Hebrock Euro 1000 nakup rabljenega (53)

Stanje: rabljeno, Kompaktni robni lepilni stroj Hebrock EURO 3001 za natančno robljenje plošč z robnimi trakovi. Stroj omogoča čisto obdelavo robov z avtomatskim nanosom lepila, pritisnimi valji in naknadnimi obdelovalnimi enotami. Idealno za pohištveno in notranjo opremo. Tehnični podatki so informativni. Agregat 1: Nanašanje lepila Agregat 2: Obrezovanje Agregat 3: Poravnava z rezkanjem Višina obdelovanca: pribl. 10 – 40 mm Debelina roba: maks. pribl. 12 mm Podajalna hitrost: pribl. 10 m/min Dcjdpexdc D Rsfx Adhjn

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 585, Blagovna znamka: Hebrock Model: AKV 1000 V Št. stroja: 585 Dcedpfoib H Slsx Adhsn Letnik izdelave: 1995 Tehnični podatki: Maksimalna debelina robnega traku: 3 mm Maksimalna višina robnega traku: 50 mm Maksimalna podajalna hitrost: 7,5 m/min S čelilnim nožem Dolžina delovne mize: 2200 mm Motor: 7 kW, 50 Hz, 230/400V, 3-fazni Transportne dimenzije: Dolžina: 220 cm Širina: 115 cm Višina: 150 cm Inventarna številka: 2001164BXM

Stanje: rabljeno, Leto izdelave: 2008, Rabljeni stroj Dcodpfx Adjxllvlohsn Leto izdelave: 2008 Stanje: Preverjeno delovanje Oprema in tehnični podatki: Lepilni bazen z valjem Krožne škarje Prizna cona Krožna žaga Kombinirani rezkalni agregat Strgalo za površine Podvozje Debelina robnega materiala: 0,5-3 mm Minimalna širina obdelovanca: 90 mm Minimalna debelina obdelovanca: 10 mm Maksimalna debelina obdelovanca: 45 mm Minimalna dolžina obdelovanca: 50 mm Previse robnega materiala zgoraj in spodaj: 2,5 mm Previse robnega materiala spredaj in zadaj: 10 mm Lokacija: Hessen Razpoložljivost: konec novembra/začetek decembra 2025

Stanje: rabljeno, Leto izdelave: 2018, Edge Banding Machine AKV 3006 DK-F with Jointing Cutter Unit including DIA Tools - Jointing thickness up to 40 mm - Workpiece thickness up to 3 mm - Combination milling station Radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edge materials up to 3 mm - Workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable knives (combination design) and fine adjustment of the cutter from the operator side - Provision for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double roller top pressure beam - Aggregate viewing window from the rear and operator side of machine - PLC control including touchscreen Dedoxfh Tmjpfx Adhjcn Technical Data: - Feed speed: 10 m / min - Panel thickness: 8 - 40 mm - Weight: depending on configuration approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment (1 pc) Switchable radius/chamfer for combination milling stations. Switching between chamfer or flush is manual by repositioning the stop flap inside the machine. Buffing unit (polishing mop): 1 pc Corner rounding cutter: 1 pc, incl. combination tool and pneumatic radius/chamfer adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper: 1 pc, incl. pneumatic retraction device, radius R 2.0 mm Flat scraper: 1 pc with pneumatic control Glue station quick-change system including second glue pot and downward glue discharge (1 pc) for rapid color change Horizontal grooving saw unit into the edge: 1 pc, incl. pneumatic retraction and groove tool Separate extraction for jointing unit: 1 pc, direct connection on the jointing unit, vertical above, d = 80 mm for optimal extraction performance; strongly recommended from model AKV 3005 DK-F Ball bearing for corner rounding cutter, 24.1 mm: 1 pc Ball bearing for corner rounding cutter, 24.2 mm: 1 pc Replacement motor 0.37 kW for corner rounding cutter, with quick-change system including radius cutter R 1 Replacement spindles, 1 set = 2 pcs 1 set quick-change motors for longitudinal machining, top and bottom, including tool R 1 Compressed air requirement: 100 – 150 l/hr Location: Nattheim

Stanje: rabljeno, Hebrock K34 SPS screen control with 15" touchscreen Pre-milling unit for processing before the gluing section (3 mm) Glue pot with interchangeable tank and glue discharge device Maximum edge height: 60 mm End trimming unit Flush milling unit for straight, radius, and chamfer milling Corner rounding unit for radii and chamfers Multi-radius scraper (R1/R2) Nesting Flat scraper Release agent spraying unit Dcodpfswtfvkox Adhsn Year of manufacture: 2023, 52 operating hours Machine is AS NEW and in TOP CONDITION From workshop closure / retirement Directly from the joinery

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Edge banding machine Hebrock F 4 with jointing, corner rounding, and two scraper blades. Very well-maintained machine from a small workshop in excellent condition. Color touch-screen interface with PLC control for easy machine operation; up to 10 operating programs can be stored. Edge thickness (roll): approx. 0.4–2 mm Workpiece height: approx. 10–40 mm Feed speed: approx. 7 m/min Sound-insulating hood Dcedpfxow Sn I Eo Adhon Extendable workpiece support Extraction port: 1 x 140 mm Units: Top pressure with manual adjustment, SIKO counter Infeed fence with manual adjustment, SIKO counter Edge thickness manual adjustment, SIKO counter Jointing cutter with diamond-tipped cutters, cutters resharpened Gluing station with automatic edge feed for roll material up to 2 mm Gluepot with glue change device for quick color changes Pressure zone with 3 rollers End trim saw Combined milling unit R2 with pneumatic adjustment between thin and thick edges Radius scraper R2, pneumatically retractable Corner rounding unit R2, pneumatic adjustment between thin and thick edge The profile trimmer can also be used in shelf mode, i.e. only the straight edge is rounded, not the corners Glue joint scraper, pneumatically retractable Hood locking CE mark Operating manual A video of the running machine can be sent on request. All indexable inserts of the milling and scraper units have been replaced or rotated, saws resharpened. The machine is immediately ready for use. The diamond jointing cutters have also been resharpened. Paintwork blemishes have been touched up. The machine has approx. 335 hours of operation and only processed approx. 20,700 linear meters of edge. The machine is in very good condition, see original photos. Machine dimensions approx. 4050 x 1100 x 1400 mm (LxWxH) Weight approx. 800 kg. The machine can be inspected and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration at our warehouse, see "other offers from this supplier."

Stanje: dober (rabljeno), Leto izdelave: 2025, • Additional interchangeable glue pot • PLC control (including touchscreen) • Application of hot-melt adhesive to the workpiece up to 3 mm jointing cutter • Jointing cutter (including DIA tool) up to 2 mm cutting depth • Glue pot, maintenance-free with preparation for interchangeable pot including glue discharge device • HF cross-cut saw station (approx. 12,000 rpm) • HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutters (combined version) • Corner rounding unit • Surface scraper (including pneumatic lift) • Free space (for cleaning unit or radius scraper) • Robust chain drive • Ball-bearing double pressure rollers • Viewing window from the rear of the machine Dodpfx Asxgfpzsdhjcn • Extendable workpiece support • Feed rate approx. 10 m/min • Hebrock radius scraper F4/09 (including pneumatic lift) • Hebrock pneumatic 3-point adjustment (radius, chamfer, flush milling) Available from: immediately Delivery terms: ex site – EXW Berlin Payment terms: payment before collection Accessories without guarantee. The following applies: “Item sold as seen.” The buyer must check the completeness of the object on site.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Hebrock dry box for edge banding machine Year: 2020 Excellent condition – like new Dodpfx Aewqx Emedhecn Location: available from stock in 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2024, Obrobni stroj za lepljenje robov F4 Popolnoma nov stroj Leto izdelave: 2024 Stroj za lepljenje robov z PLC krmilnim sistemom (vključen zaslon na dotik) in sistemom za nanašanje lepila za robne materiale do debeline 3 mm: Enota za predrezanje (z diamantnim orodjem) za plošče do debeline 2 mm Posoda za lepilo s hitrim segrevanjem in premazano notranjostjo, ki ne potrebuje vzdrževanja Pripravljeno za zamenljive posode za lepilo (vključen sistem za hitro zamenjavo vročega lepila) Visokofrekvenčna postaja za obrezovanje koncev (~12.000 vrt/min) Visokofrekvenčna rezkalna postaja (~12.000 vrt/min) z neodvisno pnevmatsko nastavitvijo in reverzno žago za panele (kombinirana izvedba) Robustna dovajalna veriga Dodoxf H Snopfx Adhecn Zgornja pritrdilna enota z dvojnimi valji (na krogličnih ležajih) Zadnje okno za boljšo vidljivost Podaljšljiva prednja podpora Hitrost podajanja približno 10 m/min OPCIJE NA ZALOGI: Sistem za hitro menjavo kotne rezkalne enote (F4/08/4) Nesting enota (za rezkalne in radijske strgala) (F4/27) Pnevmatska nastavitev v treh točkah (ravni, poševni, radialni rez) (F4/30) Notranja LED osvetlitev (F4/32)

