Brandt Kdn 330 nakup rabljenega (98)

Stanje: rabljeno, Leto izdelave: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granulate Glue reservoir located underneath the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating directions automatic edge magazine for coil and fixed-length materials Pressure zone with pneumatically driven main pressure roller and special post-pressure rollers for consolidating the upper and lower glue joints Centrally adjustable top pressure Central manual chain conveyor lubrication Operator panel at machine infeed Cut-off saw unit for front and rear edge overhang; high-precision linear guide 2 motors, each 0.18 kW Swivel range straight and bevel cutting 0-15 degrees Flush trimming unit top and bottom with vertical and horizontal tracing Swivel range 0-15 degrees with 2 milling motors with insert cutter combination straight/radius Digital counters allow quick and defined, i.e. repeatable settings Two-point pneumatic adjustment of upper and lower milling motors Scraper unit for finish processing with horizontal/vertical tracing Workpiece support extendable to 350 mm Gedpfxjxya Rto Afqsil Integrated tracking control for contactless operation of processing functions. Adjustable via keypad and LED display Workpiece thickness: 8 - 50 mm Edge thickness: 0.4 - 3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3150 mm Availability: short notice Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2006, Used machine Year of manufacture: 2006 Equipment and technical data: - with gluing unit for hot-melt adhesive granulate - Suitable for processing PU glue granulate in compliance with adhesive processing regulations - Glue reservoir located below the glue roller - Glue application to the workpiece via glue roller in both co-rotating and counter-rotating directions - with contact heating shoe for preheating the workpiece - automatic edge magazine for coil material and fixed lengths - pressure zone with pneumatically driven main pressure roller and special post-pressure rollers for compacting the upper and lower glue joint - centrally adjustable top pressure - central manual chain lubrication - control panel at machine infeed - End trimming unit: - for front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Swivel range for straight and bevel trimming 0-15 degrees - Flush trimming unit: Gisdpfx Afjwkbd Ejqjl - top and bottom with vertical and horizontal tracing - Swivel range 0-15 degrees with 2 milling motors with reversible knife combination for straight/radius - Digital counters enable quick and precise, i.e. repeatable settings - Two-point pneumatic adjustment of upper and lower trimming motors - Scraper unit for finishing with horizontal/vertical tracing - Extendable workpiece support up to 350 mm - Integrated track control for contactless control of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8 - 50 mm - Edge thickness: 0.4 - 3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Stanje: rabljeno, številka stroja/vozila: 008371, Tip uporabljenega roba: tanek rob, debel rob, masiven les Sistem lepljenja: EVA Gedpfxjx Swfbj Afqeil Multifunkcijska enota: da Največja pomična hitrost: 16 m/min Največja debelina plošče: 60 mm Delovne enote: 7 št.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, številka stroja/vozila: 0-261-20-4583, Kantenschleifmaschine BRANDT, Typ O KDN 200 Ambition 1200, gebraucht, Baujahr: 2010 Betriebsdruck: 6 bar Stromversorgung: 400 V – 3 Phasen – 50 Hz Gesamtleistung: 4 kW Werkstückstärke: von 0,3/0,4 bis 8,5 mm Absaugstutzen: 3 x 60 mm Arbeitshöhe: 950 mm Vorschub/Anleimgeschwindigkeit: 10 m/min Coil-Abschneider max.: 0,4 mm – 3,0 x 45 mm Geräuschemissionen dB(A): 84 bis 87 Transport-/Gesamtabmessungen: L 3.450 x B 1.300 x H 2.180 mm Eigengewicht: 1.200 kg Ausstattung: Verleimen, Endabschneiden, Ober- & Unterschneiden, Abkratzen Preis: 4.900 € zzgl. MwSt., verhandelbar, FCA: Oradea/Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Englisch. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim romana. Gijdpfeh Ak D Usx Afqsl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 50 mm, največja debelina roba: 3 mm, največja hitrost vrtenja: 10.960 obr/min, Oprema: CE označba, Aucun prix de réserve – vente garantie au plus offrant ! DÉTAILS TECHNIQUES Épaisseur maximale du panneau : 50 mm Hauteur minimale du panneau : 8 mm Hauteur maximale du panneau : 50 mm Épaisseur minimale du chant : 0,4 mm Épaisseur maximale du chant : 3 mm Nombre de positions : 1 Unité 1 Unité : Coupe en bout Nombre de moteurs : 2 Engagement automatique temporisé : oui Puissance moteur : 0,18 kW Vitesse : 10 800 tr/min Unité 2 Unité : Fraiseuse de chant Nombre de moteurs : 2 Engagement automatique temporisé : oui Puissance moteur : 0,27 kW Vitesse : 10 960 tr/min Unité 3 Unité : Racleur de chant Système de contrôle : BFS DÉTAILS DE LA MACHINE Puissance totale installée : 4 kW Gsdpfxexw Tuge Afqoil ÉQUIPEMENT Pression supérieure Pression par rouleaux libres Guide de support de panneau Magasin pour la bobine Système de collage EVA Bac à colle pour colle thermofusible Rail de rouleaux presseurs de chant Nombre de rouleaux presseurs : 3 Marquage CE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 2.560 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 5.760 mm, višina obdelovanca (maks.): 60 mm, največja debelina roba: 12 mm, vrsta nastavitve višine: električni, višina plošče: 60 mm, Brandt 1650 Highflex with Return Conveyor and PU Glue Box – Top Condition Year of Manufacture: 2010 Operating Hours: 2,587 h Godpfx Aevnwf Uofqsil Total Edge Length: 216,000 m Maximum Edge Thickness: 12 mm Maximum Panel Thickness: 60 mm Maximum Roll Material Thickness: 3 mm Minimum Workpiece Width: 70 mm Feed Speed Max: 18 m/min Stepless Feed Adjustment Motorized Height Adjustment Adhesive System: Granulate Pre-melting Tank BRANDT Glue System: QUICKMELT KD 2 x PU Glue Pots Strip Magazine Jointing Milling Unit Trimming Saw Unit with 2 Motors Flush/Radius/Chamfering Stations: 1 Corner Copying Unit with 2 Motors Scraper Unit Profile Scraper, Flat Scraper Buffing Unit Synchronized Units NC Axis/ Axes Design: Right-Hand Machine Machine Length: 5,760 mm Conformity Marking: CE Marked Return Conveyor: Ligmatech Boomerang PU Glue Box Machine is still in operation – inspection welcome, available upon arrangement No warranty Collection only, forklift available Net price for edgebander: €26,000 plus VAT Net price for panel return conveyor: €7,000 plus VAT Machines can also be sold separately Price negotiable

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!) Gsdpec Tmygsfx Afqoil

Stanje: rabljeno, številka stroja/vozila: 008365, Pozicija 1: Enostranski stroj za lepljenje robov BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Gijdpfx Afjx Swf Uoqel Pozicija 2: Povratni transport za plošče BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 2.500 h, Jednostranná olepovačka hran na opracování rovných hran obrobků a na olepování a následné opracování různých hranových materiálů v podélném i příčném průchodu. PŘEHLED OSAZENÍ AGREGÁTŮ: Přiznávací pravítko – prodloužení o 300 mm s přídavným zařízením pro přesah lamina ZAHLAZOVACÍ FRÉZOVACÍ AGREGÁT 2 x 2,2 kW 200 Hz LEPÍCÍ AGREGÁT A12 s automatickým podáváním hrany – NANÁŠECÍ JEDNOTKA QA 65 N EVA ZKRACOVACÍ AGREGÁT FAZETA/ROVNÝ 2 x 0,35 kW PNEUMATICKÉ NASTAVENÍ ZKRACOVÁNÍ FAZETA/ROVNÝ Gijdpfxex S Nc Ee Afqol PNEUMATICKÉ 2-BODOVÉ NASTAVENÍ ZKRACOVÁNÍ Víceetapový frézovací agregát MS40 2 x 0,55 kW s protiběhem a osovým nastavením – PNEUMATICKÉ 2-BODOVÉ NASTAVENÍ kopírovacích válečků (na srovnání na tupo/radius/fazetu) MULTIFUNKČNÍ KOPÍROVACÍ FRÉZOVACÍ AGREGÁT 2 x 0,4 kW VÍCEETAPOVÝ STÍRACÍ AGREGÁT MZ 40 PNEUMATICKÉ NASTAVENÍ STÍRACÍHO NOŽE STÍRACÍ NŮŽ SPOJOVÉ SPÁRY LEPENÍ LEŠTÍCÍ AGREGÁT AGREGÁT PRO NÁSTŘIK SEPARAČNÍHO PROSTŘEDKU (OBROBEK) Sprejové zařízení na kluzný prostředek AGREGÁT PRO NÁSTŘIK ČISTICÍHO PROSTŘEDKU (OBROBEK) Řídicí systém POWERTOUCH

Stanje: rabljeno, Leto izdelave: 1996, Debelina roba: 0,4 - 12 mm Rob valja: 3 x 45 mm oz. 0,8 - 60 mm Minimalna širina obdelovanca: 65 mm Minimalna dolžina obdelovanca: 160 mm Debelina obdelovanca: 10 - 55 mm Podajanje: 13 m/min Predrezkanje (spajanje) Lepilna kad Quickmelt Lepilni del Obarjanje Poravnalno rezkanje Poševno rezkanje Polmerno rezkanje Kopiranje robov Ravno strgalo Polirni agregat Dimenzije stroja: 7450 x 1220 x 2400 mm Teža: 3000 kg Lokacija skladišča: Nattheim Gijdpsvvkd Tjfx Afqol

Stanje: rabljeno, BRANDT highflex 1440 edge bander Well equipped, Pre-milling units Glue application Pneumatic pre-cut guillotine Gsdpsv H D S Sjfx Afqjil Pressure rollers Finishing saws Top and bottom milling unit 2 x corner rounding units Profile scraper Flat scraper Polishing unit The machine features NC-controlled milling units and a pneumatic package Maximum workpiece height: 60 mm Maximum edge thickness (in rolls): 3 mm Feed speed max: 14 m/min The machine is fully operational and can be inspected prior to purchase.

Stanje: dober (rabljeno), Leplilni agregat, lepilni del, lepilna glava, grelni bazen za robno lepilko, stroj za lepljenje robov -Proizvajalec: Brandt, agregati iz stroja za lepljenje robov BRANDT KM 36 -Posamezni deli: glejte fotografije -Cena/prodaja: komplet -Gabariti skupno: 1200/800/V530 mm -Skupna teža: 122 kg Gedpfxsgylrds Afqjil

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Ta robna lepilka robnih trakov BRANDT Highflex 1440 je bila izdelana leta 2010. Idealen stroj za natančno lepljenje robnih trakov zagotavlja zanesljivo zmogljivost pri najrazličnejših lesnoobdelovalnih nalogah. Izkoristite priložnost za nakup lepilke robnih trakov BRANDT Highflex 1440. Za več informacij nas kontaktirajte. Giodsx D Ht Nopfx Afqel Vrste uporabe: Lepljenje robnih trakov

Stanje: rabljeno, številka stroja/vozila: 008367, Tip pritrjenega roba: tanek rob, debel rob, masivni les Gijdpsx Swfhsfx Afqel Lepilni sistem: EVA Spojnično rezkanje: da Multifunkcijska enota: da Maks. hitrost podajanja: 12 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 7 kos

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Single-sided edge banding machine for processing straight workpiece edges, for applying and post-processing various edge materials in both longitudinal and transverse feed. OVERVIEW OF UNIT CONFIGURATION: - Electronic control POWER CONTROL PC 20+ Gijdpsx S I Iysfx Afqol - PU top pressure rollers instead of rubber rollers - Optimization of workpiece gaps - Infeed fence extension by 300 mm with additional device for laminate overhang - JOINTING MILLING UNIT 2 x 2.2 kW 200 Hz - GLUING UNIT A12 with automatic edge feeding – Quickmelt APPLICATION UNIT – Standard application unit exchangeable for PU adhesive - Pressure zone with motorized adjustment - END TRIMMING UNIT CHAMFER/STRAIGHT 2 x 0.35 kW - PNEUMATIC ADJUSTMENT FOR END TRIMMING CHAMFER/STRAIGHT - PNEUMATIC 2-POINT ADJUSTMENT FOR END TRIMMING - PRE-MILLING UNIT 2 x 0.55 kW counter-rotating – with PNEUMATIC 2-POINT ADJUSTMENT (Flush and radius/chamfer milling) – Program-controlled adjustment of lateral tracing rollers and edge thickness – stepless – Multiple roller tracing - MULTIFUNCTIONAL PROFILE MILLING UNIT 2 x 0.4 kW with quick-change device and quick-change heads - PROFILE SCRAPING KNIFE WITH QUICK-CHANGE HEADS - Special tracing device for profile scraper - PNEUMATIC ADJUSTMENT FOR SCRAPER - GLUE JOINT SCRAPER - BUFFING UNIT - SEPARATING AGENT SPRAY UNIT WORKPIECE - CLEANING AGENT SPRAY UNIT WORKPIECE

Stanje: rabljeno, Leto izdelave: 2002, Dolžina stroja: 6240 mm Teža: 2400 kg Priključna moč: 14 kW Premer odsesovanja: 120 / 140 mm Lokacija skladišča: Nattheim Gjdpfxevvkfwo Afqoil

Stanje: rabljeno, Leto izdelave: 2015, 1 kos robne lepilke BRANDT OPTIMAT KDF440C z napeljavo in raznim priborom, skladno s fotografijami in ogledom, lastna demontaža Barva: siva Leto izdelave: 2015 Stanje: rabljeno Način plačila: predplačilo z bančnim nakazilom Skladišče blaga: mizarstvo/hala 1 Gijdpfx Afjx Ifctoqjl Dostava: Le osebni prevzem – pošiljanje za to pozicijo ni na voljo!

Stanje: dober (rabljeno), Modularni agregatni sistem, formatni obdelovalni agregat, agregat za odrezovanje, rezkalni agregat, profilno rezkalni agregat, spojni rezkalni agregat, prečni rezalni agregat, dvojni končni profilirnik, stroj za obdelavo robov, motor za zarezovanje, motor za odrezovanje, rezkalni motor za stroj za obdelavo robov Gijdpfxogy Da So Afqsl - Proizvajalec: Homag, prečni rezalni agregati iz stroja za lepljenje robov BRANDT KM 36 - Motorji: Homag Tip LF-40-L / Perske KNS 22.08-2 - Moč: 0,27 kW / 12000 obr/min / 10800 obr/min - Napetost: 220V / 200 Hz - Pnevmatske komponente: Bosch - Posamezne komponente: glej fotografije - Cena/prodaja: komplet - Dimenzije skupaj: 500/560/H670 mm - Teža: 51 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Edge banding machine Brandt KDF 530 C with pre-milling, corner copying, two scraper blades and Riepe spray systems. A video of the machine in operation can be provided upon request. The machine is highly automated. Edge thickness: approx. 0.4 – 8 mm Workpiece height: approx. 10 – 50 mm Feed speed: approx. 11 m/min Soundproof hood Extendable workpiece support Extraction connection: 1x 200 mm, 1x 100 mm, including the pictured piping PC16 control unit with color display for easy machine operation Units: Top pressure manual adjustment with SIKO counter Infeed fence manual adjustment with SIKO counter Riepe separating agent spray system Pre-milling unit with Leitz Whispercut diamond cutters, resharpened Gluing unit switchable for with or against feed direction Pressure zone with 3 rollers Cross-cut saw with 2 motors, programmable for straight or beveled cuts Combi milling unit with motorized lateral adjustment Radius scraper R2, pneumatically adjustable Corner rounding unit R2 with diamond cutter, 1 motorized, pneumatically adjustable between thin and thick edge Glue joint scraper pneumatically retractable with large roller Riepe cleaning agent spray system Buffing unit Hood locking CE marking Operating manual as folder and CD All indexable inserts on the milling units and scrapers have been renewed or rotated, saws sharpened, pre-milling cutters resharpened, buffing wheels renewed. The machine is thus immediately ready for operation. Only the diamond cutter on the profile milling unit has not been replaced, but is still sharp. Minor paint touch-ups carried out. Approx. 3500 operating hours. The condition of the machine speaks for itself. Occasionally, the computer reboots during operation (mostly at high room temperatures). This has never been a problem for us – you can continue working during the reboot. Giodpjxd Dudjfx Afqjl Machine dimensions approx. 4800 x 1200 x 1800 mm (LxWxH) Weight approx. 1900 kg You are welcome to inspect the machine by appointment at our site. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this seller”.

Stanje: rabljeno, številka stroja/vozila: 008363, Tip nameščenega roba: tanek rob, debel rob, masivni les Sistem lepljenja: PUR Gijdpjx Swddefx Afqel Frezanje spoja: da Multifunkcijska enota: da Maks. pospeševalna hitrost: 18 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 7 št.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, skupna višina: 3.140 mm, delovna višina: 1.000 mm, Naprodaj krivulni oblepilni stroj Optimat KTD 820, v zelo dobrem stanju Tehnični podatki: • Leto izdelave: 2004 • Višina mize s priseski: 1000 mm • Vakuumska črpalka: 6 m³/h • Debelina obdelovanca: 16–40 mm • Min. širina obdelovanca: 100 mm • Min. dolžina roba: 250 mm • Višina roba: 20–45 mm • Debelina traku: 0,4–3 mm Giodox N S Ifepfx Afqsl • Prostornina posode za lepilo: pribl. 0,5 l • Delovna temperatura: 140–220°C • Hitrost podajanja: nastavljiva • Višina stroja: 3140 mm • Transportna višina: 2000 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Brandt Edge Bander Type: Profi KDF 670 Single-sided edge banding machine in right-hand, workshop-appropriate configuration for hot-melt adhesive bonding. Quick-change adhesive unit for hot-melt adhesive, suitable for processing PU adhesive granulate in compliance with adhesive processing regulations. Infrared activation of hot-melt adhesive Automatic edge magazine for coil material for thick PVC/ABS Heavy-duty pressure zone Centrally adjustable top pressure Control panel at machine infeed PC 16 electronic controls Technical Data: Edge thickness: 0.4 - 8 mm Coil separation max. 3 x 45 mm or 0.8 x 60 mm Workpiece thickness: 8 - 55 mm Feed rate: max. approx. 14 m/min Tooling set R=2 mm (can be exchanged for R=3 mm) Quickmelt adhesive unit Motorized height adjustment of top pressure - PC 16 Adjustable infeed fence Program-controlled infeed fence adjustment Additional unit for laminate overhang Program-controlled pressure zone Release agent applicator, workpiece Jointing cutter unit Set of jointing cutters, diamond-tipped End trimming unit, chamfer/straight 0 - 15 degrees Pneumatic adjustment for end trimming (chamfer/straight) Flush trimming unit Pneumatic adjustment of trimming unit Pneumatic 2-point adjustment vertical tracing rollers Jointing unit 0 - 25 degrees, synchronized flush trimming Radius cutter set (can be swapped for chamfer cutter) Program adjustment for edge thickness Pneumatic adjustment side tracing rollers Profile trimming unit, top and bottom - For profiling/flush trimming of leading/trailing edges on post- and softforming components, as well as corner rounding of thick PVC edges. / Wood edges possible to a limited extent Scraper with quick-change heads Pneumatic adjustment of scraper Flat scraper for glue joint Cleaning agent applicator, workpiece Buffing unit with 2 motors Electrical and mechanical preparation for connecting edge banding machine to Ligmatech part return systems ZHR01/ZHR02/ZHR15 Weight: 3000 kg Total connected load: 15 kW Length: 5880 mm Location: ex works, customer site - Available immediately - Gijdpfx Aox Nrtnofqel Machine must be dismantled by the buyer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Brandt Optimat KDF 420 robna lepilka Gijdpfxjx Dzw No Afqol Krmilnik Powercontrol PC 20 Debelina nalepka 0,4-8 mm Višina obdelovanca 8-60 mm Predhodna obdelava z DIA rezkarji Odbijanje robov Ravno in radijsko rezkanje Radijski strgalo Ploščati strgalo Polirna enota Dolžina stroja 4360 mm Navodila za uporabo in orodje Letnik izdelave 2008 Cena 15000,-

Stanje: dober (rabljeno), Profile scraper unit, profile scraper blade, flat scraper unit, finishing unit, modular aggregate system, format processing unit, double-end profiler, edge processing machine, scraper blade for edge processing machine -Manufacturer: Homag, profile scraper blade from edge banding machine BRANDT KM 36 / KM35 -Quantity: 1 piece available Gisdpfx Asgylq Sofqel -Dimensions: 510/430/H570 mm -Weight: 62 kg

Stanje: rabljeno, številka stroja/vozila: 007517, Type of applied edge: thin edge, thick edge, solid wood Gedpjwuz E Refx Afqeil Glue application system: EVA, hot air Jointing unit: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 9 pcs