Ima Hka nakup rabljenega (143)

Stanje: zelo dobro (rabljeno), 5-axis (X-Y-Z-C-5) CNC machining center for milling, drilling, cutting, and edge banding. Gantry design – safety tread mats. PC control type: ICOS OPEN CNC – IMAWOP software. Worktable: console table (No. 8 console tables, each 1400 mm). Console tables with LED / diode light strips. Automatic tool change system (magazine – 18 tool positions). Working area (X-Y-Z): 4000 x 2100 x 300 mm. Working area for edge banding (X-Y-Z): 4000 x 1800 x 60 mm. Gijdpfx Aohu U Nxea Ueu No. of working zones: 2. Vacuum pump / capacity (m³/h): 140. Chip conveyor. Separate electrical and control cabinets. Total connected load (kW): 32. Working units (top): - 21 independent vertical drilling spindles (4 x 1.2 kW) - 1 vertical main spindle (milling unit) HSK 63 ROBOT (16 kW) - Edge banding unit (hot melt glue) VT 100. Edge material (rolls): thickness (min/max): 0.4 / 3 mm. Edge magazine for rolls (2 compartments). OPTIONS: - Saw unit, max diameter 200 mm. - Combination unit (flush milling & profile scraper). - Drilling head (with 4 horizontal drilling spindles).

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edgebanding material (coils) thickness (min/max) mm: 0.3 / 3 – Edgeband thickness in strips / tapes max mm: 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control/Software: ICOS Open (Windows based) Feed speed (adjustable) m/min: 10 - 50 (Master & Slave) Protective and noise reduction cabins FORMATTING SECTION (for each side): Pre-milling cutter (pre-milling) 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) Max 35 m/min Jointing milling unit 75.186 (1 x 4.4 kW) Gedpjxggzlsfx Aa Uoiu EDGEBANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) VTG 3-24 + 283.203 Pressure zone + edge magazine for rolls (slot no. 24) End trimming unit 08.42 / 30 / B (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling/milling unit 08.055 (2 x 1 kW) 0°-30° (30 m/min) Multifunctional unit (radius & contour milling unit) MFA 08.342 (2x0.66 kW) SERVO Max 20m/min OPTIONAL: KFA 30 Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.604 (0.25 kW x 4) 2 x standard milling units for grooving/rabbetting (1x left + 1x right) 08.190 (4.5 kW x2) 90°/180°/270°

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness for rolls (min/max) mm: 0.4 / 3 Edge thickness for strip veneer (max) mm: 1.3 Panel thickness (min/max) mm: 10 / 45 Working width (min/max) mm: approx. 244 / 2300 Control/Software: ICOS Open Feed speed (m/min): 8 - 40 No transmission bar (Master & Slave systems) Safety and noise protection enclosure Gedpfofi Tkvjx Aa Ueiu Retractable alignment stops, distance (mm): 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. adhesive + premelter) 04.1570 + 283.205 Edge magazine for rolls (compartment no. 6) End-trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°-30° Multifunction unit (radius milling and profile trimming) MFA 08.342 (0.66 kW x 2), max 25 m/min Profile trimming unit (copying) 08.465 (0.18 kW x 4), max 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free bay

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINES – First (1st) machine in line Edge thickness from coil (min/max) mm Edge thickness in strips (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Control/software ICOS open Feed speed (adjustable) m/min 9 - 45 No transfer bar (master & slave systems) Pressure belt driven by V-belt FORMATTING UNIT (for each side): Gsdpfx Aasfi Tkge Ujiu Jointing/milling unit 75.30 (kW 6.6 x 1) EDGE-BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1569 + 283.205 Pressure rollers (turret) for straight and softforming edges mm 1,050 Edge magazine for coils (number of slots) 6 End trimming unit 08.42 (kW 0.2 x 2) 40 m/min Pre-milling unit 08.055 (kW 0.66 x 2) 0°-30° Milling unit 08.0582 (kW 0.66 x 2) 0°-30° Scraper unit 08.50 Buffing unit 08.617-2 (kW 0.18 x 2)

