Hebrock Euro 3001 nakup rabljenega (48)

Stanje: rabljeno, Kompaktni robni lepilni stroj Hebrock EURO 3001 za natančno robljenje plošč z robnimi trakovi. Stroj omogoča čisto obdelavo robov z avtomatskim nanosom lepila, pritisnimi valji in naknadnimi obdelovalnimi enotami. Idealno za pohištveno in notranjo opremo. Tehnični podatki so informativni. Agregat 1: Nanašanje lepila Agregat 2: Obrezovanje Agregat 3: Poravnava z rezkanjem Višina obdelovanca: pribl. 10 – 40 mm Itsdpoxdc D Rjfx Ah Asr Debelina roba: maks. pribl. 12 mm Podajalna hitrost: pribl. 10 m/min

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Itsdpel D Rp Esfx Ah Aer Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: rabljeno, Leto izdelave: 1996, Smer gibanja plošče: od upravljavca na levo Največja debelina obrobe: 8,0 mm Minimalna širina obdelovanca: 70 mm Hitrost podajanja: 11 m/min Čas segrevanja: 4,5 min Avtomatski zalogovnik za role: Da Giljotinske škarje za: 0,2 - 3,0 mm Posamično podajanje roba: Da Avtomatsko lepljenje: lepilna kad z granulatom zgoraj Isdpfxjxwdp Uo Ah Ajtr Giljotinska žaga: fiksna 90° Poravnalna rezkar: Da Kombinirani rezkar: Da Prikaz agregatov: prikaz agregata Vrsta krmiljenja: ročno Upravljanje: izbirno stikalo/gumbi Pogonska naprava: Da Zaščitni pokrov: Da Delovna višina oz. višina podajalne mize: 870 mm Teža cca: 670 kg Dimenzije: 3600 x 1400 x 1200 mm Moč motorja: 11 kW Premer odsesavanja: 120 mm Lokacija zaloge: Ponudnik

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Ta HEBROCK AKV 3003 DK-F je bil izdelan leta 2002. Robustni robni lepilnik z skupno močjo 10,5 kW, ki deluje na 230/400 V in 50 Hz. Idealen za učinkovito lepljenje robov. Za več informacij o tej napravi nas kontaktirajte. Itjdpfxex E Eayo Ah Aer Vrste uporabe Lepljenje robov

Stanje: rabljeno, Leto izdelave: 2015, Rabljeni stroj Leto izdelave: 2015 Stanje: zelo dobro vzdrževan; malo delovnih ur Oprema in tehnični podatki: - s PLC krmilnikom, vključno z zaslonom na dotik - z združevalno rezkalno enoto z DIA-orodjem do globine rezkanja 2 mm (Maks. debelina spajanja 1 mm pri posebnih materialih, npr. večslojna vezana plošča) - z izvležno podporo za obdelovanec - s hitro ogrevanim lepilnim koritom z možnostjo menjave lepila - z kapno žago - s kombiniranim rezkanjem r = 2 mm s posebej pnevmatskim nastavljanjem rezkanja - z zaokroževanjem vogalov r = 2 mm - s površinsko vlečno rezilom - maks. debelina robnega traku: 2 mm - min. – maks. debelina obdelovanca: 10 – 40 mm Itodpfx Ahox Enqhj Aer - min. dolžina obdelovanca: 180 mm - hitrost podajanja: približno 7 m/min - čas pripravljenosti za delo: približno 3,5 min - priključna moč: cca 7,4 kW - s podvozjem - odsesovalni priključek: 1 x 140 mm Mere: približno 4.200 x 1.300 x 1.400 mm Teža: približno 750 kg Razpoložljivost: približno konec januarja 2026 Lokacija: Hessen

