Hebrock Akv 83 nakup rabljenega (43)

Stanje: rabljeno, Leto izdelave: 1994, for pre-glued edges including a large quantity of edge material with double-sided cantilever end cap station 3-roller feed Lrodpjvwfzvofx Ahujn used, in good condition Make: Hebrock Model: AKV-83 Year of manufacture: 1994 Edging thickness: 1.0 mm Max. workpiece height: 50 mm Min. workpiece width: 50 mm Min. workpiece length: 170 mm Space requirement: approx. 1700 mm x 690 mm x 500 mm Location: 97447 Gerolzhofen, free loaded on truck, unpacked Handover in as-inspected condition without warranty or guarantee

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Marke: Hebrock Modell: AKV 83 F Baujahr: 2004 Maschinennummer: 10759 Lredou Racxopfx Ahuon Technische Daten: Werkstückdicke: 10 - 50 mm Vorschubgeschwindigkeit: 3 - 4 m/min Elektrischer Anschluss: 220/380 Volt, 50 Hz Leistung: 3 kW Abmessungen (komplett): 1750 x 800 x 1250 mm Gewicht: ca. 95 kg Heizung: 3 kW, mit stufenloser elektronischer Temperaturregelung, 0 - 650 °C Motor: 3,5 kW Lager-Nr.: 2002311BXA

Stanje: zelo dobro (rabljeno), Catalog number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (including one rubber, three metal) - End trimming unit with saws (front/rear) - 2 top/bottom edge trimming units with radiused cutters - 2 scrapers – for removing excess glue, radiused top/bottom - Corner rounding unit - Flat scrapers top/bottom - 2 polishers Lsdpsy Id Nlsfx Ahuern - Max feed speed: 10 m/min - Min. workpiece length: 260 mm - Min. workpiece width: 90 mm - Workpiece thickness: 10–60 mm - Edgebanding tape thickness: 0.5–3 mm - Extendable workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (L/W/H): 5000 x 1520 x 1600 mm - Weight: 1,295 kg ADVANTAGES – Not repainted – Pre-milling, corner rounding – Control panel with quick selection of preset work programs – Made in Germany – DTR documentation – Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) – Very good condition – Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR exchange rate (Prices may change due to larger fluctuations)

Stanje: rabljeno, Leto izdelave: 2014, moč: 12 kW (16,32 KM), največja debelina roba: 8 mm, hitrost pomika os X: 10 m/min, višina plošče: 40 mm, Oprema: CE označba, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNI PODATKI Maks. podajalna hitrost: 10 m/min Maks. višina obdelovanca: 40 mm Min. dolžina obdelovanca: 200 mm Min. širina obdelovanca: 80 mm Min. debelina roba: 0,3 mm Maks. debelina roba: 8 mm Število obdelovalnih agregatov: 5 Število enot za razrez plošč/rezkanje: 1 Število robnih obdelovalnih enot: 4 Sistem lepljenja: EVA talilno lepilo Stroj je sestavljen iz naslednjih obdelovalnih enot: Enota za razrez plošč/rezkanje Agregat: predrezkalni agregat Robna obdelovalna enota 1 Obdelovalna funkcija: kapiranje Število motorjev: 1 Robna obdelovalna enota 2 Obdelovalna funkcija: fino rezkanje za poravnavo in zaokroževanje Število motorjev: 2 Robna obdelovalna enota 3 Obdelovalna funkcija: zaokroževanje vogalov Število motorjev: 1 Robna obdelovalna enota 4 Obdelovalna funkcija: strgalo za lepilo PODATKI O STROJU Skupna priključna moč: 12 kW OPREMA CE označba Zgornji pritisni sistem Pritisne valjčke z prostim tekom Prilagodljive vodila za plošče Magazin za robne trakove Lepilni lonec za EVA talilno lepilo Vhodni valj za pritiskanje roba 4 pritisni valjčki Agregat za zaokroževanje vogalov Lrodezf Id Sspfx Ahusn Stroj se prodaja in dobavi v dejanskem tehničnem in pravnem stanju ("videno-kupljeno") na podlagi fotodokumentacije in opisne tehnične/komercialne dokumentacije. Kupec ima pravico blago pred prevzemom pregledati, ter prevzema odgovornost za vgradnjo, zavarovanje in uporabo stroja na kraju namestitve. Zunanja referenca: 8570