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control unit: ICOS Open Feed speed m/min (adjustable): 16 - 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable stop ruler, CNC controlled Jointing unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) VTG + 283.203 Gijded Scydopfx Aa Ueu Edge magazine for rolls (number of compartments): 6 End trimming unit 08.42/30/B (Kw 0.2 x 2) max 30 m/min (0°-25°) Milling unit 08.0587 (Kw 1.0 x 2), 4 profiles Multifunctional unit (radius and contour milling) KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 08.190 (Kw 4.5 x 1) 90°/180°/270° CNC

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING MACHINE Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 12 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Control system: ICOS OPEN Feed speed m/min (adjustable) 6 - 30 No transmission bar (Master & Slave systems) Top pressure driven by V-belt Sprayer unit (for liquid anti-stick agent) Jointing milling unit 08.376 (4.5 kW x2) Free position Glue application unit (hot melt glue) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 2 End trimming unit 08.42 (0.66 kW x 2) 0°-25° Milling unit 08.055 (1 kW x 2) 0°-30° Multifunctional unit (radius and profile milling unit) 08.342 (0.66 kW x 2) Gedpfx Aajd Rcige Ueiu Profile scraper unit 08.519 Flat scraper unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612 Free position (for grooving/rabbetting unit)

Stanje: rabljeno, Complete factory for furniture production, comprising: SZ0M23) Angular panel saw "GIBEN" Type 17 (mm 5700x2700) with stacking system "SIRIO" SZ0M25) Panel saw "GIBEN" Mod. GammaDue (mm 3800x2200) SZ0M26) Panel saw (multi-blade saw) "GABBIANI" (finished panels mm 4250 x 2120) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (film lamination/glue on paper) SZ0M29) Press line "COLOMBO REMO" (mm 1400x9600) for paper/veneer/laminated materials SZ0M30) Press line "FRIZ" (mm 1400x6200) for paper/veneer/laminated materials SZ0M41) Double-sided edge banding and sizing line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided edge banding and sizing line "IMA" Combima Softforming with a second double-sided edge banding and sizing machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with splitter "NARDELLO" Mod. Elegance SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed system and stacker "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and winding machine "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cross-cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Pre-assembly line for honeycomb panels SZ0M18) No. 6 multi-opening press "COLOMBO REMO" (mm??x mm??) SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI+ELMAG+ COSTA LEVIGATRICI" Gjdpfxjcr U Ure Aa Ueiu Many other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, racks (wall-mounted shelving), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Stanje: zelo dobro (rabljeno), One-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips/lippings (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control ICOS open TS Feed speed m/min (adjustable) 4 - 20 Upper pressure with V-belt drive Sprayer unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3 kW) Gluing unit (Hot Melt glue) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 Gisdpjflc Uhsfx Aa Uju End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-functional unit (radius milling and contour milling unit) 08.342 (2 x 0.66 kW) Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Stanje: kot nova (razstavni stroj), SINGLE-SIDED EDGE BANDER (LEFT) Edge thickness on rolls (min/max) mm 0.3 / 3 – in lippings/strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Pressure belt driven by V-belt Spray unit (for liquid non-stick) Adjustable fence, CNC controlled Panel feeding system 700.101 (mm 500 x 500) Jointing milling unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo-motor), adjustable via CNC Gluing unit (premelter with laser) Laser system IMALUX Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments No.) 6 Linear end trimming unit 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Giedpsgbug Njfx Aa Uou Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining centre for milling, drilling, cutting, and edgebanding Control: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area for edgebanding (X - Y - Z) mm: 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) - 1200 mm LED setup assistance for vacuum cup (sleeve) positioning (Y-axis) Gsdpfx Aefbmqtea Uoiu 1 vacuum pump (capacity 140 m³/h) Safety enclosure for working head, safety foot mats Chip conveyor No. 2 vertical main spindles (milling units), HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (disc changer) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit – gluing module (hot melt glue) VT 50 Edge magazine for rolls (6 compartments) OPTIONAL: 1 adapter unit for saw, fixed 90 degrees, max diameter 200 mm 1 adapter unit for flush milling and profile pull blade 1 adapter unit horizontal drilling & milling head (cross head) with 4 horizontal spindles

Stanje: zelo dobro (rabljeno), Single-sided edge banding machine (LEFT) Edge thickness (tape, min/max) mm: 0.3 - 3 Edge thickness (solid strips min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: Driven by V-belt Sprayer unit (for liquid non-stick agent) Jointing milling unit 08.376 (2 x 3 kW) Gjdpsd Nuu Hjfx Aa Usiu Gluing unit (hot melt adhesive) 283.1513 Pressure zone for edging Edge magazine for tape (compartment no.): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and profile milling) 08.342 (2 x 0.66 kW) servo-controlled Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Gjdom Udfwspfx Aa Ueiu Edge Material (Rolls) Thickness (min/max) mm: 0.3 - 3 Edge Thickness in Strips (min/max) mm: 1 Panel Thickness (min/max) mm: 8 - 60 Control Unit: ICOS Open Compact Feed Speed m/min (adjustable): 6 - 30 Top Pressure: Belt-driven Spraying Unit (for liquid non-stick agent) Adjustable Fence, CNC controlled Pre-milling Unit with CNC control 08.378 (2 x 4.5 kW) Lamps for panel side heating Gluing Unit (Hot Melt Glue + pre-melter) 04.1570 Spraying Unit (for separating fluid) Edge Pressure Zone Edge Magazine for Rolls (compartment no.): 16 Cross-cutting Unit 08.42/30/B (2 x 0.66 kW - Pneumatic 0° - 25°) 30 m/min Multi-profile Milling Unit (CNC controlled) 08.0587 (2 x 1 kW) Spraying Unit (for sliding fluid) Contour Trimming Unit (for fine trimming) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Shaping Copy Milling Unit 08.604 (4 x 0.25 kW) Spazzola Multi-profile Scraper Unit (CNC controlled) 08.516 Flat Scraper Unit 08.521 Spraying Unit (for polishing fluid) Buffing Unit 08.617-4 (4 x 0.18 kW) Surface Smoothing Unit 08.53

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: toothed belt driven Adjustable fence: CNC controlled Jointing unit with CNC-controlled 08.376 (kW 4.5 x 2) Lamps for workpiece edge heating Edging station (Hot Melt + pre-melter) 283.1513 + 283.201 Gisdpfxjidqpho Aa Uou Edge pressure zone Edge magazine for rolls (compartment No.): 1 End trimming unit 08.42 (kW 0.66 x 2), max 30 m/min, 0°-25° Milling unit 08.055 (kW 1.85 x 2) 0°-30° Spray unit (for sliding liquid) Contour milling unit (for fine trimming) CNC controlled 08.348 (kW 0.66 x 2) 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Spray unit (for polishing liquid) Buffing unit 08.612-2 (kW 0.25 x 2) Universal milling unit for grooving/rebating and profiling 08.183 (kW 3 x 1)

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edge) thickness (min/max) mm: 0.3 / 3 Veneer edges possible in a limited way up to max. 1.0 mm Panel thickness (min/max): 8 mm / 40 mm (with MFA) / 60 mm (without MFA) Control/software: ICOS Open Feed speed (adjustable) m/min: 6 - 30 Top pressure system with motorized timing belt Spraying device (for liquid anti-stick) Adjustable fence Jointing cutter unit - 08.378 (2 x 4.5 kW) Gluing unit (Hot Melt glue) 04.1570 Pressure zone Edge magazine for rolls (compartment no.): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max. 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and contour trimming unit) 08.342 CNC controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Universal milling unit for grooving/rebating and profiling 08.190 (1 x 4.5 kW) Giedor Ttflspfx Aa Ueu

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Gantry design, equipped with ICOS-Open control system. Software: IMAWOP + IMAwinCAD. Set-up table with consoles. Number of consoles: 6 (1450 mm) DYNAPOINT Automatic positioning of consoles (X-axis) Automatic positioning of vacuum clamps (Y-axis) Automatic tool changer – 18 tool positions Gsdpfxstixpue Aa Uoiu Max. working area (X-Y-Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and control panel. Total connected load: 34 kW WORKING UNITS (TOP): No. 1 vertical main spindle (milling unit), HSK F63, drive power: 18 kW (S6) Fixed 90° saw, diameter 200 mm Edge banding unit (installed on the machine) VT 100 2-fold coil magazine Combi-unit (flush-trimming/profile scraper) Feed system with brush table No. 6 clamps for securing and moving the panel on the machine vacuum cups Workpiece outfeed with motorized rollers and angle transfer system

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH-SIZE-ONE PRODUCTION AND SINGLE-SIDED EDGEBANDING & FORMATTING LINE Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE Gijdpfx Ajkt Uuasa Ueu M.02) SINGLE-SIDED (right) FORMAT AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Coil material (edges) thickness (min/max) mm 0.3 / 3 Control/software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 jointing milling units with CNC control 08.378 (4 motors x 4.5 kW) Gluing unit (Hot Melt adhesive + pre-melter) VTG + 283.205 Edgeband magazine for coil material (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Premilling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (CNC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine milling) CNC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating, and profiling 08.190 (3 x 4.5 kW) CNC controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO"

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + premelter) 283.201 + 283.203 Godpfx Aoi Hn Srea Usiu Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) for edge banding (mm): 3100 x 1925 x 60 No. 6 clamping tables with consoles (number of consoles) - mm 1400 LED set-up aid for vacuum cup positioning (Y-axis) No. 1 vacuum pump (capacity 250 m³/h) Operator protection cabin for working head, safety tread mats Gsdeq Nmutepfx Aa Ueiu No. 1 vertical main spindle (milling unit) HSK F63 (18 kW) Automatic tool changer (carousel type) with 18 tool stations No. 14 independent vertical drilling spindles (2 x 1.2 kW) Cross aggregate with 4 horizontal drilling spindles + grooving saw (max. diameter 125 mm) Edgebanding unit – gluing station (hot melt glue) VT 100 No. 2 edge magazines for rolls OPTIONS: No. 1 adapter unit “FLEX 5” model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraping blade No. 1 barcode reader

Stanje: zelo dobro (rabljeno), EINSEITIGE KANTENANLEIMMASCHINE (LINKS) Kantendicke im Rollen (min/max) mm 0,3 / 3 Kanten Dicke in Leisten / Streifen (min/max) mm 0.8 / 20 Gsdjyk Tkvepfx Aa Ujiu Platten Dicke (min/max) mm 8 / 60 Steuerung ICOS Open Vorschubgeschwindigkeit m/min (regelbar) 6 - 30 Oberdruck keilriemen angetrieben Schutz- und Schallschutzkabinen OPTIONAL: Panel-Einführungssystem 63.152 (mm 500 x 500) Verstellbares Anschlaglineal C.N gesteuert Fügefräsaggregat mit CN-gesteuerte 08.379 (Kw 4,0 x 2) Kanten Druckzone (CN-gesteuerte) Verleimteil (Hot Melt Leim) 283.1513 Kantenmagazin für Rollen (fach N°) 1+2 Kappaggregat 08.42/30/B (Kw 0,66 x 2) max 30 m/min (0°-25°) Fräsaggregat 08.055 (Kw 1,85 x 2) 0°-25° Multifunktionsaggregat (Radiusfräsen und Formfräsaggregat) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profilziehklingenaggregat 08.519 Flachziehklingenaggregat 08.521 Sprayeraggregat (für Polierflüssigkeit) Schwabbelaggregat 08.617-2 (Kw 0,18 x 2)

Stanje: zelo dobro (rabljeno), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTER (POINT-TO-POINT) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z-axis travel 650 mm) Maximum working area (X - Y - Z) for edge banding (mm): 4000 x 1600 x 100 No. 8 clamping tables with consoles (number of consoles) – 1400 mm LED setup assistance for vacuum cup (socket) positioning (Y-axis) Gsdpfxjw A Ruqo Aa Ujiu No. 2 vacuum pumps (capacity 140 m3/h) Safety enclosure for machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (rotary magazine) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivels 90° in X-Y direction), diameter 200 mm Edge banding unit (PUR glue + pre-melter 283.203) VT 100/100 WITH 45° SWIVEL EDGE BANDING UNIT No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 - 3 mm Panel thickness (min/max): 8 - 60 mm Control: ICOS open compact Feed speed (adjustable): 6 - 30 m/min Pressure belt, driven – with spraying unit (for liquid anti-adhesive) Gjdpfx Aajltmnls Ujiu Panel feeding system: A1 / 15 Adjustable fence – CNC controlled, panel infeed system Barcode reader Joint trimming unit with CNC control 08.379 (2 x 4.0 kW) Radiator for workpiece edge heating Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressure zone. Edge height setting – CNC controlled. Edge magazine for rolls (number of compartments): 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding agent) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free slot Universal milling unit for grooving, rebating, and profiling 08.190 (4.5 kW x 1)

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge Thickness in Rolls (min/max) mm: 0.3 / 3 Edge Thickness in Strips (min/max) mm: 3 / 12 Gijdpfx Aed Nt N Hsa Uou Panel Thickness (min/max) mm: 8 / 60 Control: ICOS open TS Feed Speed m/min (adjustable): 4 - 20 Top Pressure: V-belt driven Spraying Unit (for liquid anti-adhesive) Adjustable Fence, CNC controlled Jointing Milling Unit 08.379 (2 x 4.0 kW) Gluing Unit (Hot Melt Adhesive & PUR Glue) 283.1513 Pressure Zone for Edges (CNC-controlled) Edge Magazine for Rolls (compartment no.): 1 End Trimming Unit 08.415 (2 x 0.66 kW) Pre-Milling Unit 08.055 (2 x 1.0 kW) Form Milling Unit (Copying) SKF-L (CNC) 2 x 0.18 kW + 2 x 0.4 kW Profile Scraper Unit 08.519 Flat Scraper Unit 08.521 Buffing Unit 08.617-2 (2 x 0.18 kW) Universal Milling Unit for Grooving/Rabbetting and Profiling 08.190 (1 x 4.5 kW) 90°-180°-270° OPTIONAL: Infeed Table 65.152 (mm 500 x 500) The Return Conveyor "GELDMEIER" Mod. ? (Ref. No. Z02009)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 8 – 60 Control unit: ICOS open Feed speed m/min (adjustable): 7–35 Upper pressure: V-belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler: CNC controlled. Panel infeed system: A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing station (P.U.R. adhesive + premelter) 2 – VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments No.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°–25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spraying unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Gjdpfoifnzdjx Aa Ueiu Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spraying unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rabbeting and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Giodpfx Aaeyypi Uj Usu Edge thickness in strips (min/max) mm: 0.4 / 1 Roll material (edge) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control system / Software: ICOS Open (Windows XP) Feed speed (adjustable) m/min: 10 – 50 No transmission bar (Master & Slave systems) SIZING UNIT (per side): Sprayer unit (for liquid non-stick agents) Milling unit (2 x 8 kW) EDGE PROCESSING UNIT (per side): Gluing station (hot melt glue + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (compartment no.): 6 Servo-drive guillotine shear (for cutting the edge material) Pressure zone (CNC-controlled) Premilling unit 08.055 (2 x 1 kW) 0°-30° Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.617-2 (2 x 0.18 kW) Sprayer units (for polishing fluid) Universal milling unit for grooving, rebating, and profiling – 08.190 (1 x 4.5 kW) 0°-90° / 180°-270°

Stanje: zelo dobro (rabljeno), 4-sided SIZING AND EDGE BANDING LINE + THROUGHFEED BORING MACHINE Consisting of the following machines: Giodpfxeyyb Sus Aa Usu A) "IMA" loading system (bridge design) with double pick-up station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for supplying panel stacks to the loader. B) 1st double-sided sizing and edge banding machine "IMA" model Combima/N/II/230/A/R3 (mm 1300) C) Panel turner (from longitudinal to transverse orientation) "IMA" D) 2nd double-sided sizing and edge banding machine "IMA" model Combima/II/740/B/R3+ (mm 3300) with KFA 30 (contour trimming unit for fine trimming) E) Throughfeed boring machine "IMA" model I-Magic (with 2 horizontal and 4 lower vertical boring supports) F) Motorized roller conveyor "IMA" G) Panel turner (from transverse to longitudinal orientation) "IMA" H) "IMA" stacking system (bridge design) with double stacking station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for transporting panel stacks away from the unloader.