Stanje: rabljeno, Leto izdelave: 2016, Smer plošče: od operaterja na levo Največja debelina robnega traku: 2 mm Minimalna debelina obdelovanca: 10 mm Maksimalna debelina obdelovanca: 40 mm Minimalna dolžina obdelovanca: 180 mm Podajalna hitrost: 7 m/min Čas ogrevanja: 4 min Lepljenje spoja: Da, z 2 rezkalnima enotama Orodje za lepljenje spoja: Diamantni rezkar Premer: 70 mm Višina: 43 mm Nastavitev vhodnega vodila: Diamantni rezkar Krožne škarje do: 2 mm Posamezno podajanje roba: možno Lepljenje: Lepljilni kontaktni valj Krožna žaga: Da Kombinirana enota Poravnava/posnemanje/radius: pnevmatsko nastavljiva Ravna strgala: Da, s sledenjem Prikaz števila enot: na zaslonu Vrsta krmiljenja: PLC linijsko krmiljenje Upravljanje: zaslon na dotik Moč motorja: 7,4 kW Ijdpfx Ahjx Hwq Tj Ajtr Pogon: Da Izvlečna valjčna podpora: Da Zaščitni pokrov: Da Teža cca.: 750 kg Premer odsesavanja: 140 mm Električni priključek: 400 voltov / 50 Hz Lokacija skladišča: Kupec

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3074, hitrost podajanja osi Y: 10 m/min, skupna dolžina: 4.984 mm, višina obdelovanca (maks.): 60 mm, skupna širina: 1.425 mm, največja debelina roba: 3 mm, skupna višina: 1.618 mm, skupna masa: 1.400 kg, vrsta vhodnega toka: trifazni, vrsta nastavitve višine: mehanski, vhodna napetost: 400 V, premer ekstrakcijske šobe: 140 mm, delovna višina: 888 mm, vhodni tok: 32 A, vhodna frekvenca: 50 Hz, premer povezave za izpihovanje: 140 mm, leto zadnje generalne obnove: 2025, For sale due to the purchase of a new machine: our reliable edge banding machine, bought new in 2016. The machine operated in an 8-person carpentry workshop. It underwent a complete refurbishment in January 2025, which included new radius scrapers, new milling tools, and new polishing discs. The pre-milling unit was sharpened; the glue roller clutch was replaced. The glue tank was fully refurbished and cleaned. The machine is suitable for both EVA granulate (e.g. Henkel Dorus KS351) and PUR adhesive applications. The pre-milling amount, edge banding material thickness, and upper/lower milling tool positions can be conveniently adjusted from outside the machine housing using handwheels. The control system allows you to save custom edge banding programs. For 0.4 mm and 2.0 mm edge materials, the machine switches pneumatically between programs. Main Specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100-150 l/min) - Touchscreen display - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness from coil: 0.5-3.0 mm - Workpiece thickness: 8-60 mm (edge banding possible on 60 mm thick material) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm for end trimming saw / 220 mm for end rounding - Processing units: - Diamond pre-milling unit (12,000 rpm) - Release agent tank/spray - Gluing unit - Edge trimming saw Itsdpjxlr S Hefx Ah Aor - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/spray - Flat scraper - Polishing disc Price does not include VAT.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 730 h, Edgebanding machine Hebrock AKV3005DK-F with jointing, corner copying, and two scrape blades. Very well-maintained machine from a small business in excellent condition. Touchscreen interface with PLC control for easy operation; up to 12 operating programs can be stored. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Soundproof enclosure Extendable workpiece support table, special equipment extendable up to 950mm Extraction connection 80 + 140mm Units: Quick-change glue pot with glue outlet; two glue pots included in the scope of delivery (one used for EVA glue and one for PUR glue). The PUR glue pot is practically as new, purchased for a single job only. Manual pressure beam adjustment with SIKO readout Manual infeed fence adjustment with SIKO readout Manual edge thickness adjustment with SIKO readout Jointing unit with Leitz Whispercut diamant cutters, still sharp Gluing section with automatic edge feed for rolls up to 3mm Pressure section with 4 rollers Cross-cut saw Integrated offcut container for edge trimmings Combination milling unit, R2, with pneumatic adjustment for thin and thick edge Itsdpotpn Etjfx Ah Asr Corner rounding unit R2, pneumatically adjustable between thin and thick edge The form milling unit can also be used for the shelf program, i.e., only the straight edge is rounded, not the corners Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Cover interlock CE marking Operating manual A video of the machine in operation can be provided upon request. All reversible knives of the milling units and scrapers have been replaced or rotated; saw blades sharpened. The machine is thus immediately ready for use. Only the diamond joint cutters (Whispercut) have not been replaced but are still sharp. Paint damage has been touched up. The Hebrock AKV series is the predecessor to the current K series. Machine has only approx. 730 operating hours (glue pot switched on), but the frequency inverters were only on for approx. 455 hours. Machine is in very good condition, see original photos. Machine dimensions approx. 5000 x 1400 x 1550mm (LxWxH) Weight approx. 1550kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this provider."

