Stroj za robne trakove

Hebrock AKV-83

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Marke: Hebrock Modell: AKV 83 F Baujahr: 2004 Maschinennummer: 10759 Technische Daten: Werkstückdicke: 10 - 50 mm Vorschubgeschwindigkeit: 3 - 4 m/min Elektrischer Anschluss: 220/380 Volt, 50 Hz Kdjdpsu Racxjfx Agfot Leistung: 3 kW Abmessungen (komplett): 1750 x 800 x 1250 mm Gewicht: ca. 95 kg Heizung: 3 kW, mit stufenloser elektronischer Temperaturregelung, 0 - 650 °C Motor: 3,5 kW Lager-Nr.: 2002311BXA

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, HOLZ-HER Edge Banding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program changeover and tool adjustment via the 18.5” 16:9 color touchscreen display. Short glue system heat-up time with the GlueJet (GJ 301 automatic): approx. 2 to 3 minutes, depending on glue type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR adhesive and cleaning the system is effortless and can be done within minutes. Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective foils, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, ideal for workshops processing a wide variety of edge types. The DIA tooling features multi-stage design, allowing switching between radii and chamfers as needed – from longitudinal milling to corner copying and profile scraping. The extendable workpiece support and extended feed-in section with air cushion table make handling large workpieces easier. A guidance system assists with feeding small workpieces into the machine. Edge thickness for coil material: 0.4 – 3 mm (material-dependent) Kdedpsyfgrpjfx Agfet Edge thickness for strip material: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet for both EVA and PUR quality adhesives, with minimal effort. Compatible with all standard edge types, including high-gloss, supermatt, and solid wood edges up to 15 mm. Motorized adjustment of the infeed guide fence Narrow-part guidance system Prepared for connection to a RETURN system Motor-driven pressure bridge with upper belt drive Multifunction units for quick setup of radius, flush, and chamfer operations Vertical & horizontal spray systems And much more. Delivery, installation, and operator training of the machine can be arranged directly through us for an additional charge. The machine is currently located at our dispatch warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign-language version, only the German version is legally binding. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Stanje: zelo dobro (rabljeno), SICAR Forte 400 Thickness Planer Working width: 400 mm Planing height: 300 mm Cutter block with traditional knives 4-knife cutter block Cutter block speed: 5,200 rpm Ksdpfx Agot Rp Hxsfjdt Electric adjustment (raising/lowering) of the worktable Main motor power: 3 kW 3 feed speeds CE certificate

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hotmelt adhesive application to straight workpieces (EVA/PUR glue tank with drain function optional), twin-motor HF end-trim saw station, HF combination milling unit, corner copying unit, chain feed, motorized upper pressure with encoder and double roller upper pressure with ball bearings, extendable workpiece support rail, signal lamp for workpiece sequence, integrated transport control for contactless operation of processing functions, and L-Motion (6 axes) control. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 10 – 60 mm. • Two counter-rotating, program-controlled jointing units with diamond-tipped spiral cutters ensure clean, tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity; drip-free with glue reserve feeding from below (excess glue is automatically returned to the pot); precise glue application via glue roller; separate glue roller temperature setting; electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on for longer periods without use). Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change. Kjdpfxjl Rix Ej Agfodt Optional: Quick-change system for glue pot. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, counter-conical pressure rollers with spring tension, providing optimal adhesion of the edge material to the workpiece. Motorized adjustment of the pressure zone (1xL-Motion). • High-frequency end-trim saw equipped with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades; pneumatically tiltable from the control panel. • HF combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters. Motorized adjustment of the milling station (4xL-Motion). • Corner copying unit: automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge material. (Not recommended for soft and post-formed profiles). Optional one-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1xL-Motion). • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module. • Standard equipment includes LED lighting and LED-Motion system. • Optional: motorized adjustable infeed rail from the control panel (1xL-Motion). Optional finishing units (3 free slots): - Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder; radius selection (R1/R2) switchable from the control panel. - Surface scraper unit: removes glue residues from the workpiece surface along the glue joint with a gentle scraping cut; pneumatic ON/OFF control via air cylinder. - Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, for super-finish results.

