Hebrock Akv 3003 Dkf nakup rabljenega (56)

Stanje: zelo dobro (rabljeno), Hebrock 3003 Edge Banding Machine Iodpfx Aewmc I Dsh Dsih Well equipped, possibility to inspect before purchase PRE-MILLING cutters Zero Joint AirTronic system – glueless hot air technology Glue application by roller Pneumatic pre-cut guillotine Pressure rollers Anti-adhesive fluids End-trimming saw Top and bottom milling unit, radius R1 – R2 adjustable pneumatically Corner rounding unit adjustable pneumatically Flat scraper Max workpiece height: 50mm Max edge thickness in roll: 3mm Feed speed: 10 m/min Power requirement: 15.8 kW Condition: Very good, fully functional

Stanje: rabljeno, Leto izdelave: 2007, Rabljeni stroj GM020.0068 AKV 3003 DK - F Leto izdelave: 2007 Ijdpfx Asw Nih Ioh Djih Izvedba: 3 mm 1. rezkalna postaja: Kombinirana Površinski vlečni strgalnik z izkopom Podvozje Pnevmatska nastavitev rezkanja Ročica končnega stikala, naklon 7,5°

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Edge banding machine with jointing cutter (incl. DIA tool), with PLC control (incl. touchscreen), with hot-melt glue application to the workpiece for edge material up to 3 mm: maintenance-free, coated glue pot with quick-change glue pot preparation, high-frequency (HF) end trimming unit (approx. 16,000 rpm) for front and rear edge overhang, HF milling station (approx. 16,000 rpm) with replaceable insert cutter (combination version), fine milling adjustment from operator side (Hebrock system), corner rounding unit (minimum workpiece length 300 mm, maximum workpiece thickness 40 mm), surface scraper incl. pneumatic lifting, robust chain feed, double roller top pressure, aggregate viewing windows from the machine rear and operator side, extendable workpiece support, feed rate approx. 10 m/min., 60 mm workpiece thickness, incl. 1x spare glue pot, incl. chassis. Iodpfxjl H E H Hs Ah Deih

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 730 h, Edge banding machine Hebrock AKV3005DK-F with jointing, corner copying, and two scraper blades. Very well-maintained machine from a small business in excellent condition. Touch-screen interface with PLC control for easy operation of the machine, with capacity to store 12 user programs. Edge thickness (roll): approx. 0.4 - 3mm Workpiece height: approx. 8 - 53mm Feed speed: approx. 10m/min Noise protection hood Extendable workpiece support, special feature, extendable up to 950mm Extraction connections: 80 + 140mm Units: Quick-change glue pot with glue outlet, two glue pots included in delivery (one used for EVA glue and one for PU glue), the PU glue pot is practically as new, purchased for a single contract. Manual top pressure adjustment with SIKO counter Manual infeed fence adjustment with SIKO counter Manual edge thickness adjustment with SIKO counter Jointing milling with Leitz Whispercut dia-cutters, still sharp Gluing unit with automatic edge feed for rolled material up to 3mm Pressure zone with 4 rollers Cross-cut saw Integrated scrap container for edge remnants Combination milling unit, R2, with pneumatic adjustment between thin and thick edge Corner rounding unit R2, pneumatically adjustable between thin and thick edge The contour milling unit can also be used for shelf boards, i.e., only the straight edge is rounded, not the corners Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Hood locking system CE certification Operating manual A video of the machine in operation can be provided on request. All indexable inserts of the milling units and scrapers have been replaced or rotated, saws have been sharpened. Thus, the machine is immediately ready for use. Only the dia jointing cutters (Whispercut) have not been replaced but are still sharp. Paint defects have been touched up. The Hebrock AKV series is the predecessor of the current K series. The machine has only approx. 730 operating hours (glue pot activated), but the frequency inverters were only activated for approx. 455 hours. The machine is in very good condition, see original photos. Machine dimensions: approx. 5000 x 1400 x 1550mm (LxWxH) Iiedpstpn Etefx Ah Djh Weight: approx. 1550kg. The machine can be inspected on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Stanje: rabljeno, Leto izdelave: 2007, Frez za spojitev, 1. frezalna postaja R=2,5, kombinirani agregat, frez za zaokroževanje vogalov R=2, vlečno rezilo za površine, vlečno rezilo za profile, pnevmatska nastavitev frezanja (ravno / radij), SPS krmiljenje z zaslonom na dotik Pro-face, menjalne posode, priprava. Posebnost: maksimalna debelina obdelovanca 60 mm (brez spajanja). Lokacija zaloge: pri dobavitelju. Ijdpfx Ahjxnlaco Dsih