Stanje: rabljeno, Leto izdelave: 2011, pnevmatska nastavitev rezkarja (ravno/radij) Kombinirana rezkarska postaja R=2 Rezkar zaokroževanja robov R= 2 do 40 mm Spojni rezkar do 40 mm Ravno strgalo Profilno strgalo R = 2 Kratki obdelovanci SPS krmiljenje z zaslonom na dotik Pro Face Gnezdenje Hlajenje/antistatično pršenje - airtronic Zaščitno pršenje roba Riepe z vključenim zamenljivim rezervoarjem Debelina obdelovanca 8 - 60 mm Mehanska pritrditev roba Odvzemna odprtina: 140 mm Dimenzije: Dolžina z izpostavo: 4984 mm Globina z valjčno mizo: 1425 mm Največja višina: 1618 mm Višina delovne mize: 888 mm Teža: 1400 kg Lokacija skladišča: Nattheim Dsdpfswmf E Sox Adhjcn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Gre za stroj Hebrock 3006 DK-F, ki je skupno obratoval 68 km lepljenja traku. Večina cevi za dovod zraka je bila zamenjana. Skupaj s strojem je priložen 1 komplet dodatnih predrezkarjev, nabrusenih in pripravljenih za uporabo. Model: AKV 3006 DK-F Št. stroja: 1277 Napetost: 400 V Frekvenca: 50 Hz Dedsxiv R Uepfx Adhocn Tok: 29,7 A Moč: 12,3 kW Leto izdelave: 2007 Proizvajalec: Maschinenbau Hebrock GmbH, Bünde, Nemčija Opis: Stroj je opremljen z: - Enoto za predhodno obdelavo (premilling) - Enoto za rezanje robov - Brusilno enoto - Enoto za zaobljanje robov - Enoto za brizganje antistatične in hladilne tekočine - Enoto za lepljenje s hitro zamenjavo posode za lepilo - Kontrolnim zaslonom za enostavno nastavljanje parametrov Stanje: Odlično, popolnoma funkcionalen in vzdrževan.

Stanje: zelo dobro (rabljeno), Hebrock 3003 Edge Banding Machine Well equipped, possibility to inspect before purchase PRE-MILLING cutters Dcodpfx Ajwmc I Djdhsn Zero Joint AirTronic system – glueless hot air technology Glue application by roller Pneumatic pre-cut guillotine Pressure rollers Anti-adhesive fluids End-trimming saw Top and bottom milling unit, radius R1 – R2 adjustable pneumatically Corner rounding unit adjustable pneumatically Flat scraper Max workpiece height: 50mm Max edge thickness in roll: 3mm Feed speed: 10 m/min Power requirement: 15.8 kW Condition: Very good, fully functional

Stanje: zelo dobro (rabljeno), Edge banding machine HEBROCK F5 -used- PC control with monitor, touchscreen, swiveling control panel, program memory, manually self-clamping pressure bridge adjustment, feed by transport chain, extendable workpiece support, diamond jointing cutters with synchronous and counter-rotation, fast-heating glue pot, quick-change device for glue pots, PUR adhesives can be used, cut-off saw with HF motor, flush and radius trimming unit, pneumatic switching for the milling unit, milling tools with carbide indexable inserts, corner copying unit, multi-radius scraper (R2/R1), chip collection box for radius scraper, air nozzle at the radius scraper, application-based surface scraper, air nozzle at the surface scraper, spray unit for release agent after pressure unit, spray unit for separating agent, spray unit for cleaning agent, buffing unit, additional exchange motor for corner milling, additional exchangeable glue pot, year of manufacture: 2024 ----- Technical Data ----- Edge thickness (roll material): 3 mm, workpiece thickness: 50 mm, feed speed: 7/10 m/min., distance to workpiece support: 420 mm, support plate diameter for edge material: 800 mm, screen size: 15 inches, power jointing cutter: 2 x 1.1 kW, power cut-off saw: 0.28 kW, power milling station: 2 x 0.28 kW, power corner copy: 0.28 kW, power buffing: 0.18 kW, compressed air connection: 7 bar, total length: 4,300 mm, dimensions (LxWxH): 4,300 x 1,200 x 1,470 mm Dcedpfx Ajw Rpfcodhen Quality info: - All settings checked - Complete basic inspection - Complete basic cleaning - electrics checked - pneumatics checked - immediately ready for operation

