Hebrock nakup rabljenega (51)

Stanje: rabljeno, Leto izdelave: 2018, Edge Banding Machine AKV 3006 DK-F with Jointing Cutter Unit including DIA Tools - Jointing thickness up to 40 mm - Workpiece thickness up to 3 mm - Combination milling station Radius R 2.5 mm Nledpfxoxfh Tmj Agwjh Technical Description: - Hot-melt glue application to the workpiece for edge materials up to 3 mm - Workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable knives (combination design) and fine adjustment of the cutter from the operator side - Provision for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double roller top pressure beam - Aggregate viewing window from the rear and operator side of machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m / min - Panel thickness: 8 - 40 mm - Weight: depending on configuration approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment (1 pc) Switchable radius/chamfer for combination milling stations. Switching between chamfer or flush is manual by repositioning the stop flap inside the machine. Buffing unit (polishing mop): 1 pc Corner rounding cutter: 1 pc, incl. combination tool and pneumatic radius/chamfer adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper: 1 pc, incl. pneumatic retraction device, radius R 2.0 mm Flat scraper: 1 pc with pneumatic control Glue station quick-change system including second glue pot and downward glue discharge (1 pc) for rapid color change Horizontal grooving saw unit into the edge: 1 pc, incl. pneumatic retraction and groove tool Separate extraction for jointing unit: 1 pc, direct connection on the jointing unit, vertical above, d = 80 mm for optimal extraction performance; strongly recommended from model AKV 3005 DK-F Ball bearing for corner rounding cutter, 24.1 mm: 1 pc Ball bearing for corner rounding cutter, 24.2 mm: 1 pc Replacement motor 0.37 kW for corner rounding cutter, with quick-change system including radius cutter R 1 Replacement spindles, 1 set = 2 pcs 1 set quick-change motors for longitudinal machining, top and bottom, including tool R 1 Compressed air requirement: 100 – 150 l/hr Location: Nattheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, maks. debelina roba: 3 mm v roli / 8 mm v traku Enota za rezanje role Krožna žaga Poravnalni rezkar, kombinirani rezkar Dimenzije: približno 3300 x 1400 x 1300 mm (DxŠxV) Teža: približno 550 kg Nodpfxjxpu N Ns Agwelh

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3074, hitrost podajanja osi Y: 10 m/min, skupna dolžina: 4.984 mm, višina obdelovanca (maks.): 60 mm, skupna širina: 1.425 mm, največja debelina roba: 3 mm, skupna višina: 1.618 mm, skupna masa: 1.400 kg, vrsta vhodnega toka: trifazni, vrsta nastavitve višine: mehanski, vhodna napetost: 400 V, premer ekstrakcijske šobe: 140 mm, delovna višina: 888 mm, vhodni tok: 32 A, vhodna frekvenca: 50 Hz, premer povezave za izpihovanje: 140 mm, leto zadnje generalne obnove: 2025, For sale due to the purchase of a new machine: our reliable edge banding machine, bought new in 2016. The machine operated in an 8-person carpentry workshop. It underwent a complete refurbishment in January 2025, which included new radius scrapers, new milling tools, and new polishing discs. The pre-milling unit was sharpened; the glue roller clutch was replaced. The glue tank was fully refurbished and cleaned. The machine is suitable for both EVA granulate (e.g. Henkel Dorus KS351) and PUR adhesive applications. The pre-milling amount, edge banding material thickness, and upper/lower milling tool positions can be conveniently adjusted from outside the machine housing using handwheels. The control system allows you to save custom edge banding programs. For 0.4 mm and 2.0 mm edge materials, the machine switches pneumatically between programs. Main Specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100-150 l/min) - Touchscreen display Njdexlr S Hjpfx Agwjlh - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness from coil: 0.5-3.0 mm - Workpiece thickness: 8-60 mm (edge banding possible on 60 mm thick material) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm for end trimming saw / 220 mm for end rounding - Processing units: - Diamond pre-milling unit (12,000 rpm) - Release agent tank/spray - Gluing unit - Edge trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/spray - Flat scraper - Polishing disc Price does not include VAT.