Stanje: rabljeno, Leto izdelave: 2010, skupna dolžina: 5.250 mm, skupna višina: 1.780 mm, skupna širina: 1.060 mm, Teža: 1.500 kg Cena: Na zahtevo - Letnik: 2010 - Dokumentacija na voljo: Ne - CE oznaka prisotna: Da - Serijska številka: 1969 - Transportne mere: 5250 mm x 1060 mm x 1780 mm (d x š x v) - Transportna teža [kg]: 1.500 kg - Transportni paketi [št.]: 1 Finančne informacije DDV: Navedena cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Iijdpfx Aswp D Udeh Deh Dostava in odkup možna kadarkoli za vso industrijsko opremo Yorick Diebels

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Gre za stroj Hebrock 3006 DK-F, ki je skupno obratoval 68 km lepljenja traku. Večina cevi za dovod zraka je bila zamenjana. Skupaj s strojem je priložen 1 komplet dodatnih predrezkarjev, nabrusenih in pripravljenih za uporabo. Model: AKV 3006 DK-F Št. stroja: 1277 Napetost: 400 V Frekvenca: 50 Hz Tok: 29,7 A Moč: 12,3 kW Leto izdelave: 2007 Iijdpfjxiv R Uox Ah Dsh Proizvajalec: Maschinenbau Hebrock GmbH, Bünde, Nemčija Opis: Stroj je opremljen z: - Enoto za predhodno obdelavo (premilling) - Enoto za rezanje robov - Brusilno enoto - Enoto za zaobljanje robov - Enoto za brizganje antistatične in hladilne tekočine - Enoto za lepljenje s hitro zamenjavo posode za lepilo - Kontrolnim zaslonom za enostavno nastavljanje parametrov Stanje: Odlično, popolnoma funkcionalen in vzdrževan.

Stanje: rabljeno, Leto izdelave: 2018, Rabljeni stroj GM020.0050 AKV 3005 DK - F Letnik izdelave: 2018 Izvedba: 8 mm 1. rezkalna postaja: Kombi pnevmatska 3-točkovna nastavitev Postaja za čiščenje Rezkar za zaobljene vogale Postaja za vlečne rezila s polmerom vklj. dvig Iiodpfxew Nif Hs Ah Djh Ploščato vlečno rezilo SPS krmiljenje z zaslonom na dotik Zamenljiva posoda Nesting Iztek lepila Debelina obdelovanca 60 mm (lepljenje in vogalno rezkanje) Naprava za pršenje plošče Zaščitno pršenje roba Kratki obdelovanci

Stanje: zelo dobro (rabljeno), Hebrock AKV 3005 Edge Banding Machine Well-equipped, available for inspection before purchase PRE-MILLING cutters glue application by roller, with glue discharge function second glue pot included pneumatic pre-cut guillotine pressure rollers finishing saw top-bottom milling unit, R1–R2 radius adjustment pneumatically controlled profile scraper interchangeable corner rounding unit for 1mm and 2mm flat scraper polishing unit max edge banding thickness (in coil): 3mm Iisdjwy Uhpepfx Ah Deh max strip thickness: 12mm feed: 2 speeds machine well-maintained, in very good condition

