Orodje Za Krivljenje nakup rabljenega (84.626)

Stanje: dober (rabljeno), Orodje za upogibanje, matrica, spodnji nož, spodnje orodje, prizemsko orodje Folox S D U Aohccqrspd - Orodje: za upogibni stiskalnik, 7-delni komplet - Skupna dolžina: 1053 mm / posamezno 1x 238/58/390/100/270 mm / 2x 75 mm - Širina/Višina: 97 mm - Teža: 75 kg

Stanje: dober (rabljeno), Bending tool, die, upper blade, upper tool, straight tool - Tool for: press brake - V-grooves: 90° x 75 mm - Dimensions: see drawing in photos - Size: 2500/270/H175 mm Folhccqefiqq Usrjpd - Weight: 188 kg

Stanje: dober (rabljeno), Bending tool, die, upper blade, upper tool, straight tool Fpolhccec Spnmoqrod - Tool for: press brake - Angle: 60° - Thickness: 25 mm - Total length: 630 mm - Total height: 192 mm - Weight: 16 kg

Stanje: dober (rabljeno), Orodje za stiskanje, oblikovalec pločevine, oblikovalno orodje, orodje za preoblikovanje, orodje za upogibanje, matrica, stiskalno orodje -Orodje za upogibanje: stiskalno orodje za upogibno stiskalnico/abkant presso, 5 kosov -Dolžina: 2x 300 mm / po 1x 275/200/175 mm -Širina utora: 58/52 mm -Kot: 90° -Mere: glej fotografije / tehnična risba -Cena/izvedba: komplet -Transportne mere: 450/300/H115 mm -Teža: 48,3 kg Fpolhov Szbhoccqrjd

Stanje: dober (rabljeno), Bending tool, die, upper blade, upper tool, gooseneck tool for press brake (gooseneck and variant spelling) Fpslhcjfiqrnjcqrod - Tool for: press brake - Dimensions: 3000/30/H116 mm - Weight: 48 kg

Stanje: dober (rabljeno), Bending tool, die, lower knife, lower tool, prism tool - Tool: for press brake - Prism: 30° 12 mm - Square: 80 x 80 mm - Length: 2500 mm Fjlhjb A Nlfjccqrjpd - Weight: 120 kg

Stanje: dober (rabljeno), Bending tool, die, lower blade, lower tool, prism tool Fpslhceb A Nlmscqrsd - Tool: for press brake - Prisms: 90° 5/8/9/12 mm - Square: 54 x 45 mm - Length: 2550 mm - Weight: 70 kg

Stanje: dober (rabljeno), Bending tool, die, upper blade, upper tool, goose neck tool for press brake - Tool: for press brake - Tool radius: 5 mm - Dimensions: 45 x 220 mm - Length: 2400 mm Fjljb A Nlrehccqrepd - Weight: 120 kg

Stanje: dober (rabljeno), Bending tool, die, upper blade, upper tool, Rehfuss tool, Rehfuß tool for press brake Fpolhccqob A Nlqored - Tool: for press brake - Tool radius: 8.5 mm - Dimensions: 50 x 180 mm - Shank: 15 x 17 mm - Length: 3250 mm - Weight: 140 kg

Stanje: dober (rabljeno), Bending tool, die, upper blade, upper tool, gooseneck tool, gooseneck punch for press brake - Tool: for press brake - Tool radius: 13.5 mm - Dimensions: 50 x 180 mm - Shank: 15 x 17 mm - Length: 3250 mm Fsleb A Nlpohccqrspd - Weight: 140 kg

Stanje: dober (rabljeno), Bending tool, die, upper blade, upper tool, gooseneck tool for press brake - Tool: for press brake Fpolhcceb A Nlueqred - Dimensions: 20 x 160 mm - Shank/holder size: 35 x 31 mm - Length: 2680 mm - Weight: 110 kg

Stanje: dober (rabljeno), Bending tool, die, lower blade, lower tool, prism tool - Tool: for press brake - Prisms: 90°, 10 mm - Prisms: 90°, 10 mm - Tool: segmented - Tool dimensions: 32 x 90 mm - Total tool length: 2430 mm - Transport dimensions: 820/90/H96 mm - Weight: 80 kg Fslhccqob A Rxqorepd

Stanje: dober (rabljeno), Bending tool, die, upper blade, upper tool, straight tool - Tool: for press brake - Tool angle: 88° - Bending length: 100 mm - Overall height: 149 mm - Weight: 3 kg Fslhoc Iby Ijccqropd

Stanje: dober (rabljeno), Bending tool, die, lower blade, lower tool, prism tool Fpjlhccqjb A Rulorjd - Tool: for press brake - Groove: 32 mm wide - Square: 95 x 35 mm - Length: 3500 mm - Weight: 70 kg

Stanje: dober (rabljeno), Bending tool, die, upper blade, upper tool, straight tool Folhccqeb A Rqgsrepd - Tool: for press brake - Tool radius: 10 mm - Dimensions: 45 x 190 mm - Length: 3000 mm - Weight: 240 kg

Stanje: dober (rabljeno), Bending tool, die, lower blade, lower tool, prism tool - Tool: for press brake - Prisms: 90° 12 mm - Prisms: 90° 10 mm - Tool: segmented Folhccob A Rumoqrepd - Tool dimensions: 30 x 90 mm - Total tool length: 2500 mm - Rail length: 2500 mm - Weight: 95 kg

Stanje: dober (rabljeno), Bending tool, die, lower blade, bottom tool, prism tool - Tool: for press brake - Prisms: 90° 12 mm Fpjlhccqeb A Runered - Prisms: 90° 10 mm - Tool: not segmented - Tool dimensions: 30 x 90 mm - Total tool length: 2000 mm - Rail length: 2500 mm - Weight: 83 kg

Stanje: dober (rabljeno), Bending tool, die, upper blade, upper tool, straight tool - Tool: for press brake Folhccob A Ihuoqrepd - Tool radius: 7.5 mm - Dimensions: 45 x 190 mm - Length: 2800 mm - Weight: 240 kg

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1968, Funkcionalnost: nepreverjeno, številka stroja/vozila: 70013, potovalna razdalja osi X: 400 mm, pomik osi Y: 300 mm, pomik po osi Z: 300 mm, največja hitrost vretena: 1.600 obr/min, hitrost vretena (min.): 32 obr/min, proizvajalec krmilnikov: HEIDENHAIN, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Folhcsyk Ufnocqrspd Oddaja ponudbe pomeni obveznost pravočasnega prevzema med 08.04.26 in 16.04.26! TEHNIČNI PODATKI Pomik osi X: 400 mm Pomik osi Y: 300 mm Pomik osi Z: 300 mm Območje vrtljajev vretena: 32 do 1600 min⁻¹ Dimenzije mize: 590 x 430 mm Širina čeljusti: 160 mm PODROBNOSTI O STROJU Proizvajalec krmiljenja: HEIDENHAIN Dimenzije in teža Dimenzije (D x Š x V): 2500 x 2000 x 1800 mm Teža stroja: 1500 kg OPREMA Trioosni digitalni prikazovalnik Delavniška omara s pripadajočo opremo

Leto izdelave: 2004, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Stroj za razrez in 2D krivljenje aluminijastih cevi debeline 7 in 8 mm. Fpeljyt Sp Nohccqrjd

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Fslhcsypbquocqrjpd Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Fpslhoypbqneccqrsd Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity Fpeloypbqhehccqred The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Fpslhcjypbqbecqred Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes) Folhceypbp Rscqrepd