Stanje: rabljeno, Leto izdelave: 2018, Edge Banding Machine AKV 3006 DK-F with Jointing Cutter Unit including DIA Tools - Jointing thickness up to 40 mm - Workpiece thickness up to 3 mm - Combination milling station Radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edge materials up to 3 mm - Workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable knives (combination design) and fine adjustment of the cutter from the operator side - Provision for additional processing units (System Hebrock) Iodpfx Ahexfh Tme Aetr - Feed rate approx. 10 m/min - Cutting depth adjustment of the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double roller top pressure beam - Aggregate viewing window from the rear and operator side of machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m / min - Panel thickness: 8 - 40 mm - Weight: depending on configuration approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment (1 pc) Switchable radius/chamfer for combination milling stations. Switching between chamfer or flush is manual by repositioning the stop flap inside the machine. Buffing unit (polishing mop): 1 pc Corner rounding cutter: 1 pc, incl. combination tool and pneumatic radius/chamfer adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper: 1 pc, incl. pneumatic retraction device, radius R 2.0 mm Flat scraper: 1 pc with pneumatic control Glue station quick-change system including second glue pot and downward glue discharge (1 pc) for rapid color change Horizontal grooving saw unit into the edge: 1 pc, incl. pneumatic retraction and groove tool Separate extraction for jointing unit: 1 pc, direct connection on the jointing unit, vertical above, d = 80 mm for optimal extraction performance; strongly recommended from model AKV 3005 DK-F Ball bearing for corner rounding cutter, 24.1 mm: 1 pc Ball bearing for corner rounding cutter, 24.2 mm: 1 pc Replacement motor 0.37 kW for corner rounding cutter, with quick-change system including radius cutter R 1 Replacement spindles, 1 set = 2 pcs 1 set quick-change motors for longitudinal machining, top and bottom, including tool R 1 Compressed air requirement: 100 – 150 l/hr Location: Nattheim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Ta Hebrock TOP 2000 PLUS je bila izdelana leta 2015. Rabljeni robni lepilni stroj je opremljen z lepilno enoto, rezalno enoto in kombinirano rezkalno enoto. Obdeluje robne materiale debeline od 0,5 do 3 mm in lahko obdela obdelovance debeline od 10 do 45 mm. Idealen za natančna zaključna dela na robovih. Za več informacij o stroju nas kontaktirajte. Itjdpfx Aox D Nlbsh Aer Vrste uporabe Lepiljenje robov

Stanje: rabljeno, Leto izdelave: 1991, Rabljeni stroj Leto izdelave: 1991 maks. višina obdelovanca približno 40 mm min. dolžina obdelovanca približno 250 mm min. širina obdelovanca približno 70 mm Pomik približno 11 m/min. Pripravljen za obratovanje v približno 4-5 min. Poraba energije približno 11 kW Z ogrevanim vstopnim ravnilom S hitro grelnim lepilnim rezervoarjem Iedowka Tlepfx Ah Aotr Pnevmatsko kapiranje robov do 3 mm S kapirno žago za debelino roba do 5 mm Z rezkalno postajo po želji opremljeno s kombiniranimi rezkarji z izmenljivimi ploščicami za radiusno, ravno in posneto rezkanje Konzola, zložljiva in izvlečna proti sprednji strani S podvozjem Z integriranim odsesavanjem D x Š x V 3600 x 1400 x 1200 mm Teža približno 670 kg Razpoložljivost: kratkoročno Lokacija: Flörsheim