Stanje: rabljeno, Leto izdelave: 2018, Edge Banding Machine AKV 3006 DK-F with Jointing Cutter Unit including DIA Tools - Jointing thickness up to 40 mm - Workpiece thickness up to 3 mm - Combination milling station Radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edge materials up to 3 mm - Workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable knives (combination design) and fine adjustment of the cutter from the operator side - Provision for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double roller top pressure beam - Aggregate viewing window from the rear and operator side of machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m / min - Panel thickness: 8 - 40 mm - Weight: depending on configuration approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment (1 pc) Switchable radius/chamfer for combination milling stations. Switching between chamfer or flush is manual by repositioning the stop flap inside the machine. Buffing unit (polishing mop): 1 pc Corner rounding cutter: 1 pc, incl. combination tool and pneumatic radius/chamfer adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper: 1 pc, incl. pneumatic retraction device, radius R 2.0 mm Flat scraper: 1 pc with pneumatic control Glue station quick-change system including second glue pot and downward glue discharge (1 pc) for rapid color change Iiodpfx Ahjxfh Tme Dsh Horizontal grooving saw unit into the edge: 1 pc, incl. pneumatic retraction and groove tool Separate extraction for jointing unit: 1 pc, direct connection on the jointing unit, vertical above, d = 80 mm for optimal extraction performance; strongly recommended from model AKV 3005 DK-F Ball bearing for corner rounding cutter, 24.1 mm: 1 pc Ball bearing for corner rounding cutter, 24.2 mm: 1 pc Replacement motor 0.37 kW for corner rounding cutter, with quick-change system including radius cutter R 1 Replacement spindles, 1 set = 2 pcs 1 set quick-change motors for longitudinal machining, top and bottom, including tool R 1 Compressed air requirement: 100 – 150 l/hr Location: Nattheim

Stanje: rabljeno, Leto izdelave: 2005, Rabljeni stroj GM020.0029 Leto izdelave: 2005 AKV 3005 DK-F 8 mm izvedba 1. Frezalna postaja: Kombi Čistilna postaja Frez za zaobljene robove Spojni frez Ravninski strgalo z dvigom Profilno strgalo Isdpfx Ahsw In R Ee Djih Podvozje Pnevmatska nastavitev freze SPS krmiljenje Priprava za zamenjavo bazenov

Stanje: rabljeno, Leto izdelave: 2011, pnevmatska nastavitev rezkarja (ravno/radij) Kombinirana rezkarska postaja R=2 Rezkar zaokroževanja robov R= 2 do 40 mm Spojni rezkar do 40 mm Ravno strgalo Profilno strgalo R = 2 Kratki obdelovanci SPS krmiljenje z zaslonom na dotik Pro Face Gnezdenje Hlajenje/antistatično pršenje - airtronic Zaščitno pršenje roba Riepe z vključenim zamenljivim rezervoarjem Debelina obdelovanca 8 - 60 mm Mehanska pritrditev roba Odvzemna odprtina: 140 mm Dimenzije: Dolžina z izpostavo: 4984 mm Globina z valjčno mizo: 1425 mm Največja višina: 1618 mm Višina delovne mize: 888 mm Teža: 1400 kg Lokacija skladišča: Nattheim Iedswmf E Sopfx Ah Doih

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3658, moč: 9,5 kW (12,92 KM), vhodni tok: 400 A, vhodna frekvenca: 50 Hz, Ponujeni stroj izvira iz hobi delavnice in je glede na svojo starost v nadpovprečno dobrem stanju. Iodpfxexnz E Io Ah Dsih Možen je ogled na lokaciji in predstavitev po predhodnem dogovoru. Možna je tudi pošiljka preko špediterja. Približno 700 kg, dolžine 3 metre.

Stanje: rabljeno, Robna lepilka Hebrock AKV 3005, dobro opremljena, možnost preizkusa pred nakupom. Tekočine pred rezkarji, predrezkarji, nanos lepila z valjem, ima izpust lepila, drugi lonec za lepilo v kompletu, pnevmatska predgiljotina, pritisni valji, končna krožna žaga za rez, gornja-donja rezkalna enota, R1–R2 pnevmatsko nastavljiva, profilna strgala, enota za obdelavo vogalov, tekočine pred strgali, ravna strgala, polirka, maks. debelina robnega traku v roli 3 mm, Isdow I Sp Sspfx Ah Deih max. debelina obdelovanca 12 mm, stroj v zelo dobrem stanju.