Stanje: rabljeno, številka stroja/vozila: 007645, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing cutter: yes Multi-function unit: yes Top trimming unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Kodpfxewuz Nio Agfodt Working units: 9 pcs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, številka stroja/vozila: 241.125, Funkcionalnost: popolnoma funkcionalen, Horizontalna žaga panelka proizvajalca Schelling, namenjena rezanju lesnih materialov. HPO – program za optimizacijo rezanja Izvlek žaginega lista: največ 95 mm Pomik vozička žage do 120 m/min Dolžine reza: Model FH 4 430 - 4.300 mm Možno ogledati v delujočem stanju do začetka leta 2026 (načrtovana demontaža) Kdedjx Ebzdjpfx Agfet Največji premer žaginega lista – 350 mm Izvlek – 95 mm Odpiranje vpenjalca 90 mm Moč motorja žage – 15 kW Premer predrezila 300 mm Podajalna hitrost naprej do 80 m/min nazaj 80 m/min Podajalna hitrost žage naprej do 120 m/min nazaj 120 m/min

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Rabljeni stroj GM020.0068 AKV 3003 DK - F Leto izdelave: 2007 Izvedba: 3 mm 1. rezkalna postaja: Kombinirana Površinski vlečni strgalnik z izkopom Kdjdpew Nih Iefx Agfjt Podvozje Pnevmatska nastavitev rezkanja Ročica končnega stikala, naklon 7,5°

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, - PVC Primus, 3 mm PVC kasetni sistem - Lepljenje, porezovanje poravnano, poravnalno rezkanje, posnetje robov, radijsko rezkanje - Strgalo, polirni agregat - Dimenzije: 4700 x 1400 x 1650 mm - Teža: 1300 kg - Delovne dimenzije: Dolžina 4500 mm Globina 1020 mm Višina 1630 mm Kedpfx Aewv Uq Asgfedt - Priključni nastavek: 140 mm Ø - Širina obdelovanca: min. 60 mm - Pomikalna hitrost: 11 m/min - 6 bar - 400 voltov, stisnjen zrak - Debelina robnega traku 8 mm pri trakastem materialu, 2 mm pri kolutnem materialu - BREZ predrezkalnega agregata - Pnevmatski cilindri novi Pošljemo po dogovoru za doplačilo! Zaradi starosti rabljene stroja je pri prodaji poslovnim kupcem izključena garancija.

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE (also SOFTFORMING) with through-feed drilling machines, splitter, and high-speed automatic conveyor technology. Configured as follows: A) Infeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner C (1) Kedpfxottgy He Agfjdt B) 1st Double-sided sizing and edge-banding machine "BIESSE" model Stream SB1 11.0 Softforming C) 1st Rotation station (90° LONGITUDINAL–CROSS) "RBO (BIESSE)" model GPK-1 D) 2nd Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 9.5 E) 2nd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-2 F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) H) 3rd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" model Split 4-84 LT L) Outfeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner SC (2)

Stanje: zelo dobro (rabljeno), Double-sided EDGE BANDING AND FORMATTING MACHINE (First machine in a production line) Edge material (coils) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection: Enclosed cabin Side adjustment of aggregate carrier: manual FORMATTING PROCESSING (for each side): 2 x Hogging unit DT 10 (Kw 5.8 x 2) Free slot for jointing milling unit FS Jointing milling unit ES30 + ER30 (Kw 5 x 2) 0° - 90° Universal milling unit softforming SF 10 (2 x Kw 2.4) 0° - 45° Spraying unit (for liquid anti-adhesive) Kedst N Ix Repfx Agfsdt EDGE BANDING SECTION (for each side): Gluing unit (Hot melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Pre-heating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions) mm 800 (Guillotine CI10+CS10+RL10) - Edge magazine for coils (No. 6 compartments) Milling unit RS 10 (Kw 1.3 x 2) Milling unit softforming RF 10 / SF (Kw 0.65 x 2) Multi-profile milling unit RF 30 (Kw 0.65 x 2) Universal milling unit for grooving/rebating and profiling FB 30 (Kw 4.5 x 2) 0 - 90° Multi-profile scraper blade unit RB 30 Flat scraper blade unit RC 05 / Soft Spray aggregates (for polishing fluid) + Buffing unit SZ 30 (Kw 0.37 x 2)