Stanje: novo, Leto izdelave: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures edge processing in every stage, as it comes equipped with all the components you need for your requirements: pre-milling unit, end trimming saw, milling unit, radius scraper, corner rounding unit, flat scraper, and buffing unit. For even greater flexibility to achieve the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Dodpfx Aolht Hwjdhocn Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and with adhesive application to the workpiece for edge material up to 3 mm; pre-milling unit (incl. diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change system including glue discharge device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination design), corner rounding unit, radius scraper, flat scraper (including pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change system for corner rounding unit F5/08/5 Additional changeover motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge F5/27. Nesting for milling unit and radius scraper F5/30. Pneumatic 3-point adjustment (for radius, chamfer, flush milling) Location: Ex stock 54634 Bitburg - Available in week 4 -

Stanje: rabljeno, Leto izdelave: 2010, skupna dolžina: 5.250 mm, skupna višina: 1.780 mm, skupna širina: 1.060 mm, Teža: 1.500 kg Cena: Na zahtevo - Leto izdelave: 2010 - Dokumentacija na voljo: Ne - CE označba prisotna: Da - Serijska številka: 1969 Dedpfx Aswp D Udedhecn - Transportne mere: 5250mm x 1060mm x 1780mm (d x š x v) - Transportna teža [kg]: 1500kg - Število transportnih paketov [kos]: 1 Finančne informacije DDV: Naveden cena je brez DDV DDV/diferencirana obdavčitev: DDV je odbitna za poslovne uporabnike Dostava in možnost odkupa so možni kadarkoli za vse iz industrijskega področja. Glenn Smeets

Stanje: novo, Leto izdelave: 2024, IN STOCK!!!! Max. edge thickness 3 mm Dodpfx Adjglfwtshecn Min/Max. workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 10 m/min Ready for operation a pprox. 3.5 min. Max. power consumption approx. 7.4 kW Electrical connection 400 V – 3 Ph – 50 Hz Working table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Extraction nozzle Ø 1 x 140 mm Edgebander with PLC control Jointing unit (incl. DIA-tool) up to 2 mm milling depth Combination milling head Radius milling R=2 mm Radius corner milling R=2 mm Radius scraper blade R=2 mm

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Dsdpfel D Rp Eox Adhjcn Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: Dcsdpjlht Hzsfx Adhjn F2 - 10 m/min feed speed F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Stanje: novo, Leto izdelave: 2024, IN STOCK!!! Max. edge thickness: 3 mm Min./Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ready for operation: approx. 3.5 min Dcodshymgdepfx Adhen Weight: approx. 900 kg Max. power consumption: Ø approx. 7.4 kW Extraction port: Ø 1 x 140 mm Electrical connection: 400 V - 3 Ph - 50 Hz Working table height: approx. 900 mm Feed speed: approx. 10 m/min Machine dimensions: approx. 4,300 x 1,300 x 1,400 mm (LxWxH) Combination milling head Radius cutter R=2 mm Radius corner cutter R=2 mm Radius scraper blade R=2 mm

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 Dcodpfx Adji Am U Djhsn The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with all the features you need to achieve perfect edges right from the start: diamond-tipped jointing cutters ensure that workpieces are excellently prepared for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change reservoir system including glue drainage device, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination version), robust chain feed, ball bearing mounted double roller top pressure, inspection window from the rear of the machine, extendable workpiece support, feed approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling)

Stanje: novo, Leto izdelave: 2024, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointer head Dedpfx Adsg Tu Rkjhocn Corner rounding unit (radius R = 2 mm) Quick-change device for corner rounding unit Corner rounding change motor (radius EF R = 1 mm) Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spraying Nesting function Pneumatic 3-point adjustment Multi-function milling cutter (R2/R1/chamfer) Equipment for short workpieces