Stanje: novo, Leto izdelave: 2024, IN STOCK!!!! Max. edge thickness 3 mm Min/Max. workpiece thickness 8 - 50 mm Iodpfeglfwtjx Ah Aotr Min. workpiece length approx. 160 mm Feed speed approx. 10 m/min Ready for operation a pprox. 3.5 min. Max. power consumption approx. 7.4 kW Electrical connection 400 V – 3 Ph – 50 Hz Working table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Extraction nozzle Ø 1 x 140 mm Edgebander with PLC control Jointing unit (incl. DIA-tool) up to 2 mm milling depth Combination milling head Radius milling R=2 mm Radius corner milling R=2 mm Radius scraper blade R=2 mm

Stanje: rabljeno, Leto izdelave: 2010, skupna dolžina: 5.250 mm, skupna višina: 1.780 mm, skupna širina: 1.060 mm, Teža: 1.500 kg Iedowp D Udspfx Ah Aetr Cena: Po dogovoru - Leto izdelave: 2010 - Dokumentacija na voljo: Ne - CE označba prisotna: Da - CE certifikat prisoten: Ne - Serijska številka: 1969 - Transportne dimenzije: 5250mm x 1060mm x 1780mm (d x š x v) - Transportna teža [kg]: 1.500 kg - Transportnih paketov [kos]: 1 Finančne informacije DDV: Naveden cena ne vključuje DDV DDV / Obravnavanje razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse iz industrijske panoge Yorick Diebels

Stanje: novo, Leto izdelave: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures edge processing in every stage, as it comes equipped with all the components you need for your requirements: pre-milling unit, end trimming saw, milling unit, radius scraper, corner rounding unit, flat scraper, and buffing unit. For even greater flexibility to achieve the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Itedelht Hwspfx Ah Ajr Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and with adhesive application to the workpiece for edge material up to 3 mm; pre-milling unit (incl. diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change system including glue discharge device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination design), corner rounding unit, radius scraper, flat scraper (including pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change system for corner rounding unit F5/08/5 Additional changeover motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge F5/27. Nesting for milling unit and radius scraper F5/30. Pneumatic 3-point adjustment (for radius, chamfer, flush milling) Location: Ex stock 54634 Bitburg - Available in week 4 -

Stanje: rabljeno, Leto izdelave: 2011, pnevmatska nastavitev rezkarja (ravno/radij) Kombinirana rezkarska postaja R=2 Rezkar zaokroževanja robov R= 2 do 40 mm Spojni rezkar do 40 mm Ravno strgalo Profilno strgalo R = 2 Kratki obdelovanci SPS krmiljenje z zaslonom na dotik Pro Face Gnezdenje Hlajenje/antistatično pršenje - airtronic Zaščitno pršenje roba Riepe z vključenim zamenljivim rezervoarjem Debelina obdelovanca 8 - 60 mm Mehanska pritrditev roba Odvzemna odprtina: 140 mm Dimenzije: Dolžina z izpostavo: 4984 mm Globina z valjčno mizo: 1425 mm Največja višina: 1618 mm Višina delovne mize: 888 mm Teža: 1400 kg Lokacija skladišča: Nattheim Itodpfsxyiiljx Ah Asr