Stanje: zelo dobro (rabljeno), Obliževalka Hebrock F4 dobro opremljena, možnost ogleda pred nakupom, predrezkarji, leplenje z valjčkom, disponira sistem za iztok lepila, menjalna posoda za lepilo, pnevmatska predgiljotina, drsni valji, zarezalna žaga za končno rezanje robov, rezkalna enota zgoraj-spodaj, R1 – R2 nastavljiva pnevmatsko, profilna ciklina, enota za zaobljenje vogalov nastavljiva pnevmatsko, ravna ciklina, max višina obdelovanca 50 mm, max debelina robnega traku v kolutu 3 mm, pomik 7 m/min, potreba po elektriki 7,4 kW, stroj preizkušen, pripravljen za testiranje, zelo dobro stanje. Obdelanih le 5.000 m Nlodpjxq A Ebefx Agweh Možen nakup preko leasinga.

Stanje: novo, Leto izdelave: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures edge processing in every stage, as it comes equipped with all the components you need for your requirements: pre-milling unit, end trimming saw, milling unit, radius scraper, corner rounding unit, flat scraper, and buffing unit. For even greater flexibility to achieve the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and with adhesive application to the workpiece for edge material up to 3 mm; pre-milling unit (incl. diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change system including glue discharge device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination design), corner rounding unit, radius scraper, flat scraper (including pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change system for corner rounding unit F5/08/5 Additional changeover motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge Nlsdpfx Agolht Hwswsh F5/27. Nesting for milling unit and radius scraper F5/30. Pneumatic 3-point adjustment (for radius, chamfer, flush milling) Location: Ex stock 54634 Bitburg - Available in week 4 -

Stanje: rabljeno, Leto izdelave: 2008, Rabljeni stroj Leto izdelave: 2008 Stanje: Preverjeno delovanje Oprema in tehnični podatki: Lepilni bazen z valjem Krožne škarje Prizna cona Krožna žaga Kombinirani rezkalni agregat Strgalo za površine Podvozje Nsdpoxllvljfx Agwjlh Debelina robnega materiala: 0,5-3 mm Minimalna širina obdelovanca: 90 mm Minimalna debelina obdelovanca: 10 mm Maksimalna debelina obdelovanca: 45 mm Minimalna dolžina obdelovanca: 50 mm Previse robnega materiala zgoraj in spodaj: 2,5 mm Previse robnega materiala spredaj in zadaj: 10 mm Lokacija: Hessen Razpoložljivost: konec novembra/začetek decembra 2025

Stanje: rabljeno, Leto izdelave: 2011, pnevmatska nastavitev rezkarja (ravno/radij) Kombinirana rezkarska postaja R=2 Rezkar zaokroževanja robov R= 2 do 40 mm Spojni rezkar do 40 mm Ravno strgalo Profilno strgalo R = 2 Kratki obdelovanci SPS krmiljenje z zaslonom na dotik Pro Face Gnezdenje Hlajenje/antistatično pršenje - airtronic Zaščitno pršenje roba Riepe z vključenim zamenljivim rezervoarjem Debelina obdelovanca 8 - 60 mm Mehanska pritrditev roba Odvzemna odprtina: 140 mm Dimenzije: Dolžina z izpostavo: 4984 mm Globina z valjčno mizo: 1425 mm Največja višina: 1618 mm Višina delovne mize: 888 mm Teža: 1400 kg Lokacija skladišča: Nattheim Nodpfx Aowmf E Segwslh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 730 h, Edge banding machine Hebrock AKV3005DK-F with jointing, corner copying, and two scraper blades. Very well-maintained machine from a small business in excellent condition. Touch-screen interface with PLC control for easy operation of the machine, with capacity to store 12 user programs. Edge thickness (roll): approx. 0.4 - 3mm Workpiece height: approx. 8 - 53mm Feed speed: approx. 10m/min Noise protection hood Extendable workpiece support, special feature, extendable up to 950mm Extraction connections: 80 + 140mm Units: Quick-change glue pot with glue outlet, two glue pots included in delivery (one used for EVA glue and one for PU glue), the PU glue pot is practically as new, purchased for a single contract. Manual top pressure adjustment with SIKO counter Manual infeed fence adjustment with SIKO counter Manual edge thickness adjustment with SIKO counter Nljdpfxetpn Ets Agwoh Jointing milling with Leitz Whispercut dia-cutters, still sharp Gluing unit with automatic edge feed for rolled material up to 3mm Pressure zone with 4 rollers Cross-cut saw Integrated scrap container for edge remnants Combination milling unit, R2, with pneumatic adjustment between thin and thick edge Corner rounding unit R2, pneumatically adjustable between thin and thick edge The contour milling unit can also be used for shelf boards, i.e., only the straight edge is rounded, not the corners Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Hood locking system CE certification Operating manual A video of the machine in operation can be provided on request. All indexable inserts of the milling units and scrapers have been replaced or rotated, saws have been sharpened. Thus, the machine is immediately ready for use. Only the dia jointing cutters (Whispercut) have not been replaced but are still sharp. Paint defects have been touched up. The Hebrock AKV series is the predecessor of the current K series. The machine has only approx. 730 operating hours (glue pot activated), but the frequency inverters were only activated for approx. 455 hours. The machine is in very good condition, see original photos. Machine dimensions: approx. 5000 x 1400 x 1550mm (LxWxH) Weight: approx. 1550kg. The machine can be inspected on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Stanje: rabljeno, Leto izdelave: 2010, skupna dolžina: 5.250 mm, skupna višina: 1.780 mm, skupna širina: 1.060 mm, Teža: 1.500 kg Cena: Na zahtevo - Letnik: 2010 - Dokumentacija na voljo: Ne - CE oznaka prisotna: Da - Serijska številka: 1969 - Transportne mere: 5250 mm x 1060 mm x 1780 mm (d x š x v) - Transportna teža [kg]: 1.500 kg - Transportni paketi [št.]: 1 Finančne informacije DDV: Navedena cena je brez DDV Nledpowp D Udjfx Agwjh DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vso industrijsko opremo Yorick Diebels

