Afwsua The seller accepts no liability for typing errors or transmission mistakes. We are happy to purchase your used boiler or burner! Of course, we also handle all formalities. Loading is possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Gsdpfx Afjh E Sghoweua Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms Guodpfsfi Tg Hsx Afwea External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30