Obdelovalni center

IMA 410 V 140/600

Stanje: skoraj kot novo (rabljeno), Profile grinding machine Utma model P20 Godpfx Aasff H E Re Ueug

Stanje: rabljeno, Leto izdelave: 2012, Integrated NC processing centre for windows and doors comprising: A) Automatic Loader, Model 'SP' Automatic loader for Base SP with 1 profiling machine - Automatic loader consisting of: - Table with motorized belts - Automatic device for transferring parts from buffer to loading area of the profiling machine * Minimum workpiece length: 450 mm, maximum: 3200 mm * Minimum workpiece width: 40 mm, maximum: 230 mm * Minimum workpiece thickness: 40 mm, maximum: 120 mm * Working cycles: 10/min * Chain feed speed on table: 7 m/min * Loading table dimensions: 2800 x 2150 mm B) Automatic Moulder Model SUPERSET NT C 6 Position 1 = Planer spindle Position 2 = 1st right vertical spindle Position 3 = 1st left vertical spindle Position 4 = 1st upper horizontal spindle Position 5 = 1st lower horizontal spindle Position 6 = Group for bead recovery 2500 mm infeed height Feed speed 6–36 m/min via inverter Nr. 1 - Motor power 5.5 HP (4 kW) Horizontal pressure roller in front of the planer with pneumatic disengagement from the control panel Pneumatic disengagement for the infeed unit before the planer spindle, controlled from the operator panel Tandem infeed group before the right vertical with quick release Feed units after the upper spindles to reduce trailing distance from 620 mm to 450 mm Infeed guide with bearings for automatic feeders Electrical set-up for the use of automatic loaders Manual central lubrication Pump for lubricating the worktable with automatic drive Preparation for inline integration with INTEGRA SYSTEM - Working height increased to 970 mm - Entry signal light - Piece counter Independent control panel POS. 1 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) T-SET quick-change tool clamping system - Enables locking/unlocking of the tool using a simple air nozzle POS. 2 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Vertical spindle with an effective length of 180 mm T-SET quick-change tool clamping system Electronic vertical positioning POS. 3 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) High-precision spindle Vertical spindle with an effective length of 180 mm T-SET quick-change tool clamping system Electronic horizontal positioning POS. 4 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Speed 8,300 rpm T-SET quick-change tool clamping system Electronic vertical positioning POS. 5 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Speed 8,300 rpm T-SET quick-change tool clamping system POS. 6 Glazing bead recovery group Includes: PRL enables automatic transition from profiling to glazing bead recovery and vice versa - Working unit with spindle diameter 30 mm, length 30 mm Guedpfxjixxwmj Aa Ujg - Electronic horizontal positioning - Electronic vertical positioning - Hardware and PLC modifications for axis management - Modified tandem outfeed

Stanje: zelo dobro (rabljeno), 4-sided DOUBLE END PROFILER LINE, currently configured for INTERIOR DOORS, Guedowzmbqjpfx Aa Ueg Consisting of the following machines: X10023A) CELASCHI powered roller conveyor for infeed X10023B) CELASCHI DOUBLE END PROFILER Model TSA 3 B 480 A Installed total power: 65 kW X10023C) CELASCHI 90° transfer (L-shaped powered roller conveyors) X10023D) CELASCHI DOUBLE END PROFILER Model TSA 2 B 360 Installed total power: 65 kW

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for processing wood, plastic, and aluminum. Gantry design machine with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Gedpfx Aaevmpx Rj Ujug Technical specifications: CNC control BWO Vektor 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (top edge of vacuum cups) Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum cups) A-axis: 540° (rotary axis), B-axis: 196° (swivel axis +/- 98°) Rapid traverse speed: X/Y axis 45 m/min, Z axis 15 m/min, A/B axis 10,000°/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, max. power 12.5 kW, steplessly adjustable speed up to 17,000 rpm, milling spindle water-cooled. - 1 CNC height-adjustable chip collection system with lamellar curtain. Tool magazine: - Tool interface ISO 40 for automatic tool change system. - 2 chain tool magazines with 32 positions each for tools up to D = 90 mm, with sorted storage up to max. 160 mm (three positions required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for stops "raise/lower" - 2 control circuits for pneumatics "clamp/release" - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 2 stepped separating devices, lift approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor integrated into the base frame for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! Vacuum supply: - 1 vacuum pump including a 250-liter tank for rapid vacuum build-up. - approx. 20 vacuum supports with various suction plates. - 4 stops raise/lower for positioning components. Miscellaneous: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser. Occupational safety: - Traveling safety cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axes to a new generation of drives (digital). - New energy chains for Y / X / Z axes. - Complete rewiring, all power and measuring system cables replaced. - All guide carriages replaced. - Z-axis ball screw and guide rails new. - X-axis guide rail new. - Control system conversion to BWO Vektor 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 tool magazines + tool changers overhauled. - Swivel extraction unit overhauled. Software: - It is possible to include a current version of the COMPASS stair construction software. Compass is the leading provider for planning and manufacturing of wooden staircases.