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 50 mm, največja debelina roba: 3 mm, delovna višina: 900 mm, potrebna višina: 1.400 mm, zahteva za prostor dolžina: 4.050 mm, potrebna širina: 1.300 mm, obratovalni tlak: 7 letvica, with PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: jointing cutter (including DIA tool), up to 2 mm milling depth (max. 1 mm for special materials such as multiplex), maintenance-free glue pot with quick-change system, including glue discharge device, high-frequency cross-cut saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and insertable cutter (combined version), corner rounding unit, surface scraper (incl. pneumatic lift), robust chain feed, double pressure rollers with ball bearings, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Complete with quick-change corner milling unit, radius scraper (incl. pneumatic lift), running gear F 4 – Technical Profile Max. edge thickness: 3 mm Min. / Max. workpiece thickness: 8 – 50 mm Itjdpsx E N Nfsfx Ah Ajr Min. workpiece length: approx. 160 mm Feed speed: 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V / 3 Ph / 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction port: ∅ 1 x 140 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2459, Stroj v zelo dobrem stanju - zelo pregleden upravljalni del - minimalna širina obdelovanca cca 80 mm - minimalna dolžina obdelovanca cca 200 mm - podajna hitrost cca 10 m/min Ijdpfx Asx Ahmush Aetr - transportna veriga s trdno privitimi specialnimi verižnimi ploščami - dvojni zgornji pritisni valj - dolžina stroja 4300 mm - širina stroja 1400 mm - teža cca 1250 kg - izvlečni nosilec obdelovanca na sprednji strani - avtom. centralno mazanje za kapno žago & kotno rezkanje - posoda za talilno lepilo s teflonsko prevleko (zelo malo vzdrževanja) - pripravljenost za obratovanje cca 5 - 6 minut - Poravnalna enota - pnevmatsko valjčno kapiranje - neposredno nanašanje lepila na obdelovanec - kapirna enota za sprednjo in zadnjo stran - poravnalna/posnemalna/radialna rezkalna enota - zaobljanje robov - ravnalna strgala s dvojno kontrolo

Stanje: novo, Leto izdelave: 2024, IN STOCK!!! Max. edge thickness: 3 mm Min./Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ready for operation: approx. 3.5 min Weight: approx. 900 kg Max. power consumption: Ø approx. 7.4 kW Extraction port: Ø 1 x 140 mm Electrical connection: 400 V - 3 Ph - 50 Hz Working table height: approx. 900 mm Feed speed: approx. 10 m/min Machine dimensions: approx. 4,300 x 1,300 x 1,400 mm (LxWxH) Combination milling head Radius cutter R=2 mm Radius corner cutter R=2 mm Radius scraper blade R=2 mm Ijdehymgdspfx Ah Aetr

Stanje: rabljeno, Leto izdelave: 2012, Stroj na nanášanie hrán HEBROCK AKV 3006 DK FS Maximálna hrúbka hrany: 3/8 mm Minimálna / maximálna hrúbka obrobku: 10/40 mm Minimálna dĺžka obrobku: cca 200 mm Minimálna šírka obrobku: cca 80 mm Posuvná rýchlosť: cca 10 m/min Hotový výrobok cca za 6 minút. Isdpfx Ahswnhb So Aetr Maximálny príkon: 12 kW Elektrické pripojenie: 400 V / 3 Ph / 50 Hz Vybavenie: - Predfrézovacia jednotka - Lepiaca jednotka - Tlakový valec - Odkružovacia píla - Frézovacia jednotka - Frézovacia jednotka - Zaobľovacia jednotka hrán - Rádiusový škrabák - Plochý škrabák - Čistiaca jednotka Rozmery (D x Š x V): 5250 x 1445 x 1600 mm, Hmotnosť: 1550 kg - Rok výroby: 2012 - Dokumentácia k dispozícii: Nie - CE certifikát k dispozícii: Nie Finančné informácie: DPH: Uvedená cena je bez DPH. DPH/rozdielové zdanenie: DPH je pre podnikateľov odpočítateľná. Doručenie a výkup možný kedykoľvek pre všetok tovar z priemyselného sektora. Yorick Diebels

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Ijdpfjlht Hzsx Ah Aetr Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: F2 - 10 m/min feed speed F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Stanje: zelo dobro (rabljeno), Hebrock 3003 Edge Banding Machine Well equipped, possibility to inspect before purchase PRE-MILLING cutters Itedswmc I Dopfx Ah Aer Zero Joint AirTronic system – glueless hot air technology Glue application by roller Pneumatic pre-cut guillotine Pressure rollers Anti-adhesive fluids End-trimming saw Top and bottom milling unit, radius R1 – R2 adjustable pneumatically Corner rounding unit adjustable pneumatically Flat scraper Max workpiece height: 50mm Max edge thickness in roll: 3mm Feed speed: 10 m/min Power requirement: 15.8 kW Condition: Very good, fully functional