Stanje: novo, Leto izdelave: 2025, Hebrock F 4 For Complete Processing of Your Panels For those who don't want to do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges within just 4 meters of machine length. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. total power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm SPS control with 10" touchscreen Top-mounted quick-heating glue pot (maintenance free) Support plate for edge material Automatic central lubrication (for crosscut saw, corner rounding unit) Optical workpiece sequence indicator Support arm (extendable to the front) Pre-equipment for glue pot change incl. PUR glue change system Flat surface scraper with dual tracing Pneumatic roller end trimming (scissor-cut design, Hebrock system) Double roller top pressure (ball bearing mounted) Transport chain with fixed special chain plates Pre-milling unit Dedpfx Aohqadcjdhjcn Milling unit Crosscut saw Corner rounding unit Accessories: F4/09 radius scraper (incl. pneumatic lift) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: Ex stock 54634 Bitburg - available at short notice -

Stanje: novo, Leto izdelave: 2025, Your entry into edge banding could not be better, as the 3.3 m long F 2 is not only cost-effective and space-saving. It also comes with all the features you need to achieve perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edge application. The equipment includes a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, end trimming saw, and combination cutter. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 10 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 5.9 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: approx. 3350 x 1300 x 1400 mm (LxWxH) Working table height: approx. 900 mm Weight: approx. 620 kg Extraction nozzle: Ø 1 x 140 mm Dcedsglfw Njpfx Adhsn Flat pull scraper

Stanje: novo, Leto izdelave: 2025, The Hebrock K 36 – top specification with motorized adjustment – showroom model – as-new machine – – immediately available – This perennial favorite from Hebrock offers unprecedented possibilities. Designed for the highest demands, the K 36 stands for absolute reliability and productivity in daily operation. The option to equip the machine with a profile cutter and a multi-radius scraper sets new standards in perfect edge processing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Technical Data: Max. edge thickness: 3 mm Min./max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Dedpfx Adji Am Ukjhscn Ready for operation: approx. 6 min Max. power input: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1750 kg Features: Hebrock K 36 – 15 m/min Edge banding machine K36 With PLC control (incl. 15" touchscreen), hot-melt adhesive application onto the workpiece for edge material up to 3 mm; joint trimming unit (incl. carbide-tipped tool) up to 3 mm trimming depth, maintenance-free, coated glue pot with quick-change system incl. glue discharge device, HF double-motor end trimming station (approx. 12,000 rpm), HF trimming station (approx. 12,000 rpm) with pneumatic adjustment and interchangeable cutter head (combi design), corner rounding unit, radius scraper, flat scraper (incl. pneumatic lift-up device), buffing station, robust chain feed, ball-bearing mounted double pressure rollers, aggregate inspection windows on both the rear and operator sides, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, banding up to 60 mm workpiece thickness. Equipment Options: 36/08/1 Quick-change corner rounding unit 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 36/09/1 Multi-radius scraper 36/24/1 Separator spraying device 36/24/2 Cleaning agent spraying device 36/25 Edge protection spraying 36/27 Nesting (1x trimming station + 1x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF trimming station (R2/R1 /chamfer) 36/45 Axis package for motorized panel/edge thickness and joint trimming depth adjustment Location: ex-stock 54634 Bitburg – immediately available –

Stanje: novo, Leto izdelave: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding woodworking operations. The F 5 guarantees edge processing at every stage, as it comes equipped with all the components you need to meet your requirements: jointing cutter, cross-cut saw, milling unit, radius scraper blade, corner rounding unit, flat scraper blade, and buffing station. For even greater flexibility in achieving a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Dedpfx Adji Anadohecn Hebrock F5 Next - 10 m/min F5 Next Edgebander With PLC control (including touchscreen) and hot-melt glue application directly to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tooling) for up to 2 mm cutting depth, maintenance-free glue pot with quick-change feature including glue drain, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combi version), corner rounding unit, radius scraper blade, flat scraper blade (including pneumatic lift), buffing station, robust chain feed, double roller top pressure with ball bearings, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change device for corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tooling F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Edge spray unit F5/27. Nesting for milling and radius scraper blade F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: Ex stock 54634 Bitburg Available in calendar week: 4/2024