Stanje: rabljeno, Leto izdelave: 1992, Rabljeni stroj Leto izdelave: 1992 maks. višina obdelovanca pribl. 40 mm min. dolžina obdelovanca pribl. 250 mm min. širina obdelovanca pribl. 70 mm Podajalna hitrost pribl. 11 m/min Pripravljen za obratovanje v pribl. 4-5 min Poraba moči pribl. 11 kW s hitrogrelno posodo za lepilo Pnevmatski odrez rol do 3 mm z čelilno žago do 5 mm debeline robnega traku z rezkalno postajo, po želji opremljeno s kombiniranimi rezkalniki z izmenljivimi ploščicami za radiusno, ravno in posneto rezkanje Konzolni nosilec, zložljiv in izvlečen na sprednjo stran s podvozjem D x Š x V: 3600 x 1400 x 1200 mm Teža pribl. 670 kg Razpoložljivost: takoj Lokacija: Flörsheim Lodpfsx Rr Dvjx Ahujrn

Stanje: rabljeno, Leto izdelave: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Milling Unit including DIA Tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combi-milling station for radius R 2.5 mm. Technical Description: - Hotmelt adhesive application to workpiece for edge materials up to 3 mm - Maximum workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combi version) and fine adjustment accessible from operator side - Spare slots for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged operator panel - Double roller upper pressure beam - Aggregate viewing window from both rear and operator side of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Special Equipment: Airtronic incl. cooling and antistatic spray unit (2014) 1 pc. hot air unit for achieving optical zero joint with special edging materials - Including pneumatic glue pot positioning - Including cooling and antistatic spray unit - Including 2 additional quick-change edge channels - Including special corner rounding milling unit (max. workpiece thickness: 60 mm, min. length: 200 mm) - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible (extra cost on request) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min Upgrade for 8 mm edge thickness 1 pc. for max. 40 mm workpiece thickness Including pneumatic saw adjustment (special design) Minimum workpiece thickness: 8 mm 3-point pneumatic milling cutter adjustment Switching radius – chamfer – flush for combi milling stations, eliminating manual adjustment at the combi milling station for the 3rd reference point. PLC control mandatory. Lsdpfxex S Hmze Ahusrn Buffing station (polishing) 1 pc. corner rounding milling unit incl. combi tool and pneumatic adjustment for chamfer/radius (max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm) Radius scraper 1 pc. incl. pneumatic lifting device (radius R 2.0 mm) Flat scraper 1 pc. with pneumatic activation Full chassis 1 pc. Glue station change system incl. glue drain device prepared for discharge below (1 pc), without second glue pot; includes possibility to work with PU adhesive Grooving saw unit vertical into panel 1 pc. incl. pneumatic lifting device - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from panel edge: 14.0 mm Special grooving saw motor with higher power 1 pc. Extraction for jointing unit, internal, on the extraction manifold of the machine Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Protective agent spray system 1 pc. for edge surface – for sensitive edge materials Combined spray system for panels: separating and cleaning agent spray (1 pc) Storage location: Supplier

Stanje: rabljeno, Leto izdelave: 1991, Rabljeni stroj Leto izdelave: 1991 maks. višina obdelovanca približno 40 mm min. dolžina obdelovanca približno 250 mm min. širina obdelovanca približno 70 mm Pomik približno 11 m/min. Pripravljen za obratovanje v približno 4-5 min. Poraba energije približno 11 kW Z ogrevanim vstopnim ravnilom S hitro grelnim lepilnim rezervoarjem Pnevmatsko kapiranje robov do 3 mm Lrjdpfx Ahjwka Tleuon S kapirno žago za debelino roba do 5 mm Z rezkalno postajo po želji opremljeno s kombiniranimi rezkarji z izmenljivimi ploščicami za radiusno, ravno in posneto rezkanje Konzola, zložljiva in izvlečna proti sprednji strani S podvozjem Z integriranim odsesavanjem D x Š x V 3600 x 1400 x 1200 mm Teža približno 670 kg Razpoložljivost: kratkoročno Lokacija: Flörsheim

