Stroj za stružnico

LANDONIO TMU 1200

Stanje: rabljeno, Tornio Landonio TMU 1200 Gsdpfxsizxvks Af Sjbk

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, širina na sredini: 390 mm, višina središča: 310 mm, skupna masa: 61 kg, vhodna napetost: 230 V, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 3.500 obr/min, nosilec vretena: MK 2, moč: 0,75 kW (1,02 KM), • Solid cast construction of the headstock, tailstock, and support ensures smooth operation. • User-friendly operation of the cast tool rest. • Induction motor delivers high torque even at low speeds. • Digital speed display. • Edge of the tool rest made from hardened steel. • 24-position indexing for locking the workpiece. • Storage compartment keeps your centers always within reach. • Ejection pin and key for securing the faceplate. • Pre-drilled holes for headstock lighting. • Simple assembly of accessories: stand, extension, lighting, and mobile base. • Machine bed width is 160 mm! The mid-size LAGUNA 1216 wood lathe is distinguished by its robust components: cast-iron headstock, tailstock, precisely ground bed, and tool rest with a hardened steel edge for increased durability. Another highlight: ergonomic control panel made of anodized aluminum with a Duralumin speed control knob. Working speeds: 50–525, 325–1750, 650–3500 rpm. Infinitely variable speed control via the Duralumin dial, and switching between three gearing ranges using a simple lever mechanism. The advanced motor technology ensures high torque, even at low speeds. Tailstock locking at the rear: unobtrusive during operation but always within easy reach. Ergonomic handles with eccentric locking for secure holding. • Model: REVO 1216 • Recommended use: Professional production • Power (230 V): 750 W • Speed: 50–525, 325–1750, 650–3500 rpm • Max. working diameter over bed: 310 mm • Distance between centers: 390 mm Gbodpfx Aotuuv Nof Sok • Spindle thread: M33 × 3.5 mm • Headstock / tailstock taper: MT2 / MT2 • Tool rest / tailstock bore: 17 / 17 mm • Quill travel: 63 mm • Tool rest post diameter: 25.4 mm (1") • Dimensions (L × W × H): 750 × 226 × 442 mm • Weight: 56.3 kg • Dimensions including packaging: 750 × 226 × 442 mm • Shipping weight: 61 kg • Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: • Drive center • Live center • Faceplate • Tool rest • Ejection pin with brass tip • Spindle locking key

Stanje: novo, Bandwidth 100 mm Belt length 920 mm Belt speed 7.0 m/sec Support surface 300 x 150 mm Motor 0.44 kW Motor 400 Volt Godpfxsxaappo Af Ssbk Dimensions L-W-H 470 x 370 x 210 mm MADE IN GERMANY Equipment/features: - Robust electrically-powered belt grinding machine - Powerful drive motor - Includes sanding belt - Includes workpiece stop - Manually adjustable deflection roller - Machine base/stand - Connection cable with plug - Operating manual in German

Stanje: zelo dobro (rabljeno), Genini Miniautomat Through-Feed Lathe Automatic lathe for machining squared timber Main spindle with dual-speed motor, power 4.9/5.9 kW Hydraulic pump motor power: 1.5 kW Maximum timber length: 950 mm Maximum turning length: 120 mm Maximum turning diameter: 80 mm Two carriages with profiling tools 1 face spindle for drilling or face profiling 1 rough turning tool Machine weight: approx. 1800 kg Gsdpfx Afjv Hgcte Sebk

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Manufacturer: Elumatec Type SA / SAS 142 Year of Retrofit: 2024 Max. Carbide Saw Blade Diameter: 500 mm Saw Motor Power: 4 kW Saw Motor Speed: 2800 rpm Saw Blade Cutting Speed (500 mm): 4400 m/min Saw Height Adjustment: Infinitely variable, fully electronic Working Area Square 90° max.: 130 x 130 mm Working Area Flat 90° max.: 190 x 130 mm Working Area Round 90° max.: 150 mm Pneumatic Feed Length: 5–560, 10–1120 mm Compressed Air Connection Required: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900 mm x 1400 mm x 1500 mm Footprint LxW: 2900 mm x 1400 mm Additional Description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics Following the completed retrofit, the machine is in as-new condition both technically and visually. The machine is completely overhauled at our facility to customer specifications. Among other upgrades, the following components have been renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve assemblies - Maintenance of minimum lubrication system Gbedeuiy Nyepfx Af Sok - Replacement of general wear parts - Refurbishment of the safety enclosure Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts refurbished or replaced by us. Labor and wear parts are excluded from the warranty. Optional: - Extension of the cutting range for flats at 90° max.: 300 x 120 mm - Spacer extension (for a premium cut surface without drag marks) - Servo-driven material feed - Servo-driven saw blade feed - Heavy-duty clamping device for material feed pusher - Delivery and installation at your facility - Operator training for your staff

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Gbsdpfxjrigxye Af Ssk Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: novo, Sheet thickness: 1.6 mm Pressing force: 4 t Blade length: 156 mm Adjustable angle: fixed, from – to degrees Table area: 450 mm x 305 mm Godpfx Ajftd Uajf Sjbk Total power requirement: manual operation (kW) Machine weight: approx. 95 kg Dimensions (LxWxH): 530 x 380 x 480 mm

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Godpfx Aowyda Uof Ssbk Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min Gbsdpfevu Hgbex Af Sjk - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, hitrost vretena (min.): 18.000 obr/min, največja hitrost vretena: 2.800 obr/min, montažni premer: 300 mm, dolžina pomika po osi Y: 1.800 mm, CNC lathe with two stations – Efficiency, precision, and productivity in cylindrical workpiece machining The CNC lathe with 2 working units and numerical control is a modern solution for machining cylindrical wooden components—such as columns, table legs, or decorative elements—providing accuracy, repeatability, and efficiency in any workshop or manufacturing environment. Double performance with independent units Equipped with two working units that can operate simultaneously or independently, the lathe enables rapid machining of workpieces up to 1200 mm in length. It is ideal for serial production of furniture components, ecclesiastical elements, or artistic objects. Robust construction for durability The welded bed from rectangular profiles, thermally treated, provides stability and resistance to torsion. Linear guides on the X, Y, and Z axes ensure precise, vibration-free movement. Precision through numerical control Hybrid servomotors, together with the rack-and-pinion system, guarantee exact positioning and efficient control on all axes. The manually adjustable tailstock with four fixing points stabilizes workpieces during complex operations. Advanced motors and cooling Water-cooled motors allow operation at speeds up to 18,000 rpm without overheating, ensuring constant workflow and extended service life. Smart DSP control The DSP control unit with internal memory enables fast file import, project resume from the stopping point, and real-time parameter adjustment—ideal for a continuous and efficient production flow. Auxiliary precision and maintenance systems Self-centering chucks hold workpieces securely, while optical sensors and automatic lubrication systems ensure precision and low maintenance. Key advantages - Perfect repeatability, even for high-volume production - Operational flexibility with independent working units - Robust construction and energy efficiency This CNC lathe is designed to deliver consistent performance, high quality, and adaptability in wood machining, making it the ideal choice for modern workshops or furniture factories aiming to optimize their production processes. Maximum working length: 1200 mm Maximum working diameter (Ø): 300 mm Number of working units: 2 Control: DSP Gbedpfxjwhbgue Af Sok Workpiece rotational speed: 0–2800 rpm Motor power: 4.5 kW Spindle speed: 18,000 rpm Inverter: “BEST” inverter Drive motors: Hybrid servomotors Maximum feed rate: 50 mm/s Accuracy: 0.0125 mm