Stroj za robne trakove

HEBROCK K34

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Kjdpjv Erkajfx Ag Tedr Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Kodpfx Ageqt Dmyo Todr Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: novo, Leto izdelave: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Kodpfx Ajg Tu Rkjg Tedr Min./max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointer head Corner rounding unit (radius R = 2 mm) Quick-change device for corner rounding unit Corner rounding change motor (radius EF R = 1 mm) Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spraying Nesting function Pneumatic 3-point adjustment Multi-function milling cutter (R2/R1/chamfer) Equipment for short workpieces

Stanje: rabljeno, Leto izdelave: 1998, Rabljeni stroj Letnik izdelave: 1998 Stanje: dobro vzdrževan (šolski stroj) Oprema: Rezkalna enota 5 kW Valjasto vpenjalo 25 mm s priteznim ključem Vrtalna enota 1,5 kW z 19 vreteni Križna glava s 4 vrtalnimi vreteni Žagalna enota se lahko zasuče iz X na Y os. Svetlobne pregrade v sprednjem delu Računalnik nov leta 2015 Kjdpfxjxqihcj Ag Tedr Operacijski sistem Windows 98 Weeke - programska oprema Woodwop 4.0 Tehnični podatki: Pomik X: 3455 mm Pomik Y: 1480 mm Pomik Z: 260 mm Zunanje mere: Dolžina: pribl. 6115 mm Globina: pribl. 3660 mm Lokacija: Röllbach Razpoložljivost: takojšnja

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Pneumatically actuated sanding pad Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Kdedpfxog A D Anj Ag Ter Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Stanje: rabljeno, Leto izdelave: 2025, Funkcionalnost: nepreverjeno, Homag Centateq P110 PROFI BMG110/3115/F/K CNC obdelovalni center (2025) vključno z Kdodpfx Aozc Rzpog Ter Almig Combi XP15 kompresorjem zraka z rezervoarjem (2025) sistem za odsesavanje prahu Air Plants Dust Extraction Ltd (2025)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Biesse Akron 1330 A Kantenanleimmaschine Einseitige Kantenanleimmaschine AKRON 1330-A Leimauftragseinheit SP03 Kappenaggregat IT03 Feintrimmaggregat RF02 Eckenrundungsaggregat AR02 VORFRÄSAGGREGAT RT02 mit symmetrischen Diamantwerkzeugen H=45 mm Z=2+2 30°, inklusive. KANTENSCHABER RB02 (Werkzeuge nicht enthalten) LEIMSCHABER-EINHEIT RC02 BÜRSTAGGREGAT SZ02 ERGÄNZENDE SEITLICHE WERKSTÜCKUNTERSTÜTZUNG MONTAGEKIT FÜR RÜCKFÜHRUNGSSYSTEM HANDEINSCHUBVORRICHTUNG FÜR SCHMALE TEILE SET ZUR BEARBEITUNG VON "SHADOW LINE"-PROFILPLATTEN GERADER LUFTTISCH AM MASCHINENZUFÜHRBEREICH ANTIHAFTMITTELSYSTEM ADZ02 PAAR DIAMANTIERTE FRÄSER H=65 mm Z=2+2 30°. Zum Austausch der Standardwerkzeuge. HYBRID-LEIMAUFNAHMEEINHEIT FÜR GRANULAT-EVA/PUR-LEIM STATT STANDARD-SYSTEM TM15 HYBRID-VORSCHMELZER FÜR EVA/PUR-LEIM ADAPTIVE INFRAROTLAMPE AdIRL-700 AX-4, NC-ACHSE AM FEINSCHNEIDAGGREGAT PRO-NESTING-KIT FÜR DAS FEINSCHNEIDAGGREGAT Paar Mehrprofilfräser für das Feinschneidaggregat: Fase 25 Grad, R=2 mm + R=1 mm, gerades Profil für Massivholz AX-2, NC-ACHSE AM ECKENRUNDUNGSAGGREGAT NUR RUNDFUNKTION Kdjdpjyyb Icefx Ag Tor SCHIEBEEINHEIT FÜR DAS ECKENRUNDUNGSAGGREGAT Paar Fräser, R=2 mm, für Eckenrundungsaggregat Paar Fräser, R=1 mm, für Eckenrundungsaggregat AX-4, NC-ACHSE AM KANTENSCHABER PRO-NESTING-KIT FÜR DEN KANTENSCHABER Paar Messer R=2 mm, für Kantenschaber Paar Messer R=1 mm, für Kantenschaber REINIGUNGSEINHEIT LPT02 (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Stanje: zelo dobro (rabljeno), Briketirka POR Oscar 9kW Povprečna proizvodnja briketov: 130-180 kg Premer briketa: 70 mm Moč motorja: 9 kW Premer vstopnega lijaka: 1170 mm Tehnična dokumentacija CE oznaka Teža stroja cca. 800 kg Kdjdpfexdahyex Ag Tsr

Leto izdelave: 2010, stanje: dober (rabljeno), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Full protection of the operating head and the working area on the machine - Numerical control (CNC) with BIESSE Works software on Windows - Vertical panel positioning with 2 panel clamping vices - Panel feed (in the X-axis direction, on the lower support with rubber rollers), movement of clamping vices (in X-axis) for panel/workpiece fixing WORKPIECE DIMENSIONS (WORKING RANGE): - Length Min 160 mm / Max 3200 mm - Width Min 35 mm / Max 900 mm - Thickness Min 8 mm / Max 80 mm WORKING UNITS: - No. 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18000 RPM) - No. 1 circular saw (for grooves), 120 mm diameter (fixed on X-axis) - No. 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - No. 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - No. 1 drilling head for hinge boring - Total installed power: 20 KW Kodpfshknbrox Ag Tsdr AUTOMATIC DOWEL INSERTION UNIT ON BOTH SIDES WITH PRESSURE PUMP FOR GLUE APPLICATION.

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), I am selling window sets suitable for CNC window production centers: LEUT wood-aluminum 110mm Hole 50mm. Complete set. Very good condition. Available as a set. Can also be purchased separately. Kdjdpfx Ajg Tumyog Ter