Stanje: rabljeno, Leto izdelave: 2011, pnevmatska nastavitev rezkarja (ravno/radij) Kombinirana rezkarska postaja R=2 Rezkar zaokroževanja robov R= 2 do 40 mm Spojni rezkar do 40 mm Ravno strgalo Profilno strgalo R = 2 Kratki obdelovanci SPS krmiljenje z zaslonom na dotik Pro Face Gnezdenje Hlajenje/antistatično pršenje - airtronic Zaščitno pršenje roba Riepe z vključenim zamenljivim rezervoarjem Debelina obdelovanca 8 - 60 mm Mehanska pritrditev roba Odvzemna odprtina: 140 mm Dimenzije: Dolžina z izpostavo: 4984 mm Globina z valjčno mizo: 1425 mm Največja višina: 1618 mm Višina delovne mize: 888 mm Teža: 1400 kg Lokacija skladišča: Nattheim Ljdsxyiilspfx Ahuorn

Stanje: rabljeno, Leto izdelave: 2000, skupna višina: 1.600 mm, skupna dolžina: 4.300 mm, skupna širina: 840 mm, Color: Grey - Year of manufacture: 2000 - Documentation available: No - CE certificate available: No - Serial number: 404 - Number of units: 6 - 1st Unit Type: - Tools included: Yes - 3rd Unit Type: - Tools included: Yes - 4th Unit Type: - Tools included: Yes - 5th Unit Type: Lrjdpfx Ahjykafasuen - Tools included: Yes - 6th Unit Type: - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 15.8 - Power [kW]: 10.2 - Transport dimensions: 4300mm x 840mm x 1600mm (L x W x H) - Number of shipping units: 1 Financial information VAT: The stated price is exclusive of VAT VAT margin scheme: VAT is deductible for businesses Delivery and trade-in possible at any time for all items in the industrial sector Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2012, skupna višina: 1.600 mm, skupna dolžina: 5.250 mm, skupna širina: 1.440 mm, Machine à placage de chants HEBROCK AKV 3006 DK FS Épaisseur de chant maximale : 3/8 mm Épaisseur minimale/maximale de la pièce : 10/40 mm Longueur minimale de la pièce : env. 200 mm Largeur minimale de la pièce : env. 80 mm Vitesse d'avance : env. 10 m/min Lrjdpfx Ahswnhb Sjuon Prête en env. 6 minutes. Puissance maximale absorbée : 12 kW Raccordement électrique : 400 V / 3 Ph / 50 Hz Pré-fraisage Unité d’encollage Rouleau de pression Scie à recouper Unité de fraisage Unité de fraisage Arrondisseur d’angles Racloir à rayon Racloir plat Unité de nettoyage Dimensions (L x l x h) : 5250 x 1445 x 1600 mm, Poids : 1550 kg - Année de construction : 2012 - Documentation disponible : Non - Certificat CE disponible : Non - Dimensions de transport : 5250mm x 1445mm x 1600mm (L x l x h) Informations financières : TVA : Le prix indiqué s'entend hors TVA TVA/régime de la marge : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement industriel Yorick Diebels

Stanje: dober (rabljeno), Leto izdelave: 2005, Znamka: Hebrock Model: AKV 88 D Št. stroja: 569-P3 Letnik: 2005 Tehnični podatki: Ledpfoq Ihxpsx Ahujrn Maksimalna debelina robnega traku: pribl. 3 mm Maksimalna delovna višina: 50 mm Minimalni notranji radij: pribl. 8 mm Hitrost podajanja: 0–7 m/min Čas segrevanja: pribl. 6,5 min Motor: 9,3 kW, 50 Hz, 400 V Dimenzije stroja (d × š × v): 1360 × 690 × 1220 mm Teža: pribl. 150 kg Zaloga št.: 2001921BXA