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 650 h, PLC control system (incl. 15” touchscreen), hot-melt adhesive application to the workpiece for edge material up to 3 mm: jointing cutter (incl. DIA tool) up to 3 mm cutting depth, maintenance-free coated glue pot with quick-change preparation and glue drainage device, HF double-motor cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with pneumatic milling adjustment, 2nd HF milling station (approx. 12,000 rpm, incl. pneumatic retraction unit), corner rounding unit(1), radius scraper, flat scraper (incl. pneumatic retraction unit), buffing unit, grooving saw (incl. pneumatic retraction unit), robust chain feed, ball-bearing dual pressure rollers, unit sight window on both operator and rear side, signal lamp for workpiece sequence, extendable workpiece support, feed speed up to approx. 15 m/min, edge banding for workpieces up to 60 mm thickness. Additionally, the machine is equipped with: Nljdpfxexn Nvbs Agwoh - Quick-change unit for corner rounding - Multi-radius scraper (R1/R2) - Heated infeed fence - Chassis - Separator spray unit (panel spraying) - Cleaning agent spray unit (panel spraying) - Edge protection spray - Nesting function - Pneumatic 3-point adjustment - Multitool for HF milling station - Airtronic (for workpieces up to 40 mm thickness) - Axis package (motorized adjustment for panel thickness, edge thickness & jointing cutter depth) - Glue pot extraction hood In stock in Poland

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with all the features you need to achieve perfect edges right from the start: diamond-tipped jointing cutters ensure that workpieces are excellently prepared for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Nodsi Am U Depfx Agwjlh Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change reservoir system including glue drainage device, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination version), robust chain feed, ball bearing mounted double roller top pressure, inspection window from the rear of the machine, extendable workpiece support, feed approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling)

Stanje: rabljeno, Kompaktni robni lepilni stroj Hebrock EURO 3001 za natančno robljenje plošč z robnimi trakovi. Stroj omogoča čisto obdelavo robov z avtomatskim nanosom lepila, pritisnimi valji in naknadnimi obdelovalnimi enotami. Idealno za pohištveno in notranjo opremo. Nlodpsxdc D Rjfx Agwoh Tehnični podatki so informativni. Agregat 1: Nanašanje lepila Agregat 2: Obrezovanje Agregat 3: Poravnava z rezkanjem Višina obdelovanca: pribl. 10 – 40 mm Debelina roba: maks. pribl. 12 mm Podajalna hitrost: pribl. 10 m/min

Stanje: rabljeno, Leto izdelave: 2007, Frez za spojitev, 1. frezalna postaja R=2,5, kombinirani agregat, frez za zaokroževanje vogalov R=2, vlečno rezilo za površine, vlečno rezilo za profile, pnevmatska nastavitev frezanja (ravno / radij), SPS krmiljenje z zaslonom na dotik Pro-face, menjalne posode, priprava. Posebnost: maksimalna debelina obdelovanca 60 mm (brez spajanja). Lokacija zaloge: pri dobavitelju. Nljdpfxexnlacj Agwjh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Edge banding machine Hebrock F 4 with jointing, corner rounding, and two scraper blades. Very well-maintained machine from a small workshop in excellent condition. Color touch-screen interface with PLC control for easy machine operation; up to 10 operating programs can be stored. Edge thickness (roll): approx. 0.4–2 mm Workpiece height: approx. 10–40 mm Feed speed: approx. 7 m/min Sound-insulating hood Extendable workpiece support Extraction port: 1 x 140 mm Units: Top pressure with manual adjustment, SIKO counter Infeed fence with manual adjustment, SIKO counter Edge thickness manual adjustment, SIKO counter Jointing cutter with diamond-tipped cutters, cutters resharpened Gluing station with automatic edge feed for roll material up to 2 mm Gluepot with glue change device for quick color changes Pressure zone with 3 rollers End trim saw Combined milling unit R2 with pneumatic adjustment between thin and thick edges Radius scraper R2, pneumatically retractable Corner rounding unit R2, pneumatic adjustment between thin and thick edge The profile trimmer can also be used in shelf mode, i.e. only the straight edge is rounded, not the corners Glue joint scraper, pneumatically retractable Hood locking CE mark Operating manual A video of the running machine can be sent on request. All indexable inserts of the milling and scraper units have been replaced or rotated, saws resharpened. The machine is immediately ready for use. The diamond jointing cutters have also been resharpened. Paintwork blemishes have been touched up. Njdpfx Aow Sn I Eegwelh The machine has approx. 335 hours of operation and only processed approx. 20,700 linear meters of edge. The machine is in very good condition, see original photos. Machine dimensions approx. 4050 x 1100 x 1400 mm (LxWxH) Weight approx. 800 kg. The machine can be inspected and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration at our warehouse, see "other offers from this supplier."

Stanje: dober (rabljeno), Leto izdelave: 2025, • Additional interchangeable glue pot • PLC control (including touchscreen) • Application of hot-melt adhesive to the workpiece up to 3 mm jointing cutter • Jointing cutter (including DIA tool) up to 2 mm cutting depth • Glue pot, maintenance-free with preparation for interchangeable pot including glue discharge device • HF cross-cut saw station (approx. 12,000 rpm) • HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutters (combined version) • Corner rounding unit • Surface scraper (including pneumatic lift) • Free space (for cleaning unit or radius scraper) • Robust chain drive • Ball-bearing double pressure rollers Njdpsxgfpzofx Agwjlh • Viewing window from the rear of the machine • Extendable workpiece support • Feed rate approx. 10 m/min • Hebrock radius scraper F4/09 (including pneumatic lift) • Hebrock pneumatic 3-point adjustment (radius, chamfer, flush milling) Available from: immediately Delivery terms: ex site – EXW Berlin Payment terms: payment before collection Accessories without guarantee. The following applies: “Item sold as seen.” The buyer must check the completeness of the object on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10/3201, Ponujam dobro ohranjen SBM 10 proizvajalca Hebrock. Prava redkost. Stroj za nanašanje talilnega lepila za oblaganje običajnih materialov za robove in učinkovito nadaljnjo uporabo odpadkov furnirskih trakov. Nodpfxsxmbkhe Agwslh

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Nsdpslht Hzofx Agwelh Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: F2 - 10 m/min feed speed F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Stanje: zelo dobro (rabljeno), Hebrock 3003 Edge Banding Machine Well equipped, possibility to inspect before purchase PRE-MILLING cutters Zero Joint AirTronic system – glueless hot air technology Nlsdpfxswmc I Do Agwoh Glue application by roller Pneumatic pre-cut guillotine Pressure rollers Anti-adhesive fluids End-trimming saw Top and bottom milling unit, radius R1 – R2 adjustable pneumatically Corner rounding unit adjustable pneumatically Flat scraper Max workpiece height: 50mm Max edge thickness in roll: 3mm Feed speed: 10 m/min Power requirement: 15.8 kW Condition: Very good, fully functional

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Nedpfjl D Rp Eex Agwslh Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: novo, Leto izdelave: 2024, IN STOCK!!!! Max. edge thickness 3 mm Min/Max. workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 10 m/min Ready for operation a pprox. 3.5 min. Max. power consumption approx. 7.4 kW Electrical connection 400 V – 3 Ph – 50 Hz Working table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Extraction nozzle Ø 1 x 140 mm Nodpfxeglfwts Agwolh Edgebander with PLC control Jointing unit (incl. DIA-tool) up to 2 mm milling depth Combination milling head Radius milling R=2 mm Radius corner milling R=2 mm Radius scraper blade R=2 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Hebrock dry box for edge banding machine Year: 2020 Excellent condition – like new Location: available from stock in 54634 Bitburg Njdowqx Emepfx Agwjlh - immediately available -

