ENOSTRANSKI ROBNA LEPILKA

IMA Advantage 70

Stanje: dober (rabljeno), Leto izdelave: 2011, Internal flange dimensions: 2340 x 1340 mm Maximum panel size (thickness 20 mm): 2340 x 1240 mm Working chamber height: 60 mm Total pressing force: 300 t Maximum specific working pressure: 5 kg/cm² Press cylinders: No. 6, diameter 140 mm, stroke 250 mm Nodpfx Astwba Ssnrecw Lower movable platen (upward closing movement) Opening between press platens: 230 mm Loading side: 1400 mm PVC roll unwinder Double loading table

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Ncedpfx Ansfi Tg Herow Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: novo, Leto izdelave: 2026, Za profesionalno in natančno doziranje količine lepila v izvrtinah za moznike in utorih zadnjih sten. Ncodpfodxz Tpox Anrjw Kratek opis: • Vedno enaka in pravilna količina lepila • Ni potrebno naknadno čiščenje obdelovancev zaradi preveč lepila • Enostavno in minimalno čiščenje lepilnega sistema (1x tedensko, prek programa za izpiranje) • Prihranek pri stroških lepila • Ergonomska in lahka lepilna pištola v primerjavi z lepilnimi steklenicami • Hitrejše in natančnejše delo v primerjavi z lepilnimi steklenicami

Stanje: novo, lastna masa: 900 kg, največja dovoljena obremenitev: 1.600 kg, skupna masa: 2.500 kg, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 2.300 mm, velikost pnevmatike: 195/55r10c, Robust and high-quality sales trailer as a flatbed high-loader for snacks or merchandise. Nedpfxjpfb Nyj Anrscw Our *SELLERH* series snack trailers feature an insulated sandwich construction. The sturdy steel frame is welded and hot-dip galvanized in a bath, ensuring high stability. The door is equipped with a lockable steel latch, *not plastic*. The *box body* consists of 25 mm polyester sandwich panels in white. The *car trailer* has four crank supports for leveling the *snack trailer*. A cost-effective *car trailer* suitable for markets, snack sales, cocktails, fast food, non-food, street food, merchandise sales, and more. Standard equipment overview: *Lockable entry door with steel latch*, *step on drawbar*, *sales hatch on the right* with interior locking gas struts, electrical distribution panel, sturdy *crank supports*, *25 mm sandwich body* in white exterior, maneuvering handles, jockey wheel with bracket, robust *welded frame*, and a highly stable V-drawbar, hot-dip galvanized. Optional accessories for our *sales trailers* include additional *hatches*, *tarpaulins*, *shelf pockets*, sales counters, cabinets, sinks, *PVC flooring*, *100 km/h shock absorbers*, and *trailer locks*.

Stanje: rabljeno, Leto izdelave: 2021, Numerical control MEGA 300 TS Panel height 60 mm PVC/ABS up to 3 mm Feed speed up to 22 m/min Electronically adjustable working height via CNC Motorized pressure belt with increased pressure Infeed system for small panels Panel support guide with electronic CNC adjustment Side roller conveyor with idle rollers for panel support Anti-adhesive unit Straightening unit with two electronically adjustable CNC motors Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA adhesive with glue tank and premelter Pressure roller group for straight profiles with electronically adjustable CNC pressure rollers Anti-adhesive group Milling unit with 2 motors and automatic tilt adjustment End trimming unit with 2 vertically stacked motors Trimming/corner rounding group with 2 tilting motors electronically adjustable via CNC Corner rounding unit with 4 motors Edge scraper unit electronically adjustable via CNC Glue scraper unit Njdpfxot Hal Do Anrjcw Oscillating brush unit Hot air dryer unit

Stanje: rabljeno, številka stroja/vozila: 006279, Delovno območje os X: 3100 mm Delovno območje os Y: 1250 mm Delovna površina: gnezdilna miza Nodpfx Anskw H Eksrocw Število krmiljenih osi: 3 osi Število vrtalnih vreten: 11 Število mest za orodja: 8

Leto izdelave: 1995, stanje: dober (rabljeno), številka stroja/vozila: 044092, Offer 22148 Technical Specifications: - Grinding wheel diameter: approx. 200 mm - Grinding wheel width: approx. 25 mm - Grinding wheel bore: approx. 51 mm - Wheel speed: 1450 rpm - Drive: 400 V / 0.7 kW Ncedoiba R Njpfx Anrow - Space requirement: approx. W 600 x H 400 x D 350 mm - Weight: approx. 30 kg - Bracket for wall mounting

Stanje: rabljeno, Leto izdelave: 2016, Mitre plate saw with automatic pre-tensioning and double pusher system for optimized cutting OSI Plus numerical control OS Labeling – onboard labeling unit with graphical marking of parts including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Powered feed rollers for side loading via lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of disposable (sacrificial) boards based on specified thickness data in the machine parameters Low stack stop Automatic side loading. Includes: containment fences, twin photocells, pushbutton panel, electrical preparation for the two powered infeed roller conveyors, plus reinforcement with 4 rollers instead of fork passages on the infeed conveyor Intermediate roller conveyor Side loading roller conveyor measuring 3800 x 2200 mm with powered rollers (floor-to-conveyor height 325 mm) Gravity conveyor for longitudinal offcuts to corner station 4500 mm (total length: 7295 mm) 3000 mm conveyor extension for crosscut offcuts Long chute for manual crosscut transportation to the central gravity conveyor Air-cushion outfeed table 2050 x 850 mm, front side equipped with wheels Air generator for up to 6 air-cushion table decks MULTIPUSHER 2.4 System with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows reduction of the minimum panel length to be crosscut from 1830 mm to 1220 mm Automatic device for detecting blade shaft flexure in angular cuts (longitudinal and cross axes), consisting of a sensor for direct deflection measurement on the blade shaft and a device for recording saw blade revolutions directly at the chuck Remote-cycle start keypad Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main sawblade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Saw carriage speed: 1–140 m/min (servo motors) Longitudinal pusher carriage speed: 90 m/min Cross pusher carriage speed: 135 m/min Double shuttle carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed + 2 on the Multi-Pusher cross carriage) Nsdpfeuc Idxex Anrocw Cutting system for thin panels

Stanje: dober (rabljeno), Koda: 0136 Znamka: ITALPRESSE Model: FORMATIC 20.9 Hidravlična membranska stiskalnica Obojestransko lepljenje furnirja na panele, ki so na eni strani oblikovani ali profilirani, na drugi pa ravni – za lepljenje vhodov na omarice, čelne stranice predalov, pisalniške in konferenčne plošče, kuhinjske delovne plošče ipd. 3D lepljenje plastičnih folij (PVC, PPE, ABS, transfer folije) na panele, ki so oblikovani ali profilirani na eni strani – za izdelavo vrat omaric, čelnih stranic predalov, pisalniških in jedilnih površin, kuhinjskih pultov, prodajnih pohištvenih elementov, notranjih vrat itd. Dimenzije plošče: 2000 x 900 mm Razmak (daylight): 325 mm Hod cilindra: 325 mm Grelec – električni kotel: 27 kW Tlačna sila: 300 ton Število tlačnih cilindrov: 3 Moč hidravlične enote: 5,5 kW Manometer za kontrolo tlaka Avtomatska ponastavitev tlaka Časovnik odpiranja Skupne dimenzije (DxŠxV): 3300 x 1400 x 2400 mm Njdpfxepbvqve Anrjcw Teža: 8100 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, model krmilnika: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-scoring saws, and a patented central angle retracing system which reduces cycle times by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor rated at 18.0 kW. For further information on this panel saw, please contact us. Nodpfoyaiiysx Anrocw Additional Equipment • Air cushion table with roller elements 2160 x 650 mm: 4 units • Central blower: 1 unit Machine Advantages Quality-related advantages • CE-certified, GS-certified, FPH wood-dust certified • Divisions: 75/275/475/1050/1850/2650/3450 mm measured from the angle stop to the center of the clamp • Possibility to mount 2 additional two-finger clamps • 4 manual alignment fences on clamps • Possibility to mount 1 additional single-finger clamp • Air cushion table nozzle spacing: 70 x 70 mm Technical advantages • Scoring saw motor: 2.2 kW • Operating voltage: 400 V / 50 Hz • Electrical connection value at HS motor: 18.0 kW = 24 kW, 21.0 kW = 27 kW • Positioning accuracy: +/- 0.1 mm/m • Gentle material transport, permanent positioning accuracy, no lubrication required, high program pusher speed, maintenance-free, full stability of the steel table retained, easy and cost-effective replacement of phenolic resin plates, minimal cylinder wear, uniform pressure application, minimal trim cut, significantly reduced cycle times, top cut quality, minimal setup times, cycle time reduction, electronically adjustable pressure force • Cutting length: 4300 mm • Cutting width (program pusher travel): 4250 mm • Roller conveyor (10-track element): 1 unit • Roller conveyor (2-track element): 5 units • Clamps: 7 units (first 3 are two-finger, remaining are single-finger) Additional Information Machine still under power.