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with all the features you need to achieve perfect edges right from the start: diamond-tipped jointing cutters ensure that workpieces are excellently prepared for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Itjdpfei Am U Dsx Ah Ajr Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change reservoir system including glue drainage device, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination version), robust chain feed, ball bearing mounted double roller top pressure, inspection window from the rear of the machine, extendable workpiece support, feed approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling)

Stanje: novo, Leto izdelave: 2025, Hebrock F 4 For Complete Processing of Your Panels For those who don't want to do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges within just 4 meters of machine length. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. total power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm SPS control with 10" touchscreen Top-mounted quick-heating glue pot (maintenance free) Support plate for edge material Automatic central lubrication (for crosscut saw, corner rounding unit) Optical workpiece sequence indicator Support arm (extendable to the front) Pre-equipment for glue pot change incl. PUR glue change system Flat surface scraper with dual tracing Pneumatic roller end trimming (scissor-cut design, Hebrock system) Double roller top pressure (ball bearing mounted) Itsdpfx Ahjhqadcj Asr Transport chain with fixed special chain plates Pre-milling unit Milling unit Crosscut saw Corner rounding unit Accessories: F4/09 radius scraper (incl. pneumatic lift) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: Ex stock 54634 Bitburg - available at short notice -

Stanje: novo, Leto izdelave: 2025, The Hebrock K 36 – top specification with motorized adjustment – showroom model – as-new machine – – immediately available – This perennial favorite from Hebrock offers unprecedented possibilities. Designed for the highest demands, the K 36 stands for absolute reliability and productivity in daily operation. The option to equip the machine with a profile cutter and a multi-radius scraper sets new standards in perfect edge processing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Itedsi Am Ukspfx Ah Ajr Ready for operation in 6 min. Technical Data: Max. edge thickness: 3 mm Min./max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power input: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1750 kg Features: Hebrock K 36 – 15 m/min Edge banding machine K36 With PLC control (incl. 15" touchscreen), hot-melt adhesive application onto the workpiece for edge material up to 3 mm; joint trimming unit (incl. carbide-tipped tool) up to 3 mm trimming depth, maintenance-free, coated glue pot with quick-change system incl. glue discharge device, HF double-motor end trimming station (approx. 12,000 rpm), HF trimming station (approx. 12,000 rpm) with pneumatic adjustment and interchangeable cutter head (combi design), corner rounding unit, radius scraper, flat scraper (incl. pneumatic lift-up device), buffing station, robust chain feed, ball-bearing mounted double pressure rollers, aggregate inspection windows on both the rear and operator sides, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, banding up to 60 mm workpiece thickness. Equipment Options: 36/08/1 Quick-change corner rounding unit 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 36/09/1 Multi-radius scraper 36/24/1 Separator spraying device 36/24/2 Cleaning agent spraying device 36/25 Edge protection spraying 36/27 Nesting (1x trimming station + 1x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF trimming station (R2/R1 /chamfer) 36/45 Axis package for motorized panel/edge thickness and joint trimming depth adjustment Location: ex-stock 54634 Bitburg – immediately available –

Stanje: novo, Leto izdelave: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding woodworking operations. The F 5 guarantees edge processing at every stage, as it comes equipped with all the components you need to meet your requirements: jointing cutter, cross-cut saw, milling unit, radius scraper blade, corner rounding unit, flat scraper blade, and buffing station. For even greater flexibility in achieving a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min F5 Next Edgebander With PLC control (including touchscreen) and hot-melt glue application directly to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tooling) for up to 2 mm cutting depth, maintenance-free glue pot with quick-change feature including glue drain, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combi version), corner rounding unit, radius scraper blade, flat scraper blade (including pneumatic lift), buffing station, robust chain feed, double roller top pressure with ball bearings, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Iodpoi Anadofx Ah Aetr F5/08/4 Quick-change device for corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tooling F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Edge spray unit F5/27. Nesting for milling and radius scraper blade F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: Ex stock 54634 Bitburg Available in calendar week: 4/2024