Stanje: rabljeno, Leto izdelave: 1992, Used machine Year of manufacture: 1992 Max. workpiece height: approx. 40 mm Min. workpiece length: approx. 250 mm Min. workpiece width: approx. 70 mm Feed rate: approx. 11 m/min Ready for operation in approx. 4-5 min Power consumption: approx. 11 kW With quick-melt glue pot Isdowka Shepfx Ah Dsih Pneumatic edge trimming up to 3 mm With trim saw for edge thickness up to 5 mm Equipped with a milling station (optionally fitted with combination indexable insert cutters) for radius, straight, and chamfer milling Support arm, foldable and extendable to the front With undercarriage Dimensions (L x W x H): 3600 x 1400 x 1200 mm Weight: approx. 670 kg Availability: short notice Location: Röllbach

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), A right-handed Hebrock edge banding machine is available. Workpiece thickness range: 10mm–50mm, minimum workpiece width: 70mm, minimum workpiece length: 250mm, edge thickness (coil material): 0.5mm–5mm, maximum edge height: 55mm, feed rate: 10m/min. Machine dimensions (L/W/H): approx. 3000mm/1500mm/1300mm, weight: approx. 700kg. On-site inspection is possible. Iisdpfew A R S Nex Ah Doh

Stanje: rabljeno, Leto izdelave: 1994, for pre-glued edges including a large quantity of edge material with double-sided cantilever end cap station 3-roller feed Ijdpfevwfzvex Ah Doih used, in good condition Make: Hebrock Model: AKV-83 Year of manufacture: 1994 Edging thickness: 1.0 mm Max. workpiece height: 50 mm Min. workpiece width: 50 mm Min. workpiece length: 170 mm Space requirement: approx. 1700 mm x 690 mm x 500 mm Location: 97447 Gerolzhofen, free loaded on truck, unpacked Handover in as-inspected condition without warranty or guarantee

Stanje: dober (rabljeno), Leto izdelave: 2005, Znamka: Hebrock Model: AKV 88 D Št. stroja: 569-P3 Letnik: 2005 Tehnični podatki: Maksimalna debelina robnega traku: pribl. 3 mm Iisdpfx Ahjq Ihxpe Djh Maksimalna delovna višina: 50 mm Minimalni notranji radij: pribl. 8 mm Hitrost podajanja: 0–7 m/min Čas segrevanja: pribl. 6,5 min Motor: 9,3 kW, 50 Hz, 400 V Dimenzije stroja (d × š × v): 1360 × 690 × 1220 mm Teža: pribl. 150 kg Zaloga št.: 2001921BXA

Stanje: rabljeno, Leto izdelave: 1991, Used machine Year of manufacture: 1991 Max. workpiece height: approx. 40 mm Min. workpiece length: approx. 250 mm Min. workpiece width: approx. 70 mm Iisdewka Tlspfx Ah Djh Feed rate: approx. 11 m/min Ready for operation in approx. 4-5 min Power consumption: approx. 11 kW - With heated infeed ruler - With quick-heating glue pot - Pneumatic roller trimming up to 3 mm - With cross-cut saw for edge thicknesses up to 5 mm - With milling station, optionally equipped with combined indexable insert cutters for radius, straight and chamfer milling - Folding and extendable outrigger to the front - With chassis - With integrated extraction system Dimensions (L x W x H): 3600 x 1400 x 1200 mm Weight: approx. 670 kg Availability: short notice Location: Hochheim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Marke: Hebrock Modell: AKV 83 F Baujahr: 2004 Maschinennummer: 10759 Technische Daten: Werkstückdicke: 10 - 50 mm Vorschubgeschwindigkeit: 3 - 4 m/min Elektrischer Anschluss: 220/380 Volt, 50 Hz Leistung: 3 kW Abmessungen (komplett): 1750 x 800 x 1250 mm Gewicht: ca. 95 kg Heizung: 3 kW, mit stufenloser elektronischer Temperaturregelung, 0 - 650 °C Iodeu Racxspfx Ah Dsih Motor: 3,5 kW Lager-Nr.: 2002311BXA

