Okovje center nakup rabljenega (4)

Stanje: nepreverjeno (rabljeno), Skladišče okovja da_da Lrsdpfeyn R Iysx Ahusn Striffler miza za okensko krilo z okovjem ----- - z avtomatskim vijačnikom in dovajanjem vijakov - Regal za okovje - Preša za okovje Roto (tehnični podatki po navedbah proizvajalca, brez garancije!)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2018, Fitting support included Working width: 3000 mm Swivelling: no Eder + Mueller sash mounting table ----- Sale on behalf of customer, ex customer location. Machine was in use until recently, now located at customer's warehouse. Previous hardware: Maco Multi Matic (other hardware types possible) Technical manufacturer’s description: ----- Table height and working angle mechanically adjustable with permanently mounted fitting support Sash mounting table, length 3,000 mm, with fixed fitting support Support surface with felt covering 12 swivelling counter holders for suspending the sashes Hardware scanning for centred and constant gear position 1 shelf, 4-fold air connection with automatic special screwdriver with pneumatic depth stop Lsdpjxmamuefx Ahuern 6-position turret stop for different screw depths pneumatic height adjustment for 6 screw levels automatic screw feed manual insertion for second screw length Dimensions: Length approx. 3,500 mm, depth approx. 2,200 mm, height approx. 2,100 mm ----- Price for the above-mentioned machine on request! ----- (technical data according to manufacturer – no guarantee!) All prices quoted are net, plus statutory VAT.

Stanje: novo, Fitting Storage yes Working width 3000 (3500) mm Swivelling yes Ruchser RU-BM-3000 (Option: 3500) Sash Assembly Table ----- Manufacturer Description: Pos. 1.0 Item 0610000 RU-BM-3000 Sash assembly table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver, length 3000 mm, width 1400 mm, work platform inclination manually adjustable. Usable width 2500 mm Holder for fitting shears or fitting punching tools. 10 swivel-mounted supports for hanging the sashes, completely pneumatically foldable for unobstructed movement of the sashes on the table surface. Device for sensing sash fitting length for constant and variable/central handle position and any handle height for already pre-drilled sashes, colour marking for fitting measurements. Support height adjustable at one stop to either 50 or 60 mm. RU-SH, special screwdriver with pneumatic depth control mounted on trolley, safety control system, pneumatic height adjustment, screw feeding device with automatic stop of the filling hopper manual feed for a second screw length at the special screwdriver, accessories. RA-8, turret stop for 8 screw levels mounted on the trolley. RA-4, support rail manually adjustable in depth to the left and right with one 4-position turret stop on each. PSF – Pneumatic clamping device for sashes against the side stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, gliding, or brush strips are required as support. Pos. 1.1 Item 6315 RU-BM-... fitting configured as per customer specification Pos. 1.2 Item 0500000 Mounting bracket matched to customer punch/ shears. For installation of a customer-supplied fitting punching tool or fitting shears (third-party make) on the sash assembly table. Please specify manufacturer when ordering!!! ----- Price RU-BM-3000 as described above ex works: on request! ----- Options for fitting storage for RU-BM-3000: ----- Variant: Fixed mounted fitting storage: Price €5,468.00 Item 0630000 RU-BL-30/30 Fixed mounted fitting storage mounted above the sash assembly table Length 3100 mm, depth 1250 mm, with 3 shelves each with 10 compartments separated by partitions. Variant: Free-standing fitting storage: Price €6,017.00 Item 0710000 RU-SBL3000/30 Free-standing fitting storage, Lsdpfxot Tq Aas Ahuorn length 3100 mm, depth 1250 mm, height 2050 mm, frame structure on the front side without supports, 30 compartments, in one row each 10 units separated by partitions and one continuous top shelf, compartment dimensions: width 280 mm, height 150 mm. 4 angle shelves for corner drives: Price €609.00 Arm length 120x120mm; angle approx. 3° Front edge of the angle is bent up 5 mm to prevent accidental unloading. 2 units left and 2 units right under the first shelf of the fitting storage. ----- Additional cost for RU-BM-3500 ----- Item 0610300 RU-BM-3500 Sash assembly table for sashes up to max. 3000 mm height with RU-SH, special screwdriver, length 3500 mm, width 1400 mm, work platform inclination manually approx. 3000 mm wide Additional cost RU-BM 3500 versus RU-BM 3000: €2,811.00 Fitting storage for RU-BM-3500 (only available free-standing): Price EUR ...

Stanje: novo, Assembly line consisting of: Pos. 1.0 / RU-CBM 4000 Work Table with a 500mm extended guide rail for the additional installation of an aluminum bracket screwdriving machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table. Length 4000 mm, width 1400 mm, tilt angle of the working platform manually adjustable. Mounting bracket for fitting shears or fitting punch. 16 pivoting counter-holders for suspending sashes, fully pneumatically foldable for unrestricted movement of the sashes on the table surface. Device for detecting sash hardware length for constant and variable/central gear placement for already drilled sashes, visual size recognition of the fittings. RU-SH, special screwdriver with pneumatic depth stop mounted on carriage, safety control system, pneumatic height adjustment, screw feeder device with automatic container shut-off (manual feed for a second screw length at the special screwdriver upon request). RA-8, turret stop for 8 screwing levels mounted on the carriage. RA-4, turret stop for 4 different sash widths mounted on the pivoting table. Sash measurement detection pneumatically operated, detection range up to 2500mm with Lrodpfx Aod Ih Hujhusn simultaneous clamping of the measuring system. PSF – Pneumatic clamping device for sashes. Working height adjustable from 900 – 1000 mm. Support table covered with felt. Guide rail extended to the left by 800 mm. Pos. 1.1 / 5035-1 Pneumatic swing mechanism for the work surface with foot valve Pos. 1.2 / 0500000 Bracket adapted for customer-provided punch/shears. For mounting a customer-supplied fitting punch or fitting shears (third-party make) on the sash assembly table. Please specify manufacturer when ordering!!! Pos. 1.3 / 5597-7 Travel device for RU-CBM on semi-circular guide rails. The running rollers are mounted left and right on the base frame of the table. Pos. 1.4 / 6354-6 3 double-meter semi-circular guide rails, 30 x 10 mm. Pos. 1.5 / 0730000 RU-SBL3000/40 hardware storage, free-standing, Length 3100 mm, depth 1250 mm, height 2200 mm, Support frame without front supports, 40 compartments, separated by dividing walls into 10 pieces per row, and one continuous shelf above, Compartment size: width 280 mm, height 150 mm. Pos. 2 RU-CSA-SMB aluminum bracket screwdriving machine with automatic screw feeding and manual feeding of the aluminum brackets from a mobile box with pneumatic positioning system, Screwdriver with depth stop with 4-position turret stop. Pneumatic adjustment in the y-direction against two 6-position turret stops. Feeder box for manual feeding of rotational or clip brackets in square form 18.5 x 18.5 mm. The bracket is manually pushed into a channel in the box and positioned in front of the screwdriver tip by a pneumatically actuated slide. Profile depth max. 150 mm, screw spacing in y-direction max. 120 mm. Pos. 3 RU-S48-A6-350 column jib crane for chain hoist, with 6 m aluminum jib arm Version with base column, low-friction jib arm and manual push trolley for slewing and trolley travel by pulling and pushing on the load. Jib reach 6 m Structural height 4.461 m Lower edge of jib arm 3.722 m (upper edge of jib arm 3.9 m) Slewing range max. 270° Steelwork painted in RAL 7035 The base plate is mounted to the hall floor supplied by the customer with ...