LOS-1 STROJ ZA ROBOVE

IMA Novimat / I / G80 / 540 / R3

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 08420, skupna dolžina: 11.500 mm, največja debelina roba: 3 mm, skupna masa: 8.500 kg, priključek za stisnjen zrak: 7 letvica, Used single-sided IMA edge banding machine for straight edges, for jointing, edge banding, and post-processing of various edge materials. Fixed fence on the right side. Workpiece and Material Dimensions: - Min. workpiece length: 150 mm - Min. workpiece width: 65 mm - Min. workpiece thickness: 8 mm - Max. workpiece thickness: 40 mm (with corner rounding / copying) - Max. workpiece thickness: 60 mm (without corner rounding / copying) - Smallest workpiece: 150 x 150 mm or 300 x 65 mm - Workpiece overhang: 38 mm - Edge thickness min/max: 0.3 – 3.0 mm - Edge width min/max: 14 – 65 mm EQUIPMENT / SPECIFICATION - Base machine - Workpiece transport with 80 mm wide feed chain (chain plate width) - Feed speed 6 to 30 m/min, steplessly adjustable via input unit - Upper pressure with spring-loaded guide rollers and 70 mm wide composite timing belts - Automatic height adjustment (workpiece thickness) - Workpiece support with roller rails, extendable up to approx. 600 mm - IMA 63.152 infeed table, 500 x 500 mm, for safe and precise feeding of long and narrow parts - Manual infeed device, can be raised/swiveled, with 5 driven, inclined rollers from above - Adjustable infeed fence with NC axis UNITS / EQUIPMENT - Jointing Unit IMA 08.378, 2 motors each 4.5 kW, with engagement control, tool Ø 125 mm, electronic horizontal positioning - Gluing section 04.1570 Concept, driven glue roller with automatic stop in case of malfunction, quick-lock system for glue application unit, glue roller lift-off when feed stops, edge feed monitoring via fiber optics, pressure device with stepper motor adjustment - Automatic PUR melting system IMA 283.203 - Edge magazine with automatic 6-roll changer POST-PROCESSING SECTION: - End trimming unit IMA 08.42, horizontal working movement, 2 motors each 0.65 kW, 200 Hz, for straight and chamfered trimming, max. working speed 30 m/min - Fine milling unit IMA 08.055, 0.66 kW 400V 200Hz, top/bottom, HSK 25 - Corner rounding (copying IMA) 08.348, 2 motors 0.66 kW 400V 200Hz, HSK 25, max. working speed 20 m/min - Profile (radius) scraper 08.516, top/bottom, for multiple profile tools, automatic positioning via stepper motors, max. 4 profiles, electro-pneumatic engagement/disengagement - Spray device for cleaning agent - Flat scraper 08.521 (glue joint), top/bottom - Profile (corner) buffing unit 08.604, 4 motors - Buffing unit 08.617, top/bottom CONTROL / SOFTWARE: • Control system ICOS Open Compact • Edge tracking control • Uninterruptible power supply (UPS) • Power supply 400 V, 50/60 Hz, control voltage 24 VDC / 230 VAC Nsdpewyp Nuefx Adpewp Machine dimensions: L 1150 x W 300 x H 260 cm Availability: approx. October 2025

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, laserska moč: 6.000 W, najv. debelina pločevine: 25 mm, najv. debelina jeklene pločevine: 25 mm, teža obdelovanca (maks.): 800 kg, skupna masa: 5.000 kg, skupna dolžina: 5.000 mm, skupna širina: 2.500 mm, skupna višina: 2.200 mm, trajanje garancije: 12 meseci, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.500 mm, delovno območje: 3.000 mm, With the OR-S1530, Oree Laser offers a compact and user-friendly large-format laser cutting system. Our company, SF-Tech Engineering GmbH, is the official Swiss representative of Oree Laser. All machines are newly imported and assembled to customer specifications. Training and after-sales service are also provided by us. In our showroom, you can test the OR-S1530 together with all accessories (high-pressure compressor, extraction system, etc.). Technical Data Working area: 3060mm x 1530mm External dimensions: L: 4950mm, W: 2300mm, H: 2130mm Weight: approx. 4,500kg Positioning accuracy: 0.03mm Max. cutting speed: 115m/min Maximum acceleration: 0.8G Laser power: 6,000 Watts Nsdor D N Dzopfx Adpswp Laser source: MAX Cutting head: Raytool or BOCI Fume extraction: Zone-controlled extraction The side machine door can be easily raised or lowered at the push of a button. The total height of the machine is 2,200mm. The worktable can be slid sideways out of the machine by hand, allowing safe and efficient loading and unloading. There are now two versions available: 1. 60% pull-out table, without ground support, max. load capacity 800kg. 2. 120% pull-out table, with folding support arms, max. load capacity 900kg. Don’t hesitate to visit us in our showroom at 6281 Hochdorf.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 278 h, Max. workpiece size for re-milling X = 3620 mm; Maximum travel distances: X = 3865 mm Minimum room height 3.20 m Machining in Y and Z Y = 1600 mm; Max. panel width 2000 mm Maximum workpiece height 300 mm (measured from upper edge of vacuum suction cup 125 mm) MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured by dongle for the machine CabinetControl Base: Software for furniture design and production CAMPUS V7 PLUS: Software for CNC processing centers ADDITIONAL MODULE HIGH-SPEED MILLING Control Siemens industrial PC control Handheld controller for remote operation of the machine MILLING HEAD 5-axis head 7840, power: 12 kW n(max.) = 0–24,000 rpm, infinitely variable Gimbaled; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable Liquid cooling (cooling unit included) with HSK-F 63 tool holder Max. tool weight: 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster to increase standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles, individually selectable L-shaped arrangement, 11+2 in X, 6 in Y direction, 32 mm pitch n (max.) 1,000–5,710 rpm, infinitely variable 6 horizontal spindles 2 double drill spindles in X direction 1 double drill spindle in Y direction including saw unit Integrated saw unit for sawing/grooving in X direction n(max.) 1,000–7,330 rpm, infinitely variable MACHINE TABLE Machine table: 6 consoles, pneumatically clamped, movable in X direction Display and assignment of consoles and suction cups in the software 2 side stops field A and D, 2 large-area buttons for clamping and releasing workpieces, 2 tape measure displays for positioning the consoles in X, referenced to stop field A/D, tape measure displays for suction cups on each console in Y, referenced to the rear stop STOPS 2 additional machining fields in front for 6 consoles (4-field machining) 4 pneumatically controlled stops per field, including 1 stop per console and one side stop in X direction per field FEEDING AIDS 4 pneumatically liftable and lowerable feeding aids for easy handling of heavy parts TOOL CHANGER Tool changer 7996, 18-position magazine (carousel) travels automatically in X direction Traveling tool changer 7886, 1-position saw blade magazine Specially designed for large saw blade diameters up to 350 mm Pick-up system installed on the gantry, pneumatic Max. tool Ø: 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running compressor LED light for the machining area. SAFETY OPTIONS Safety enclosure according to CE standard Protective fence on the side and rear CONFIGURATION VARIANTS AND ACCESSORIES LUBRICATION Nodpfjxfaf Ujx Adpowp Automatic central lubrication Gantry extension – ideal for 4-field machining and large workpieces 2 controlled pneumatic modules for up to 5 frame clamping elements per field (A/D) Each module can control up to 5 frame clamping elements simultaneously. Simultaneous opening/closing of connected clamping elements; includes foot pedal for operation, max. 2 per field A and D can be ordered OPTIONAL: LASER – laser pointer, consisting of two laser pointers for positioning the vacuum suction cups.

Stanje: zelo dobro (rabljeno), Single-sided edge banding machine (LEFT) Edge thickness (tape, min/max) mm: 0.3 - 3 Edge thickness (solid strips min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: Driven by V-belt Sprayer unit (for liquid non-stick agent) Jointing milling unit 08.376 (2 x 3 kW) Nodpfod Nuu Hjx Adpjwp Gluing unit (hot melt adhesive) 283.1513 Pressure zone for edging Edge magazine for tape (compartment no.): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and profile milling) 08.342 (2 x 0.66 kW) servo-controlled Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Stanje: dober (rabljeno), Leto izdelave: 1993, obratovalne ure: 604 h, Generator je v dobrem stanju, nahaja se na zalogi. Nwsdovkvvqopfx Adpjp

Stanje: rabljeno, številka stroja/vozila: 008018, Tip pritrjene obrobe: tanka obroba, močna obroba, masiven les Lepilni sistem: EVA, PUR Spojno rezkanje: da Nwedpfx Ajwv Dfcodpop Multifunkcijska enota: da Maks. podajalna hitrost: 20 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 7 kos

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 6.164 h, Doppstadt IDC000123 - proizvajalec: Doppstadt - model: DZ 750 Kombi - leto proizvodnje: 2009 - bruto masa vozila: 46.000 kg - delovne ure: 6145 Nwjdpfjvy S Dpsx Adpsp

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) Nedpjvvkfdsfx Adpewp BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Stanje: dober (rabljeno), Manufacturer: ESTARTA Model: 301 MV Condition: Used Nwodpfx Ador Ezfpepep Stock number: 4576 Location: Badajoz, Spain Dimensions: 1520 x 1020 x 1260 mm Weight: 1,550 kg Gap between wheels: 1.5 / 50 mm Max. grinding wheel width (plunge grinding): 125 mm Working wheel dimensions (OD x ID x width): 300 x 125 x 175 mm Min. external diameter of working wheel: 220 mm Max. profile depth of working wheel: 8 mm Regulating (driving) wheel dimensions (OD x ID x width): 220 x 125 x 125 mm Min. external diameter of regulating wheel: 165 mm Max. profile depth of regulating wheel: 8 mm Grinding wheel motor power: 7.5 kW Regulating wheel motor power: 0.75 kW Work head swiveling angle: +/- 5°

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse Nwedpfxet R T Hco Adpop 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener