Stroj za oblaganje robov

Brandt KDF550C

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, številka stroja/vozila: 0-241-06-5232, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 12.608 h, največja višina reza: 125 mm, največja širina rezanja: 2.200 mm, dolžina rezanja (maks.): 4.300 mm, Panelna žaga Holzma HKL11/43/22 Maksimalna širina reza: 4300 mm Maksimalna dolžina reza: 2200 mm Maksimalna višina reza: 125 mm Žaga je v stalni uporabi, zato jo je mogoče videti med delovanjem. Kdedpsxfvp Ajfx Ah Usu Stroj bo na voljo od 02/03/2026.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2013, Used machine Year of manufacture: 2013 Features and Technical Specifications: - Machine fully overhauled: - new Glue Jet 301 glue system (upper part 1 mm) - all units checked - all cutters sharpened - all knives replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrical supply for variable feed: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 controller with 15" touchscreen - ECO MODE energy-saving function - Infeed fence 1350 mm, motorized adjustment - Jointing milling unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for jointing the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Edge feeder 1901 fully automatic Ksdpfxszlbpzs Ah Uedu - Glue application station Glu Jet GJ301 automatic: - 2.3 kW, 50 Hz - Granulate storage hopper - Pressure section 1913 MOT - End trimming unit 1918 (60 mm) pneumatic - Multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM-technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM-technology - Scraper unit 1929 MOT2: - HW reversible carbide inserts for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Oblepilka robov BIESSE Akron 1440A Na voljo april/maj 2026 CE certifikat Leto proizvodnje: 2017 Možnost pregleda stroja pred nakupom Kjdjyh A I Aspfx Ah Uodu

Stanje: rabljeno, številka stroja/vozila: 005108, Maks. širina panela: 4300 mm Kdedpswuck Iofx Ah Ueu Maks. dolžina panela: 4250 mm Maks. izteg glavnega žaginega lista: 95 mm

Stanje: rabljeno, številka stroja/vozila: 007848, Type of applied edging: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Kdodswkrqpopfx Ah Uou Joint trimming: yes Multifunctional unit: yes Max. feed speed: 20 m/min Maximum panel thickness: 60 mm Processing units: 8 pcs

Stanje: rabljeno, številka stroja/vozila: 008357, Največja širina panela: 4400 mm Največja dolžina panela: 4300 mm Ksdpfx Ajx A Tk Esh Ujdu Največji izvlek glavnega žaginega lista: 75 mm Število vpenjalnih čeljusti: 9

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, višina obdelovanca (maks.): 60 mm, največja debelina roba: 15 mm, hitrost pomika os X: 20 m/min, vrsta aktuacije: električni, skupna dolžina: 6.200 mm, skupna masa: 3.100 kg, Tornado+ – popolnoma obnovljen / KOT NOV Naprave za nanašanje premaza GS, RS, po želji možnost teksturne obdelave Lepljenje, prilepljanje robnih trakov, obrezovanje, stranska obdelava, obdelava z radiusom, kopiranje kotov AKF, strgalo R1/R2 s funkcijo nanašanja folije na 1 Tiskanje na trak / Synchro-Flex Kedpezkk Drjfx Ah Uodu PUR-lepljenje v osnovni izvedbi Dimenzije obdelovanca: Minimalna širina: 70 mm Minimalna višina: 8 mm Maksimalna višina: 60 mm Minimalna dolžina: 150 mm Debelina plošče: Maks. 60 mm Debelina robov: 0,3 – 15 mm -CM – sistem za lepljenje CombiMelt Modularna zasnova za enostavno zamenjavo predgretih rezervoarjev. Primerno za obdelavo EVA- in PUR-taljenih lepil ter vseh običajnih granul za čiščenje. Omogoča obdelavo različnih vrst lepil s pomočjo vseh delovnih parametrov (kot so količina doziranja, predgrevalna in delovna temperatura) preko posameznih delovnih programov. -Posamezni pogon z vso prilagodljivostjo za individualno vključitev posameznih obdelovalnih motorjev preko sistema Power-Bus Posebnost: stroj s paketom Speed! 20 m/min s funkcijo kopiranja kotov!! Orodja in verižne plošče – NOVO Možnost prodaje stroja z garancijo. Pregled in demonstracija po dogovoru.

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text Ksdpfsxwaz Hex Ah Usdu OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...

Stanje: rabljeno, številka stroja/vozila: 007645, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing cutter: yes Multi-function unit: yes Top trimming unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Kodpswuz Nijfx Ah Uedu Working units: 9 pcs

Stanje: rabljeno, Leto izdelave: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial feed chain 1"1/4 Jointing milling unit FI-502 Gluing unit VC-710 Cut-off unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction/form milling units CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC with 2 positions Flat scraper RCC-701 Workpiece thickness: 10–65 mm Max. workpiece height with form milling unit (depending on profile): 35–65 mm Ksdsv R Nk Uopfx Ah Usdu Edge thickness (coil): 0.4–3 mm Edge thickness (strip material): 0.4–22 mm (depending on unit) Min. workpiece length: 140 mm Min. workpiece width (at length 140 mm): 85 mm Min. workpiece width (at length 250 mm): 50 mm Feed speeds: 10–14–18–20 m/min Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, jointing: 120 mm Glue tank capacity: approx. 3 kg Heating time at half fill level: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return conveyor shown in the images Availability: short-term Location: Flörsheim