Stanje: novo, Leto izdelave: 2024, IN STOCK!!! Max. edge thickness: 3 mm Min./Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ready for operation: approx. 3.5 min Weight: approx. 900 kg Max. power consumption: Ø approx. 7.4 kW Extraction port: Ø 1 x 140 mm Electrical connection: 400 V - 3 Ph - 50 Hz Nljdjhymgdopfx Agweh Working table height: approx. 900 mm Feed speed: approx. 10 m/min Machine dimensions: approx. 4,300 x 1,300 x 1,400 mm (LxWxH) Combination milling head Radius cutter R=2 mm Radius corner cutter R=2 mm Radius scraper blade R=2 mm

Stanje: novo, Leto izdelave: 2025, Hebrock F 4 For Complete Processing of Your Panels For those who don't want to do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges within just 4 meters of machine length. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Nodehqadcopfx Agwelh Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. total power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm SPS control with 10" touchscreen Top-mounted quick-heating glue pot (maintenance free) Support plate for edge material Automatic central lubrication (for crosscut saw, corner rounding unit) Optical workpiece sequence indicator Support arm (extendable to the front) Pre-equipment for glue pot change incl. PUR glue change system Flat surface scraper with dual tracing Pneumatic roller end trimming (scissor-cut design, Hebrock system) Double roller top pressure (ball bearing mounted) Transport chain with fixed special chain plates Pre-milling unit Milling unit Crosscut saw Corner rounding unit Accessories: F4/09 radius scraper (incl. pneumatic lift) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: Ex stock 54634 Bitburg - available at short notice -

Stanje: novo, Leto izdelave: 2025, The Hebrock K 36 – top specification with motorized adjustment – showroom model – as-new machine – – immediately available – This perennial favorite from Hebrock offers unprecedented possibilities. Designed for the highest demands, the K 36 stands for absolute reliability and productivity in daily operation. The option to equip the machine with a profile cutter and a multi-radius scraper sets new standards in perfect edge processing for various edge thicknesses. Nledpfxei Am Uko Agwjh Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Technical Data: Max. edge thickness: 3 mm Min./max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power input: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1750 kg Features: Hebrock K 36 – 15 m/min Edge banding machine K36 With PLC control (incl. 15" touchscreen), hot-melt adhesive application onto the workpiece for edge material up to 3 mm; joint trimming unit (incl. carbide-tipped tool) up to 3 mm trimming depth, maintenance-free, coated glue pot with quick-change system incl. glue discharge device, HF double-motor end trimming station (approx. 12,000 rpm), HF trimming station (approx. 12,000 rpm) with pneumatic adjustment and interchangeable cutter head (combi design), corner rounding unit, radius scraper, flat scraper (incl. pneumatic lift-up device), buffing station, robust chain feed, ball-bearing mounted double pressure rollers, aggregate inspection windows on both the rear and operator sides, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, banding up to 60 mm workpiece thickness. Equipment Options: 36/08/1 Quick-change corner rounding unit 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 36/09/1 Multi-radius scraper 36/24/1 Separator spraying device 36/24/2 Cleaning agent spraying device 36/25 Edge protection spraying 36/27 Nesting (1x trimming station + 1x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF trimming station (R2/R1 /chamfer) 36/45 Axis package for motorized panel/edge thickness and joint trimming depth adjustment Location: ex-stock 54634 Bitburg – immediately available –

Stanje: novo, Leto izdelave: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding woodworking operations. The F 5 guarantees edge processing at every stage, as it comes equipped with all the components you need to meet your requirements: jointing cutter, cross-cut saw, milling unit, radius scraper blade, corner rounding unit, flat scraper blade, and buffing station. For even greater flexibility in achieving a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Nledei Anadopfx Agweh Hebrock F5 Next - 10 m/min F5 Next Edgebander With PLC control (including touchscreen) and hot-melt glue application directly to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tooling) for up to 2 mm cutting depth, maintenance-free glue pot with quick-change feature including glue drain, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combi version), corner rounding unit, radius scraper blade, flat scraper blade (including pneumatic lift), buffing station, robust chain feed, double roller top pressure with ball bearings, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change device for corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tooling F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Edge spray unit F5/27. Nesting for milling and radius scraper blade F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: Ex stock 54634 Bitburg Available in calendar week: 4/2024