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 1386, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 31 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 50 mm, največja debelina roba: 8 mm, vrsta nastavitve višine: mehanski, leto zadnje generalne obnove: 2025, Hebrock Edgebander AKV 3003 DK F Edgebanding machine with hot-melt adhesive application directly to the workpiece For edge material up to 8 mm and jointer milling including DIA tooling - Ergonomically arranged control panel - Easy adjustment from the operator side (digital displays) - Maintenance-free quick-heating glue pot - Robust chain drive - High-frequency cross-cut saw (300 Hz) - High-frequency flush trimming station, including tool set-up and fine adjustment from the operator side - Automatic edge feed - Protective and sound-insulating hood - Extendable workpiece support - Electronic temperature control - Pneumatic end trimming unit for up to max. 3 mm edge thickness and 60 mm edge height - Double upper pressure rollers - Signal lamp for workpiece feed - Aggregates inspection window (machine rear and operator side) - Safety standard according to CE Complete with: - Surface scraper unit Ljdpfxjyud Sfe Ahusrn - Corner rounding unit - 8 mm edge thickness Workpiece height approx. 10 – 40 mm, Feed rate approx. 10 m/min, Power supply 11 kW (31 A) 400 Volt, 50 Hz, Length approx. 4300 mm Weight approx. 1250 kg Offered "as is" As inspected, ex location Seevetal, without freight and packaging, Subject to prior sale.

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Rabljeni stroj GM020.0068 AKV 3003 DK - F Leto izdelave: 2007 Izvedba: 3 mm 1. rezkalna postaja: Kombinirana Površinski vlečni strgalnik z izkopom Podvozje Pnevmatska nastavitev rezkanja Ročica končnega stikala, naklon 7,5° Ljdpfx Ahsw Nih Ijuorn

Stanje: dober (rabljeno), Leto izdelave: 2002, I am selling a HEBROCK AKV 088D edge banding machine for shaped parts. Year of manufacture: 2002. Suitable for curved components. Lrsdsvx D Auepfx Ahusn Good condition, inspection possible! It is also possible to additionally purchase the HFF08 radius milling unit.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 10 m/min, največja hitrost vretena: 16.000 obr/min, vrsta upravljanja: Krmiljeno s PLC krmilnikom, The machine has already been dismantled and stored by a professional. TECHNICAL DETAILS Speed of crosscut saw station: approx. 16,000 rpm Speed of milling station: approx. 16,000 rpm Max. milling depth: 3 mm Edge thickness capability: 1 mm Maximum hot-melt adhesive specification for edge material: 3 mm Feed speed: approx. 10 m/min Max. workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue pot with quick-change basin pre-equipment Glue discharge device Pneumatic milling adjustment Combination unit with replaceable insert cutters Corner rounding unit Lrjdpfx Ahjzb Idfeuen Radius scraper Surface scraper with pneumatic lift device Buffing station Heavy-duty chain drive Ball-bearing double roller top pressure Aggregate viewing window from machine rear and operator side Signal lamp for workpiece sequence Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling unit Hebrock jointing up to 60 mm workpiece thickness Hebrock edge protection spray Hebrock nesting (milling unit + radius scraper) Hebrock Airtronic Note: Accessories are supplied without guarantee. Applies: "Item purchased as seen." Buyers are responsible for verifying completeness of the item on site.

Stanje: rabljeno, Leto izdelave: 2020, moč: 6 kW (8,16 KM), višina obdelovanca (maks.): 50 mm, največja debelina roba: 3 mm, Oprema: CE označba, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNE PODROBNOSTI Minimalna višina plošče: 8 mm Maksimalna višina plošče: 50 mm Lrodpfx Ahozf Irceuen Minimalna debelina robnega traku: 0,3 mm Maksimalna debelina robnega traku: 3 mm Lepljenje: EVA talilno lepilo Stroj je sestavljen iz 4 obdelovalnih enot: Enota 1 Predrezalna enota Število pritisnih valjev: 3 Lepilni lonec za EVA talilno lepilo Enota 2 Enota za obdelavo robov: krajšanje Število motorjev: 1 Enota 3 Enota za obdelavo robov: fino rezkanje za poravnano rezkanje in zaokroževanje Število motorjev: 2 Enota 4 Obdelovalna enota: lepilni strgalnik PODROBNOSTI O STROJU Skupna instalirana moč: 6 kW Stroj se prodaja in dostavi v dejanskem pravnem stanju („kot videno in sprejeto") na podlagi fotodokumentacije ter tehnične/komercialne dokumentacije z opisnim značajem. Kupec ima pravico pregledati blago pred prevzemom ter prevzema odgovornost za namestitev, varovanje in uporabo stroja na namembni lokaciji. Zunanja referenca: 8571

