Brandt Kdn 210 nakup rabljenega (94)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 50 mm, največja debelina roba: 3 mm, največja hitrost vrtenja: 10.960 obr/min, Oprema: CE označba, Aucun prix de réserve – vente garantie au plus offrant ! DÉTAILS TECHNIQUES Épaisseur maximale du panneau : 50 mm Hauteur minimale du panneau : 8 mm Hauteur maximale du panneau : 50 mm Épaisseur minimale du chant : 0,4 mm Épaisseur maximale du chant : 3 mm Nombre de positions : 1 Unité 1 Unité : Coupe en bout Nombre de moteurs : 2 Engagement automatique temporisé : oui Puissance moteur : 0,18 kW Vitesse : 10 800 tr/min Unité 2 Unité : Fraiseuse de chant Nombre de moteurs : 2 Engagement automatique temporisé : oui Puissance moteur : 0,27 kW Vitesse : 10 960 tr/min Unité 3 Unité : Racleur de chant Système de contrôle : BFS DÉTAILS DE LA MACHINE Puissance totale installée : 4 kW ÉQUIPEMENT Kdjlhcjxw Tugsdw Nog Pression supérieure Pression par rouleaux libres Guide de support de panneau Magasin pour la bobine Système de collage EVA Bac à colle pour colle thermofusible Rail de rouleaux presseurs de chant Nombre de rouleaux presseurs : 3 Marquage CE

Stanje: rabljeno, številka stroja/vozila: 008371, Tip uporabljenega roba: tanek rob, debel rob, masiven les Sistem lepljenja: EVA Multifunkcijska enota: da Največja pomična hitrost: 16 m/min Največja debelina plošče: 60 mm Delovne enote: 7 št. Kolhjx Swfbjcdw Njdg

Stanje: rabljeno, Leto izdelave: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granulate Glue reservoir located underneath the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating directions automatic edge magazine for coil and fixed-length materials Pressure zone with pneumatically driven main pressure roller and special post-pressure rollers for consolidating the upper and lower glue joints Centrally adjustable top pressure Central manual chain conveyor lubrication Operator panel at machine infeed Kjlhoxya Rtecdw Nsdg Cut-off saw unit for front and rear edge overhang; high-precision linear guide 2 motors, each 0.18 kW Swivel range straight and bevel cutting 0-15 degrees Flush trimming unit top and bottom with vertical and horizontal tracing Swivel range 0-15 degrees with 2 milling motors with insert cutter combination straight/radius Digital counters allow quick and defined, i.e. repeatable settings Two-point pneumatic adjustment of upper and lower milling motors Scraper unit for finish processing with horizontal/vertical tracing Workpiece support extendable to 350 mm Integrated tracking control for contactless operation of processing functions. Adjustable via keypad and LED display Workpiece thickness: 8 - 50 mm Edge thickness: 0.4 - 3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3150 mm Availability: short notice Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2006, Used machine Year of manufacture: 2006 Equipment and technical data: - with gluing unit for hot-melt adhesive granulate - Suitable for processing PU glue granulate in compliance with adhesive processing regulations - Glue reservoir located below the glue roller - Glue application to the workpiece via glue roller in both co-rotating and counter-rotating directions - with contact heating shoe for preheating the workpiece - automatic edge magazine for coil material and fixed lengths - pressure zone with pneumatically driven main pressure roller and special post-pressure rollers for compacting the upper and lower glue joint Kdolhjwkbd Escdw Neg - centrally adjustable top pressure - central manual chain lubrication - control panel at machine infeed - End trimming unit: - for front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Swivel range for straight and bevel trimming 0-15 degrees - Flush trimming unit: - top and bottom with vertical and horizontal tracing - Swivel range 0-15 degrees with 2 milling motors with reversible knife combination for straight/radius - Digital counters enable quick and precise, i.e. repeatable settings - Two-point pneumatic adjustment of upper and lower trimming motors - Scraper unit for finishing with horizontal/vertical tracing - Extendable workpiece support up to 350 mm - Integrated track control for contactless control of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8 - 50 mm - Edge thickness: 0.4 - 3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, številka stroja/vozila: 0-261-20-4583, Kantenschleifmaschine BRANDT, Typ O KDN 200 Ambition 1200, gebraucht, Baujahr: 2010 Betriebsdruck: 6 bar Stromversorgung: 400 V – 3 Phasen – 50 Hz Gesamtleistung: 4 kW Werkstückstärke: von 0,3/0,4 bis 8,5 mm Absaugstutzen: 3 x 60 mm Arbeitshöhe: 950 mm Vorschub/Anleimgeschwindigkeit: 10 m/min Coil-Abschneider max.: 0,4 mm – 3,0 x 45 mm Geräuschemissionen dB(A): 84 bis 87 Transport-/Gesamtabmessungen: L 3.450 x B 1.300 x H 2.180 mm Eigengewicht: 1.200 kg Ausstattung: Verleimen, Endabschneiden, Ober- & Unterschneiden, Abkratzen Kslhcdeh Ak D Usw Nsdg Preis: 4.900 € zzgl. MwSt., verhandelbar, FCA: Oradea/Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Englisch. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim romana.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Enota za predhodno rezkanje Postaja za lepilni granulat Pnevmatska giljotina za predrezanje Kslsx I A Dushcdw Nodg Odsesovalna enota z dvema žagama Rezkalna enota s profilnimi rezkarji Profilna strgala Polirke Leto izdelave 2009 Dolžina stroja 3,7 m

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0 - 251 - 20 - 4507, Zaradi prehoda na obdelavo masivnega lesa je bil ta stroj zelo malo rabljen in je v dobrem stanju. Ogled možen v delavnici. Kdslhcoxzp Uwedw Njg

Stanje: rabljeno, used machine Kdjljwwxykjhcdw Nsg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 2.560 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 5.760 mm, višina obdelovanca (maks.): 60 mm, največja debelina roba: 12 mm, vrsta nastavitve višine: električni, višina plošče: 60 mm, Brandt 1650 Highflex with Return Conveyor and PU Glue Box – Top Condition Year of Manufacture: 2010 Operating Hours: 2,587 h Total Edge Length: 216,000 m Maximum Edge Thickness: 12 mm Maximum Panel Thickness: 60 mm Maximum Roll Material Thickness: 3 mm Minimum Workpiece Width: 70 mm Feed Speed Max: 18 m/min Kelhcovnwf Usdw Nsdg Stepless Feed Adjustment Motorized Height Adjustment Adhesive System: Granulate Pre-melting Tank BRANDT Glue System: QUICKMELT KD 2 x PU Glue Pots Strip Magazine Jointing Milling Unit Trimming Saw Unit with 2 Motors Flush/Radius/Chamfering Stations: 1 Corner Copying Unit with 2 Motors Scraper Unit Profile Scraper, Flat Scraper Buffing Unit Synchronized Units NC Axis/ Axes Design: Right-Hand Machine Machine Length: 5,760 mm Conformity Marking: CE Marked Return Conveyor: Ligmatech Boomerang PU Glue Box Machine is still in operation – inspection welcome, available upon arrangement No warranty Collection only, forklift available Net price for edgebander: €26,000 plus VAT Net price for panel return conveyor: €7,000 plus VAT Machines can also be sold separately Price negotiable

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Ta robna lepilka BRANDT Optimat KDF 650 C je bila izdelana leta 2011. Dolžina stroja je 5760 mm, delovna višina 950 mm, zmožna je obdelovati debeline obdelovancev od 8 do 60 mm in debeline robnega materiala od 0,4 do 12 mm. Variabilna podajalna hitrost znaša 8 do 18 m/min. Teža stroja je 2600 kg. Razmislite o možnosti nakupa te robne lepilke BRANDT Optimat KDF 650 C. Za več podrobnosti o tem stroju nas kontaktirajte. Kdolhcdoyaqa Hew Neg Prednosti stroja Tehnične prednosti stroja • Dimenzije stroja (d x š x v): 5760 mm x 1555 mm x 2300 mm / teža (kg): 2600 • Debelina obdelovanca: 8 – 60 mm / debelina robnega materiala: 0,4 – 12 mm / hitrost podajanja: variabilna 8 – 18 m/min (opcijsko 8 – 20 m/min) • Možna preizkusna vožnja / stroj je v dobrem stanju / uporabljal se je le v eni izmeni

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, This BRANDT Optimat KDF 550 was manufactured in 2008. It has a machine length of 5,860 mm, a power requirement of 11.5 kW, and weighs 2,600 kg. With a workpiece thickness of 8 to 60 mm and an edge thickness of 0.4 to 8 mm, it is ideal for precise edge banding operations. Check the availability of this BRANDT Optimat KDF 550 edge banding machine. Contact us for further information. Machine Advantages Kdolhcjyaqagodw Nog Technical Specifications and Machine Benefits • Power requirement: 11.5 kW / weight: 2,600 kg / machine dimensions (LxWxH): 5,860 mm x 1,560 mm x 2,300 mm • Feed speed: 11 m/min (optionally 14 m/min) • Workpiece thickness: 8 – 60 mm / edge thickness: 0.4 – 8 mm / working height: 950 mm • Electrical connection: 400 V – 3 phase – 50 Hz / pneumatic pressure: 6 bar / noise emission level: 80... 87 dB(A) • Extraction diameter: 1 × 120 mm / 2 × 100 mm / roller spacing: max. 3.0 × 45 mm / 0.8 × 65 mm • Inspection possible. The machine is in good condition and was only used in single-shift operation.

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Kdslhsc Tmygecdw Nsg Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: rabljeno, številka stroja/vozila: 008365, Pozicija 1: Enostranski stroj za lepljenje robov BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Kdslhcex Swf Ujdw Nsg Pozicija 2: Povratni transport za plošče BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20

Stanje: rabljeno, številka stroja/vozila: 008367, Tip pritrjenega roba: tanek rob, debel rob, masivni les Lepilni sistem: EVA Spojnično rezkanje: da Multifunkcijska enota: da Maks. hitrost podajanja: 12 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 7 kos Kdelhcdwex Swfhe Nsg

Stanje: rabljeno, številka stroja/vozila: 008363, Tip nameščenega roba: tanek rob, debel rob, masivni les Kdolhcdwex Swdde Njg Sistem lepljenja: PUR Frezanje spoja: da Multifunkcijska enota: da Maks. pospeševalna hitrost: 18 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 7 št.

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 2.500 h, Jednostranná olepovačka hran na opracování rovných hran obrobků a na olepování a následné opracování různých hranových materiálů v podélném i příčném průchodu. PŘEHLED OSAZENÍ AGREGÁTŮ: Přiznávací pravítko – prodloužení o 300 mm s přídavným zařízením pro přesah lamina ZAHLAZOVACÍ FRÉZOVACÍ AGREGÁT 2 x 2,2 kW 200 Hz LEPÍCÍ AGREGÁT A12 s automatickým podáváním hrany – NANÁŠECÍ JEDNOTKA QA 65 N EVA ZKRACOVACÍ AGREGÁT FAZETA/ROVNÝ 2 x 0,35 kW PNEUMATICKÉ NASTAVENÍ ZKRACOVÁNÍ FAZETA/ROVNÝ PNEUMATICKÉ 2-BODOVÉ NASTAVENÍ ZKRACOVÁNÍ Víceetapový frézovací agregát MS40 2 x 0,55 kW s protiběhem a osovým nastavením – PNEUMATICKÉ 2-BODOVÉ NASTAVENÍ kopírovacích válečků (na srovnání na tupo/radius/fazetu) MULTIFUNKČNÍ KOPÍROVACÍ FRÉZOVACÍ AGREGÁT 2 x 0,4 kW Kdslhcdwox S Nc Ee Nog VÍCEETAPOVÝ STÍRACÍ AGREGÁT MZ 40 PNEUMATICKÉ NASTAVENÍ STÍRACÍHO NOŽE STÍRACÍ NŮŽ SPOJOVÉ SPÁRY LEPENÍ LEŠTÍCÍ AGREGÁT AGREGÁT PRO NÁSTŘIK SEPARAČNÍHO PROSTŘEDKU (OBROBEK) Sprejové zařízení na kluzný prostředek AGREGÁT PRO NÁSTŘIK ČISTICÍHO PROSTŘEDKU (OBROBEK) Řídicí systém POWERTOUCH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Single-sided edge banding machine for processing straight workpiece edges, for applying and post-processing various edge materials in both longitudinal and transverse feed. OVERVIEW OF UNIT CONFIGURATION: - Electronic control POWER CONTROL PC 20+ - PU top pressure rollers instead of rubber rollers - Optimization of workpiece gaps - Infeed fence extension by 300 mm with additional device for laminate overhang - JOINTING MILLING UNIT 2 x 2.2 kW 200 Hz - GLUING UNIT A12 with automatic edge feeding – Quickmelt APPLICATION UNIT Kdjlhcdwjx S I Iyj Njg – Standard application unit exchangeable for PU adhesive - Pressure zone with motorized adjustment - END TRIMMING UNIT CHAMFER/STRAIGHT 2 x 0.35 kW - PNEUMATIC ADJUSTMENT FOR END TRIMMING CHAMFER/STRAIGHT - PNEUMATIC 2-POINT ADJUSTMENT FOR END TRIMMING - PRE-MILLING UNIT 2 x 0.55 kW counter-rotating – with PNEUMATIC 2-POINT ADJUSTMENT (Flush and radius/chamfer milling) – Program-controlled adjustment of lateral tracing rollers and edge thickness – stepless – Multiple roller tracing - MULTIFUNCTIONAL PROFILE MILLING UNIT 2 x 0.4 kW with quick-change device and quick-change heads - PROFILE SCRAPING KNIFE WITH QUICK-CHANGE HEADS - Special tracing device for profile scraper - PNEUMATIC ADJUSTMENT FOR SCRAPER - GLUE JOINT SCRAPER - BUFFING UNIT - SEPARATING AGENT SPRAY UNIT WORKPIECE - CLEANING AGENT SPRAY UNIT WORKPIECE

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Okleiniarka BRANDT OPTIMAT KD 68 CF – leto proizvodnje 2001 – tehnička dokumentacija (DTR) TEHNIČKI PODACI: mašina za obradu rubova PVC/ABS debljina trake do 3 mm i drvenih letvica do 9 mm glodač za predglodanje – predglodavanje ploče pritisak trake rezervoar za lepak za topli granulirani lepak, dodatni valjak za nanošenje lepka traka za traku sa grejanjem giljotina – predsecanje trake 3 pritisne rolnice 2 jedinice za završno sečenje sa testerama 2 glodalice za oblikovanje ivica (radijusni glodala) jedinica za izradu uglova (glodalna) jedinice za struganje – uklanjanje viška lepka jedinice za poliranje Kdjlhjhcitrscdw Njg maks. debljina elementa: 50 mm min. širina elementa: 60 mm min. dužina elementa: 160 mm brzina pomaka: 96 m/min ukupna snaga: 10,8 kW prečnik priključka za otprašivanje: 120 mm dimenzije (duž./šir./vis.): 5700 / 1200 / 2100 mm težina: 2000 kg

Stanje: rabljeno, Leto izdelave: 1996, Debelina roba: 0,4 - 12 mm Rob valja: 3 x 45 mm oz. 0,8 - 60 mm Minimalna širina obdelovanca: 65 mm Minimalna dolžina obdelovanca: 160 mm Debelina obdelovanca: 10 - 55 mm Podajanje: 13 m/min Predrezkanje (spajanje) Lepilna kad Quickmelt Lepilni del Obarjanje Poravnalno rezkanje Poševno rezkanje Polmerno rezkanje Kopiranje robov Ravno strgalo Polirni agregat Dimenzije stroja: 7450 x 1220 x 2400 mm Teža: 3000 kg Lokacija skladišča: Nattheim Kdelevvkd Tshcdw Njg

Stanje: rabljeno, Leto izdelave: 2002, Dolžina stroja: 6240 mm Teža: 2400 kg Priključna moč: 14 kW Premer odsesovanja: 120 / 140 mm Lokacija skladišča: Nattheim Kelhcdsvvkfwow Nsdg

Stanje: rabljeno, BRANDT highflex 1440 edge bander Well equipped, Pre-milling units Glue application Pneumatic pre-cut guillotine Pressure rollers Finishing saws Top and bottom milling unit 2 x corner rounding units Profile scraper Flat scraper Polishing unit Kdolhov H D S Socdw Nog The machine features NC-controlled milling units and a pneumatic package Maximum workpiece height: 60 mm Maximum edge thickness (in rolls): 3 mm Feed speed max: 14 m/min The machine is fully operational and can be inspected prior to purchase.

Stanje: rabljeno, številka stroja/vozila: 007517, Type of applied edge: thin edge, thick edge, solid wood Glue application system: EVA, hot air Jointing unit: yes Multifunction unit: yes Kjlhowuz E Rjcdw Njdg Top milling unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 9 pcs

Stanje: rabljeno, Module kit, profile processing unit, cutting unit, milling unit, contour milling unit, joining milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 Kjlhcdwogy Dbhs Nsdg -Motor: 2x Homag Type LF-55L 0.55 kW / 12,000 rpm -Voltage: 220V / 200 Hz -Quantity: 2x milling units available -Price: per piece -Dimensions: 500/350/H570 mm -Weight: 55 kg

Stanje: rabljeno, Modular aggregate kit, format processing unit, cutting unit, milling unit, contour milling unit, jointing milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor for edge banding machine Kelhegy T I Tscdw Nodg -Manufacturer: Homag, cross-cutting unit from edge banding machine BRANDT KM 35 -Motor: Homag Type LF-40-L -Power: 0.27 kW / 12,000 rpm -Voltage: 220V / 200 Hz -Saw blade: Ø 90 mm -Pneumatic components: Bosch -Individual components: see photos -Overall dimensions: 500/370/H680 mm -Weight: 26 kg

Stanje: rabljeno, Modular aggregate system, profile processing unit, cutting unit, milling unit, form milling unit, jointing milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor for edge processing machine, profile holder for edge banding machine. Kjlhcsgy T Nbsdw Nsdg - Manufacturer: Homag, profile holder from BRANDT KM 35 edge banding machine - Individual components: see photos - Overall dimensions: 665/540/H375 mm - Weight: 30 kg