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3928 A, delovna širina: 250 mm, Oprema: dokumentacija / priročnik, Moč motorja: 30 kW Gujdpfx Aexix Tfja Ujg Opremljeno z: Hnebni Iow A A E Is Rp Tot 1+1 žagi 1+1 rezkalna skupina 1+1 vrtalna skupina Maksimalna dolžina: 1000 mm Maksimalna širina: 250 mm Maksimalna debelina: 50 mm dvojna čelilnica, dvojni vrtalni stroj, korak za korakom

Stanje: dober (rabljeno), Različni sesalni kolektorji, sesalni razdelilniki. Na voljo je samo sesalni kolektor C, podrobnosti si oglejte na fotografijah. Sesalni kolektor C: 140 evrov. Komponente si lahko po dogovoru za termin ogledate pri nas. Ponujamo samo stroje, ki so pripravljeni za demonstracijo in so shranjeni v našem skladišču, glejte »dodatne ponudbe tega ponudnika«. Godpfx Astp Hpboa Usug

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Novo tračno brusilni stroj za lesene plošče (vključno z izsesavanjem prahu) Gujdpfxsxxlz Uj Aa Ujg

Stanje: dober (rabljeno), Tračna žaga PEHAKA HS-820/820 Dolžina: 10.700 mm Širina: 67 mm Guodpotxlz Nsfx Aa Usg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Panel Saw SICAR Flash 3200 CE (1374) Specification: • Condition – used, after inspection • Manufacturer – SICAR • Model – FLASH 3200 CE • Sliding table length: 320 cm • Mounted saw blade diameter: 300 mm • Scoring unit with independent motor • Main saw motor power: 4.0 kW • Scoring motor power: 0.55 kW • Saw blade tilting angle set manually • Manual blade lifting and lowering • Side table dimensions: 100 x 60 cm • Extraction ports: 60 and 120 mm diameter • Weight: 700 kg • Year of manufacture: 2009 • Overall dimensions: 320 x 330 x 115 cm (W x L x H) • Transport dimensions: 100 x 330 x 115 cm (W x L x H) Gsdpfx Aowwli Esa Uoug Additional information: • Good original technical condition • Photos show the actual item for sale • Possibility to power up and inspect the machine on site

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, TIL OMGÅENDE LEVERING FRA VORES LAGER I DANMARK: DEMOMASKINE – MASKINE LEVERES MED ROBOT (ELLER UDEN EFTER ØNSKE) Generelt: • Samlet effekt: 52,36 kW • Strømforsyning: 380V / 50Hz / 3-faset • Luftforsyning: 0,6–0,7 MPa Godpfx Aasyhb I Rs Usug • Samlet vægt: 7.850 kg • Maskinstørrelse: 7.400 × 4.620 × 2.650 mm Styringssystem • Fabrikat: SYNTEC Pladestørrelse • Længde: 250 – 2.800 mm • Bredde (X/U): 250 – 650 / 1.200 mm • Tykkelse: 10 – 60 mm Maks. kørehastighed • X-akse: 135 m/min • Y-akse: 75 m/min • Z-akse: 30 m/min Transmissionsprincip • X-akse: Tandræk og tandhjul • Y-akse: Tandræk og tandhjul • Z-akse: Kugelejegevind Boreblokke • Antal boreblokke: Top 2+2 / Bund 1+1 Bor • Øvre lodrette bor: 19 × 4 • Øvre vandrette bor: X: 3 × 8 + Y: 2 × 4 • Nedre lodrette bor: 9 × 2 Borspecifikationer • Maks. bordiameter: Ø35 mm • Boringafstand: 32 mm • Omdrejningstal: 5.000 omdr/min • Skaftdiameter: Ø10 mm • Værktøjsholder: 4 × ER25 • Spindelkraft: o 2 × 3,5 kW o 2 × 5,5 kW o Maks. 18.000 omdr/min Spånudsugning • Antal: o Top: 4 × Ø200 mm o Bund: 2 × Ø125 mm • Luftstrøm: ≥ 28 m/min SUPPLERENDE OPLYSNINGER IFØLGE VEDHÆFTET PDF