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, številka stroja/vozila: 3074, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 32 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, največja debelina roba: 3 mm, vrsta nastavitve višine: mehanski, skupna višina: 1.618 mm, skupna dolžina: 4.984 mm, skupna širina: 1.425 mm, skupna masa: 1.400 kg, leto zadnje generalne obnove: 2025, premer povezave za izpihovanje: 140 mm, premer ekstrakcijske šobe: 140 mm, hitrost podajanja osi Y: 10 m/min, delovna višina: 888 mm, For sale due to the purchase of a new machine: our reliable edge banding machine, bought new in 2016. The machine operated in an 8-person carpentry workshop. It underwent a complete refurbishment in January 2025, which included new radius scrapers, new milling tools, and new polishing discs. The pre-milling unit was sharpened; the glue roller clutch was replaced. The glue tank was fully refurbished and cleaned. The machine is suitable for both EVA granulate (e.g. Henkel Dorus KS351) and PUR adhesive applications. The pre-milling amount, edge banding material thickness, and upper/lower milling tool positions can be conveniently adjusted from outside the machine housing using handwheels. The control system allows you to save custom edge banding programs. For 0.4 mm and 2.0 mm edge materials, the machine switches pneumatically between programs. Main Specifications: Lredpsxlr S Hsfx Ahusn - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100-150 l/min) - Touchscreen display - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness from coil: 0.5-3.0 mm - Workpiece thickness: 8-60 mm (edge banding possible on 60 mm thick material) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm for end trimming saw / 220 mm for end rounding - Processing units: - Diamond pre-milling unit (12,000 rpm) - Release agent tank/spray - Gluing unit - Edge trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/spray - Flat scraper - Polishing disc Price does not include VAT.

Stanje: rabljeno, Leto izdelave: 2013, Lepljenje robov, poravnalno žaganje, kombinirano rezkanje, ploščato vlečno rezilo. Največja debelina roba: 3 / 8 mm. Največja višina obdelovanca: pribl. 40 / 50 mm. Najmanjša dolžina obdelovanca: pribl. 250 / 300 mm. Najmanjša širina obdelovanca: pribl. 70 mm. Hitrost podajanja: pribl. 10 m/min. Pripravljeno za obratovanje v: pribl. 6 min. Priključna moč: 6,5 kW. Premično podvozje, delovna višina: 880 mm. Dimenzije: 3600 x 1300 x 1500 mm. Teža: pribl. 660 kg. Lodpfx Aozcw Amjhuern Lokacija skladišča: Dobavitelj

Stanje: rabljeno, Hebrock K34 Debelina roba do 8 mm SPS zaslon s 15" zaslonom na dotik Predrezalna enota za pripravo pred lepilnim delom (3 mm) Lepilna kad z zamenljivim rezervarjem in izpustom lepila Največja višina roba: 60 mm Odrezovalna enota Lrjdowtfvkopfx Ahuon Rezkalna enota za poravnavo/radije/fazete Enota za zaobljanje vogalov (radiji/fazete) Večradijski strgalnik (R1/R2) Nesting Površinski strgalnik Naprava za brizganje ločilnega sredstva Letnik 2023, 52 delovnih ur Stroj je KOT NOV, V VRHUNSKEM STANJU Iz razpuščene mizarske delavnice/pokojnina Iz mizarske delavnice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Tehnični podatki: • Proizvajalec: Hebrock GmbH (Izdelano v Nemčiji) • Tip: EURO 2000 • Leto izdelave: 2000 • Napetost: 230 / 400 V • Frekvenca: 50 Hz • Moč: 7 kW • Tok: 13,6 A Delovno območje: • Debelina obdelovanca: ca. 10 – 50 mm • Debelina roba: ca. 0,5 – 3 mm • Minimalna dolžina obdelovanca: ca. 250 mm • Minimalna širina obdelovanca: ca. 70 mm • Hitrost podajanja: ca. 10 m/min • Potreben priklop stisnjenega zraka (ca. 6–7 bar) Lokacija: iz zaloge 54634 Bitburg - takoj na voljo - Ljdszbyvaopfx Ahuorn