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 585, Blagovna znamka: Hebrock Model: AKV 1000 V Št. stroja: 585 Letnik izdelave: 1995 Iiedpfxeib H Slo Ah Doh Tehnični podatki: Maksimalna debelina robnega traku: 3 mm Maksimalna višina robnega traku: 50 mm Maksimalna podajalna hitrost: 7,5 m/min S čelilnim nožem Dolžina delovne mize: 2200 mm Motor: 7 kW, 50 Hz, 230/400V, 3-fazni Transportne dimenzije: Dolžina: 220 cm Širina: 115 cm Višina: 150 cm Inventarna številka: 2001164BXM

Stanje: dober (rabljeno), Leto izdelave: 2002, I am selling a HEBROCK AKV 088D edge banding machine for shaped parts. Year of manufacture: 2002. Suitable for curved components. Iedpfxevx D Aue Ah Dsih Good condition, inspection possible! It is also possible to additionally purchase the HFF08 radius milling unit.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3074, hitrost podajanja osi Y: 10 m/min, skupna dolžina: 4.984 mm, višina obdelovanca (maks.): 60 mm, skupna širina: 1.425 mm, največja debelina roba: 3 mm, skupna višina: 1.618 mm, skupna masa: 1.400 kg, vrsta vhodnega toka: trifazni, vrsta nastavitve višine: mehanski, vhodna napetost: 400 V, premer ekstrakcijske šobe: 140 mm, delovna višina: 888 mm, vhodni tok: 32 A, vhodna frekvenca: 50 Hz, premer povezave za izpihovanje: 140 mm, leto zadnje generalne obnove: 2025, For sale due to the purchase of a new machine: our reliable edge banding machine, bought new in 2016. The machine operated in an 8-person carpentry workshop. It underwent a complete refurbishment in January 2025, which included new radius scrapers, new milling tools, and new polishing discs. The pre-milling unit was sharpened; the glue roller clutch was replaced. The glue tank was fully refurbished and cleaned. The machine is suitable for both EVA granulate (e.g. Henkel Dorus KS351) and PUR adhesive applications. The pre-milling amount, edge banding material thickness, and upper/lower milling tool positions can be conveniently adjusted from outside the machine housing using handwheels. The control system allows you to save custom edge banding programs. For 0.4 mm and 2.0 mm edge materials, the machine switches pneumatically between programs. Main Specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100-150 l/min) - Touchscreen display Iisdpfsxlr S Hex Ah Deh - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness from coil: 0.5-3.0 mm - Workpiece thickness: 8-60 mm (edge banding possible on 60 mm thick material) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm for end trimming saw / 220 mm for end rounding - Processing units: - Diamond pre-milling unit (12,000 rpm) - Release agent tank/spray - Gluing unit - Edge trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/spray - Flat scraper - Polishing disc Price does not include VAT.

Stanje: novo, Leto izdelave: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures edge processing in every stage, as it comes equipped with all the components you need for your requirements: pre-milling unit, end trimming saw, milling unit, radius scraper, corner rounding unit, flat scraper, and buffing unit. For even greater flexibility to achieve the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and with adhesive application to the workpiece for edge material up to 3 mm; pre-milling unit (incl. diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change system including glue discharge device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination design), corner rounding unit, radius scraper, flat scraper (including pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change system for corner rounding unit F5/08/5 Additional changeover motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge F5/27. Nesting for milling unit and radius scraper Iiodpfelht Hwjx Ah Djh F5/30. Pneumatic 3-point adjustment (for radius, chamfer, flush milling) Location: Ex stock 54634 Bitburg - Available in week 4 -

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with all the features you need to achieve perfect edges right from the start: diamond-tipped jointing cutters ensure that workpieces are excellently prepared for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Iedpfx Aji Am U Doh Doih Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change reservoir system including glue drainage device, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination version), robust chain feed, ball bearing mounted double roller top pressure, inspection window from the rear of the machine, extendable workpiece support, feed approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling)