Brandt Ktd 65 nakup rabljenega (89)

Stanje: dober (rabljeno), Leto izdelave: 2006, • Glue pot • Conversion/retrofit was carried out by Hüttenhölscher GmbH in Verl • Area of application: adhesive application unit for handle strips • Vacuum table: included Njdpfx Adjibdyqopjwp • Automatic pressure zone: included

Stanje: dober (rabljeno), Koda: 0134 Znamka: BRANDT - NEMČIJA Model: KTD 53 Avtomatski robilepilni stroj za obdelavo lesa, PVC, furnirja, pohištva, izdelave pohištva po meri ter mizarske dejavnosti in drugo. Tehnični podatki: Minimalna/maksimalna višina obdelovanca: 10/40 mm Debelina robnega traku min/maks: 0,4 - 1,5 mm Hitrost podajanja: 7 m/min na motoriziranem valjčnem transporterju Minimalna širina obdelovanca: 65 mm Sestava: Enota za lepljenje Enota za striženje/odrezovanje traku Enota za čelno odrezovanje Enota za zgornjo/spodnjo obrezovanje Kolesa na podstavku za enostavno premikanje Napetost: 380/50 V Nedpfx Aewq Sc Sjdpewp Skupna moč: 4,5 kW Delovni tlak: 6 bar Dimenzije (DxŠxV): 1800 x 615 x 1170 mm Teža: 280 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, DETAILED PHOTOS AND VIDEO AVAILABLE UPON REQUEST; PLEASE CONTACT ME VIA SMS AND I WILL SEND THEM TO YOU. PLEASE DO NOT MESSAGE VIA OLX—CALL OR EMAIL INSTEAD. Nwedpfx Adsxuu N Hjpop TECHNICAL DATA: Manufacturer: BRANDT Model: KDF 650 Year of manufacture: 2011 Condition: Used, in very good condition Edging thickness: 0.4–3 mm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Maximum edge width: 60 mm Maximum power consumption: 21 kW Dimensions (H × D × L): 2300 × 1550 × 5800 mm Weight: 2600 kg Power supply: [230V/400V] EQUIPMENT: - Electrically controlled infeed fence - Relatively rare automatic edge feeder - Pre-milling unit - Glue application unit - Pressure unit - End trimming unit (for straight or angled cuts) - Edge trimming unit (for excess material) - Corner rounding unit - Profile scraper - Flat scraper - Polishing unit - 3 anti-adhesive fluid spray units TECHNICAL CONDITION: - The machine is fully operational and in continuous use - Regularly serviced by authorized service - Ready for operation - Low hours PRICE: PLN 135,000 net (negotiable); VAT invoice available LOCATION: Bochnia TRANSPORT: Pickup only

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, I am selling a fully equipped edge banding machine BRANDT Optimat KDF 650 C, year of manufacture 2010: Configuration: - Infeed fence manually adjustable - Pre-milling manually adjustable - Edge banding with EVA glue - Pressure zone for material adjustable via servomotor - End trimming saws pneumatically adjustable - Top and bottom radius milling adjustable via servomotor - Corner rounding unit 2-motor, manually adjustable Njdju E E D Dspfx Adpewp - Radius scraper R2 pneumatically retractable - Flat scraper - Polishing brushes - Power Control PC20 operating panel Working height adjustable via servomotor Material height: 8 - 60mm Edge material thickness: 0.4 - 12.0mm Feed speed: 11/14m/min Total length including feed table: 5860mm Total weight: 2600kg 2 additional glue pots included Comes with complete documentation and CE certificate. Very good condition, fully functional!

Stanje: rabljeno, Leto izdelave: 2012, Control: POWER CONTROL PC 20+ Panel height (mm): 60 PVC-ABS edge thickness (mm): 3 Solid edge thickness (mm): 12 Feed speed (m/min): 20 Upper motor-driven rubberized belt Manual infeed guide Anti-adhesive unit Njdpfswwk Duex Adpswp Straightening unit Bonding with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset end trimming and corner rounding unit with two motors Linear 2-motor rounding unit Edge scraper blade Glue scraper blade Buffing unit

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Orodja Največja dolžina orodja: 5760 mm Dodatna oprema Enota za spajanje: 2 x 2,2 kW 200 Hz Leplilni agregat: A12 Odsnemalna enota: posnetje/ravnost 2 x 0,35 kW Nwodpfx Asxfw A Rsdpop Pnevmatska nastavitev za poševne/ravne prečne reze Pnevmatska dotočkovna nastavitev za prečne reze Predrezalna enota: 2 x 0,55 kW, 0 stopinj Pnevmatska dotočkovna nastavitev Multifunkcijska oblikovalna enota: 2 x 0, 4 kW Profilni strgalnik z hitro menjavo glav Pnevmatska nastavitev strgalne lopatice Ta robilni stroj BRANDT KDF 650 Highflex 1650 je bil izdelan leta 2013. Primeren je za natančna robilna dela in zagotavlja zanesljivo delovanje za strokovnjake v lesni industriji. Izkoristite priložnost za nakup robilnega stroja BRANDT KDF 650 Highflex 1650. Za več informacij nas kontaktirajte. Vrste uporabe Robljenje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 2.560 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 5.760 mm, višina obdelovanca (maks.): 60 mm, največja debelina roba: 12 mm, vrsta nastavitve višine: električni, višina plošče: 60 mm, Brandt 1650 Highflex s vratným dopravníkem a PU lepicí kazetou, ve špičkovém stavu Rok výroby: 2010 Provozní hodiny: 2 560 h Celková délka hran: 211 844 m Max. tloušťka hrany: 12 mm Max. tloušťka desky: 60 mm Max. tloušťka páskového materiálu: 3 mm Min. šířka obrobku: 70 mm Max. posuv: 18 m/min Plynulé nastavení posuvu Motorické nastavení výšky Lepicí systém: granulát Předtavovací zásobník BRANDT lepicí systém QUICKMELT KD 2x PU lepicí vany Zásobník na pásky Kolečko na spojování hran Cirkulární pila s 2 motory Jednotka pro zarovnání/radius/fazetu: 1 Jednotka pro kopírování rohů se 2 motory Stírací jednotka Profilová stěrka, plochá stěrka Lestící jednotka Jednotky v taktovaném režimu NC osa/osy Provedení: pravostranný stroj Délka stroje: 5 760 mm Značení shody CE Vratný dopravník Ligmatech Boomerang PU lepicí kazeta Stále v provozu, prohlídka vítána, k dispozici po dohodě Bez záruky Pouze osobní odběr, vysokozdvižný vozík k dispozici Cena bez DPH Cena dohodou Nedovnwf Uopfx Adpjwp

Stanje: rabljeno, Leto izdelave: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power requirement: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction capacity: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double upper pressure for workpiece stability Electronic thickness control Feed frequency inverter Automatic lubrication of the feed chain Automatic motor calibration Touchscreen control system Emulsion spraying at infeed and outfeed Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with interchangeable knives Motorised cutting depth adjustment Gluing unit Application of glue as well as hot air Heated application roller Quick-change complete unit Automatic positioning via motor 3 pressure rollers Edgebanding speed: 14 m/min End trimming unit Dual-motor unit with automatic tilting Tilting up to 15° THK prism guides Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Nsdpsv Szt Defx Adpewp Copying unit (2 motors) Automatic tool position change with servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Stanje: rabljeno, številka stroja/vozila: 007834, Tip pritrjene obrobe: tanka obroba, debela obroba, masiven les Sistem lepljenja: EVA, vroč zrak Spojno rezkanje: da Večnamenska enota: da Maks. podajalna hitrost: 18 m/min Njdpfev Sf I Eex Adpewp Maksimalna debelina plošče: 60 mm Delovne enote: 8 št.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2017, REGENERATED SINGLE-SIDED EDGE BANDER BRANDT Nodpfx Adsphnzajpowp MODEL: AMBITION 1650 FC Machine fully regenerated New feed blocks, new rollers, overhauled units, complete set of new tools, overhauled glue pot, and much more SPECIFICATION, EQUIPMENT, DEVICE FEATURES: JOINTING UNIT 2 X 2.2 KW 200 HZ GLUING UNIT A12 CROSS CUTTING UNIT BEVEL/STRAIGHT 2 X 0.35 KW COUNTER-ROTATING MILLING UNIT 2 X 0.55 KW FORMING UNIT 2 X 0.35 KW WD 60 PROFILE SCRAPER WITH QUICK-CHANGE HEADS, FREE SPACE GLUE LINE SCRAPER POLISHER - Feed speed: 8 – 18 m/min - Max feed speed with contour cutter: 11 m/min - Max feed speed with forming cutter (in combination with VKNR 4839): 14 m/min - Working height: 950 mm - Pneumatic connection: min. 6 bar - Total length: 5,760 mm

Stanje: rabljeno, Modular aggregate system, profile processing unit, cutting unit, milling unit, form milling unit, jointing milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor for edge processing machine, profile holder for edge banding machine. - Manufacturer: Homag, profile holder from BRANDT KM 35 edge banding machine Nodpfxsgy T Nbs Adpjwp - Individual components: see photos - Overall dimensions: 665/540/H375 mm - Weight: 30 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Ta robna nalepilica BRANDT Optimat KDF 650 C je bila izdelana leta 2011. Značilnosti vključujejo dolžino stroja 5760 mm, delovno višino 950 mm ter zmogljivost obdelave obdelovancev debeline od 8 do 60 mm in robnih materialov debeline od 0,4 do 12 mm. Hitrost podajanja je nastavljiva v razponu od 8 do 18 m/min. Teža stroja znaša 2600 kg. Izkoristite priložnost za nakup te robne nalepilke BRANDT Optimat KDF 650 C. Za dodatne informacije o stroju nas kontaktirajte. Področje uporabe: Lepljenje robov Nsdsw Uakqspfx Adpjwp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 50 mm, največja debelina roba: 3 mm, največja hitrost vrtenja: 10.960 obr/min, Oprema: CE označba, Aucun prix de réserve – vente garantie au plus offrant ! DÉTAILS TECHNIQUES Épaisseur maximale du panneau : 50 mm Hauteur minimale du panneau : 8 mm Hauteur maximale du panneau : 50 mm Épaisseur minimale du chant : 0,4 mm Épaisseur maximale du chant : 3 mm Nombre de positions : 1 Unité 1 Unité : Coupe en bout Nombre de moteurs : 2 Engagement automatique temporisé : oui Puissance moteur : 0,18 kW Vitesse : 10 800 tr/min Unité 2 Unité : Fraiseuse de chant Nombre de moteurs : 2 Engagement automatique temporisé : oui Puissance moteur : 0,27 kW Vitesse : 10 960 tr/min Unité 3 Unité : Racleur de chant Système de contrôle : BFS DÉTAILS DE LA MACHINE Puissance totale installée : 4 kW ÉQUIPEMENT Pression supérieure Pression par rouleaux libres Guide de support de panneau Magasin pour la bobine Système de collage EVA Bac à colle pour colle thermofusible Nwedjxw Tugopfx Adpsp Rail de rouleaux presseurs de chant Nombre de rouleaux presseurs : 3 Marquage CE

Stanje: rabljeno, Leto izdelave: 1996, Debelina roba: 0,4 - 12 mm Rob valja: 3 x 45 mm oz. 0,8 - 60 mm Minimalna širina obdelovanca: 65 mm Minimalna dolžina obdelovanca: 160 mm Debelina obdelovanca: 10 - 55 mm Podajanje: 13 m/min Predrezkanje (spajanje) Lepilna kad Quickmelt Lepilni del Obarjanje Poravnalno rezkanje Poševno rezkanje Polmerno rezkanje Kopiranje robov Ravno strgalo Polirni agregat Dimenzije stroja: 7450 x 1220 x 2400 mm Teža: 3000 kg Lokacija skladišča: Nattheim Nsdpfx Adsvvkd Tjpswp

Stanje: rabljeno, Leto izdelave: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granulate Glue reservoir located underneath the glue roller Njdpfx Adexya Rtspjwp Glue application to the workpiece via glue roller in both co-rotating and counter-rotating directions automatic edge magazine for coil and fixed-length materials Pressure zone with pneumatically driven main pressure roller and special post-pressure rollers for consolidating the upper and lower glue joints Centrally adjustable top pressure Central manual chain conveyor lubrication Operator panel at machine infeed Cut-off saw unit for front and rear edge overhang; high-precision linear guide 2 motors, each 0.18 kW Swivel range straight and bevel cutting 0-15 degrees Flush trimming unit top and bottom with vertical and horizontal tracing Swivel range 0-15 degrees with 2 milling motors with insert cutter combination straight/radius Digital counters allow quick and defined, i.e. repeatable settings Two-point pneumatic adjustment of upper and lower milling motors Scraper unit for finish processing with horizontal/vertical tracing Workpiece support extendable to 350 mm Integrated tracking control for contactless operation of processing functions. Adjustable via keypad and LED display Workpiece thickness: 8 - 50 mm Edge thickness: 0.4 - 3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3150 mm Availability: short notice Location: Flörsheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Edge banding machine Brandt KDF 530 C with jointing, corner copying, two scraper blades, and Riepe spray units. A video of the machine in operation can be supplied upon request. The machine is highly automated. Edge thickness: approx. 0.4 – 8 mm Workpiece height: approx. 10 – 50 mm Feed rate: approx. 11 m/min Noise protection enclosure Extendable workpiece support Extraction ports: 1x200 mm, 1x100 mm, including depicted ductwork PC16 control with color display for easy machine operation Units/Features: - Pressure beam manually adjustable with SIKO counter - Infeed fence manual adjustment with SIKO counter - Riepe separator agent spray unit - Jointing cutterheads with Leitz Whispercut diamond tools, resharpened - Gluing unit switchable for with- or against-the-grain feed - Pressure zone with 3 rollers - End trimming saw with 2 motors, for straight or beveled cutting (programmable adjustment) - Combination milling unit with motorized lateral adjustment - Radius scraper blade R2, pneumatically adjustable - Corner rounding unit R2 with 1 motorized diamond cutter, pneumatically adjustable for thin/thick edge - Glue joint scraper blade, pneumatically retractable with large roller - Riepe cleaning agent spray unit Nwedpfxsxd Dudj Adpop - Buffing unit Other equipment: - Hood lock - CE marking - User manual in binder and on CD All reversible knives of the milling units and scraper blades have been replaced or rotated, saws sharpened, jointing cutterheads resharpened, buffing discs replaced. The machine is therefore ready for immediate use. Only the diamond cutter of the profile milling unit has not been replaced but is still sharp. Minor paint damage touched up. Approx. 3500 operating hours. The condition of the machine speaks for itself. Occasionally, the PC restarts while the machine operates (mainly at higher ambient temperatures); this has not posed any problems for us, and work can continue during the restart. Machine dimensions approx. 4800 x 1200 x 1800 mm (LxWxH) Weight approx. 1900 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are demonstration-ready and available in our warehouse – see “more offers from this provider.”

Stanje: delavnici obnovljeno (rabljeno), Regenerirani robni lepilni stroj BRANDT AMBITION 1440 Nwodpfow S E Rqsx Adpep

Stanje: rabljeno, Leto izdelave: 2011, Tip KDF 220 C Leto izdelave: 2011 Nsdpoxc N Hvefx Adpswp Enota krmiljena preko zaslona Enota za nanašanje lepila Kapična žaga Poravnalna rezkalna enota Kotni kopirni agregat Radijsko strgalo Površinsko strgalo Debelina robnega traku: 0,4 - 3 mm Debelina obdelovanca: 8-50 mm Podajalna hitrost: 10 m/min Skupna moč: 9,5 kW Dolžina: 4150 mm Teža: 1150 kg Cena: 19.990 € vključno z DDV, izkazan na računu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 11 m/min, višina obdelovanca (maks.): 40 mm, največja debelina roba: 6 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: CE označba, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Minimum panel height: 8 mm Maximum panel height: 40 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 6 mm Max. rotational speed: 12,000 rpm MACHINE DETAILS Trimming unit Unit: Format trimming Unit: Corrections automatic engagement by timer Nodpfxsxw Ttvs Adpowp Motor power: 2.2 kW Edge preheating lamps Coil magazine No. of spool positions: 1 Gluing system Glue pot for hot-melt adhesive Edge pressure roller section No. of pressure rollers: 3 Edge processing unit 1 Unit: End trimming Number of motors: 2 automatic engagement by timer Motor power: 0.18 kW Max. rotational speed: 12,000 rpm Edge processing unit 2 Unit: Top and bottom trimming Number of motors: 2 Motor power: 0.27 kW Max. rotational speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Max. rotational speed: 12,000 rpm Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT PC 16 control system CE marking

Stanje: rabljeno, Leto izdelave: 2002, Dolžina stroja: 6240 mm Teža: 2400 kg Priključna moč: 14 kW Premer odsesovanja: 120 / 140 mm Lokacija skladišča: Nattheim Nwsdpfx Ajvvkfwjdpsp

Stanje: rabljeno, Leto izdelave: 2014, Used Machine Single-Side Edge Banding Machine Brandt Optimat KDF 220 C (Ambition 1220 FC) Nsdpfjxx D D Uex Adpowp Year of manufacture: 2014 Machine number: 0-261-20-7913 Fixed fence on right side Manual infeed guide adjustment Feed speed: 11 m/min Max. feed speed with contour trimming unit: 11 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Workpiece and edging parameters: Minimum workpiece width: with workpiece thickness 8-22 mm: 70 mm with workpiece thickness 23-60 mm: 120 mm Workpiece overhang: 38 mm Workpiece thickness: 8 - 60 mm Max. edge height = workpiece height + 5 mm Edge material in rolls: 0.4 - 3 mm Max. edge cross-section: for PVC: 135 mm² for veneer: 100 mm² Max. roll diameter: 830 mm Edge material in strips: 0.4 - 3 mm Max. edge cross-section: for strips: 165 mm² Edge thickness up to 6 mm possible by adjusting pressure zone Aggregate configuration: Jointing milling unit 2 x 2.2 kW 200 HZ (synchro and counter rotation) Gluing unit A3 with workpiece pre-heating End trimming unit, chamfer/straight 2 x 0.18 kW Milling unit 2 x 0.27 kW in counter-rotation Contour trimming unit (corner rounding) 1 x 0.35 kW WD 40 Profile scraper with quick-change heads Glue joint scraper 5820 Control: Easytouch Dimensions: approx. 4280 x 1300 x 1170 mm Weight: approx. 1400 kg Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 3.084 h, skupna dolžina: 5.500 mm, skupna višina: 1.650 mm, skupna širina: 850 mm, - Machine available from: 2025-11-26 - Special features: - └ Description: Includes roller tables, without enclosure. - Year of manufacture: 2010 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Operating hours: 3084 - Number of units [pcs]: 9 - └ 1st unit type: Milling unit - └ 2nd unit type: Gluing unit - └ 3rd unit type: Cross-cut unit - └ 4th unit type: Pre-milling unit - └ 5th unit type: Milling unit - └ 6th unit type: Radius scraper unit - └ 7th unit type: Grooving unit - └ 8th unit type: Pre-heating unit - - Tools included: No - └ 9th unit type: Brushing unit - Min. edge banding thickness [mm]: 0.4 - Max. edge banding thickness [mm]: 8 - Min. panel thickness [mm]: 8 Nwodpfoxyx U Rsx Adpop - Max. panel thickness [mm]: 60 - Min. feed speed [m/min]: 8 - Max. feed speed [m/min]: 14 - Options: Return conveyor - Voltage [V]: 230 - Current consumption [A]: 23 - Fuse [A]: 25 - Transport dimensions: 5500mm x 850mm x 1650mm (L x W x H) - Transport packages [pcs]: 5 Financial information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 11 m/min, največja debelina roba: 3 mm, višina plošče: 60 mm, največja hitrost vrtenja: 12.000 obr/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 60 mm Min. panel height: 8 mm Max. panel height: 60 mm Min. panel width: 70 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm Number of working units: 5 Max. spindle speed: 12,000 rpm MACHINE DETAILS Unit: Sizing/trimming Unit: Correction Automatic timed engagement: yes Motor power: 2.2 kW Edge preheating lamps Coil magazine Number of positions: 1 Gluing system Hot-melt glue pot Hot-melt pre-fuser Edge pressure roller conveyor Nedpfxjxw Tnge Adpjwp Number of pressure rollers: 3 With NC positioning Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Max. processing speed: 11 m/min Motor power: 0.18 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Edge trimming Number of motors: 2 With NC positioning Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Edge scraper Edge Processing Unit 4 Unit: Glue scraper Installed total power: 13 kW EQUIPMENT Control system EASY CONTROL EC 10+ CE marking

Stanje: rabljeno, Leto izdelave: 2006, Used machine Year of manufacture: 2006 Equipment and technical data: - with gluing unit for hot-melt adhesive granulate - Suitable for processing PU glue granulate in compliance with adhesive processing regulations - Glue reservoir located below the glue roller - Glue application to the workpiece via glue roller in both co-rotating and counter-rotating directions - with contact heating shoe for preheating the workpiece - automatic edge magazine for coil material and fixed lengths - pressure zone with pneumatically driven main pressure roller and special post-pressure rollers for compacting the upper and lower glue joint - centrally adjustable top pressure - central manual chain lubrication Nwjdpfx Adowkbd Ejpep - control panel at machine infeed - End trimming unit: - for front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Swivel range for straight and bevel trimming 0-15 degrees - Flush trimming unit: - top and bottom with vertical and horizontal tracing - Swivel range 0-15 degrees with 2 milling motors with reversible knife combination for straight/radius - Digital counters enable quick and precise, i.e. repeatable settings - Two-point pneumatic adjustment of upper and lower trimming motors - Scraper unit for finishing with horizontal/vertical tracing - Extendable workpiece support up to 350 mm - Integrated track control for contactless control of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8 - 50 mm - Edge thickness: 0.4 - 3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Stanje: rabljeno, številka stroja/vozila: 007517, Type of applied edge: thin edge, thick edge, solid wood Glue application system: EVA, hot air Jointing unit: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Nodpswuz E Rofx Adpewp Working units: 9 pcs