Stanje: novo, Leto izdelave: 2026, Hebrock - Altendorf Edge Banding Machine F5 next - New machine, still in its original packaging, with complete equipment - With PLC control including 15" touchscreen - Edging material up to 3 mm - Whispercut pre-milling unit including DIA-tool up to 2 mm - Coated, maintenance-free glue pot, PU quick-change pot - Including glue runoff device (downwards) - HF milling station with pneumatic milling adjustment - Corner rounding unit - Radius scraper blade - Surface scraper blade including pneumatic lifting device - Buffing station - Combination milling head - Radius milling head R=2mm - Radius corner milling head R=2mm - Quick-change device for corner milling head - Additional exchange motor for corner milling head with tool assembly - Radius exchange motor R=1mm - Ball bearings 24.1 and 24.2 mm - Multi-radius scraper R1/R2 Lsdey Iw Nrepfx Ahuorn - Chassis - Additional exchange glue pot including stand - PUR separation agent spraying unit - PUR cleaning agent spraying unit - Edge spraying unit for PUR/foil - Nesting for milling and radius scraper blade - Pneumatic 3-point adjustment (radius, chamfer, flush milling) - Pre-milling up to 50mm workpiece thickness - LED lighting in interior compartment - Workpiece thickness 8-50mm - Minimum workpiece length approx. 160mm - Feed rate approx. 10m/min - Dimensions (LxWxH): 4.40 x 1.10 x 1.55m - Weight: gross 990 kg, net 930 kg - Extraction port 1 x 140mm Delivery and commissioning available

Stanje: novo, Leto izdelave: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures edge processing in every stage, as it comes equipped with all the components you need for your requirements: pre-milling unit, end trimming saw, milling unit, radius scraper, corner rounding unit, flat scraper, and buffing unit. For even greater flexibility to achieve the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Lodolht Hwepfx Ahujrn Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and with adhesive application to the workpiece for edge material up to 3 mm; pre-milling unit (incl. diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change system including glue discharge device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination design), corner rounding unit, radius scraper, flat scraper (including pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change system for corner rounding unit F5/08/5 Additional changeover motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge F5/27. Nesting for milling unit and radius scraper F5/30. Pneumatic 3-point adjustment (for radius, chamfer, flush milling) Location: Ex stock 54634 Bitburg - Available in week 4 -

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: Lrsdolht Hzjpfx Ahujn F2 - 10 m/min feed speed F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with all the features you need to achieve perfect edges right from the start: diamond-tipped jointing cutters ensure that workpieces are excellently prepared for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: F2 - 10 m/min Lrodpfji Am U Djx Ahuon Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change reservoir system including glue drainage device, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination version), robust chain feed, ball bearing mounted double roller top pressure, inspection window from the rear of the machine, extendable workpiece support, feed approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling)

Stanje: novo, Leto izdelave: 2025, Hebrock F 4 For Complete Processing of Your Panels For those who don't want to do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges within just 4 meters of machine length. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. total power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Ledpfx Ahehqadcoujrn Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm SPS control with 10" touchscreen Top-mounted quick-heating glue pot (maintenance free) Support plate for edge material Automatic central lubrication (for crosscut saw, corner rounding unit) Optical workpiece sequence indicator Support arm (extendable to the front) Pre-equipment for glue pot change incl. PUR glue change system Flat surface scraper with dual tracing Pneumatic roller end trimming (scissor-cut design, Hebrock system) Double roller top pressure (ball bearing mounted) Transport chain with fixed special chain plates Pre-milling unit Milling unit Crosscut saw Corner rounding unit Accessories: F4/09 radius scraper (incl. pneumatic lift) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: Ex stock 54634 Bitburg - available at short notice -