Fp1 nakup rabljenega (153)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Interna št. artikla: 26065 Kedjzfh Idspfx Abxolu Univerzalni rezkalni stroj Deckel FP1 Št. stroja: 2101-0315 + 2-osni digitalni prikazovalnik + Brezstopenjski pomik Stroj prihaja iz izobraževalne ustanove in je v dobro vzdrževanem stanju. Stroj si lahko ogledate pod napetostjo v naši ogrevani skladiščni hali s površino nad 500 m².

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Interna št. artikla: 26007 Univerzalni rezkalni stroj Deckel FP1 Pomiki: X300 / Y160 / Z340 mm Pomik pinole: 60 mm Priključna moč: 1,9 kW Število hitrosti vretena: 16 Območje vrtljajev: 40–2000 vrt/min Vpenjanje orodja: SK40 Pomik: brezstopenjsko 5–500 mm/min Kljdpfx Aezb Ni Ajbxeu Hitri pomik ne deluje! Stroj je izobraževalnega izvora in je lepo ohranjen. Z veseljem vam stroj pod napetostjo pokažemo v naši ogrevani skladiščni hali na več kot 500 m².

Stanje: dober (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 4038, potovalna razdalja osi X: 290 mm, pomik osi Y: 150 mm, pomik po osi Z: 330 mm, montažni premer: 40 mm, dolžina mize: 600 mm, širina mize: 210 mm, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, skupna masa: 700 kg, CONDITION & NOTES: Kjdjwxpxmjpfx Abxolu - This is an active path-controlled tool milling machine

Stanje: dober (rabljeno), Interna št. artikla: 26031 Univerzalni rezkalni stroj Deckel FP1 Brezstopenjski pomik + Razni nosilci orodij SK40 + Set vpenjalnih tulec (S20x2) + Hidravlična strojna primež Röhm 110 Kedpfjyqx S Eex Abxslu Servomotor je bil obnovljen! Pomiki: X300 / Y160 / Z340 mm Hod pinole: 60 mm Priključna moč: 1,9 kW Število hitrosti vretena: 16 Območje obratov: 40-2000 obr/min Držalo orodja: SK40 Pomik: brezstopenjski 5-500 mm/min Stroj je popolnoma delujoč in ga je mogoče po dogovoru pod napetostjo ogledati na več kot 500 m² ogrevani skladiščni površini.

Stanje: dober (rabljeno), Leto izdelave: 1985, Obdavčeno po principu razlike v ceni skladno s §25a Zakona o DDV. Prejeli boste ustrezen račun. Interna številka artikla: 26006 Stroj si lahko ogledate pod napetostjo na več kot 500 m² ogrevane skladiščne površine. Univerzalni rezkalni stroj Deckel FP1 (3-osna aktivna digitalna izvedba) Leto izdelave: 1985 Hodi: X300 / Y160 / Z340 mm Premik pinole: 60 mm Priključna moč: 1,9 kW Št. hitrosti vretena: 16 Območje vrtljajev: 40-2000 obr/min Ksdpfxeygv Ups Abxolu Vpenjanje orodja: SK40 Pomik: brezstopenjsko 5-500 mm/min Krmiljenje deluje brezhibno, vendar so LED diode okvarjene! + Hidravlični strojski primež Röhm BB110 Stroj izhaja iz izobraževalne ustanove in je v dobro ohranjenem stanju.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed – Excellent Condition, CE Compliant Technical Data: - Year of manufacture: 1990 Machine no.: 2102-5046 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed in 3 axes - Rapid traverse in 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300/160/340 mm - Vertical milling head adjustable on spindle carrier by 100mm - Vertical quill and horizontal quill – SK40 - Drawbar system S20x2 - Weight: approx. 800 kg Accessories and Equipment: - 3-Axis Heidenhain TNC 113 Digital Readout - Coolant system - Machine lamp - Operating manual & spare parts list Kodpfozbb E Aox Abxjlu About the machine: Offered here is a universal milling machine Deckel FP1, CE compliant and in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available on them. A major advantage is the active 3-axis digital readout. With the Heidenhain TNC 113 control, you can input dimensions and let the machine automatically travel to those positions. This FP1 was used in a training workshop and was only operated occasionally. Oil has been changed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes working easier and more precise. Take the opportunity to inspect and test the machine on site under power.

Stanje: rabljeno, številka stroja/vozila: 28670, x-travel: approx. 400 mm y-travel: 150 mm z-travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 4 T-slot width: 12 mm Spindle speeds: 20 - 2000 rpm Speed range - vertical: 60 - 1200 rpm Speed range - horizontal: 95 - 1900 rpm Klsdpfx Abocxxlioxou Spindle speed steps: 12 Feed range: 10 - 500 mm/min Feed steps: 10 Spindle taper: MK 4 Quill stroke vertical: 60 mm Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Required space approx.: 0.9 x 1.05 x 1.55 m

Stanje: rabljeno, številka stroja/vozila: 52326/08, x-travel: 250 mm y-travel: 150 mm z-travel: 305 mm Table clamping area: 600 x 210 mm Spindle speed range: 40 - 2000 rpm Number of spindle speeds: 16 Spindle taper: SK 40 Kodpscxxrvofx Abxjlu Feed rate: 10 - 500 mm/min Number of feed rates: 16 Vertical head swivels: +/- 90 degrees Total power requirement: 1.0 / 1.4 kW Machine weight approx.: 0.8 t Space requirement approx.: 1.0 x 1.25 x 0.85 m Universal Tool Milling Machine Type Deckel FP1 featuring: - Swiveling vertical spindle - Vertical head swiveling +/- 90° - Spindle taper SK40 - Automatic feeds - Pole-changing motor - Separate electrical cabinet with main switch.

Stanje: novo, Višina konic // mm Kedpfx Abszcgfqoxolu Skupna potrebna moč / kW Teža stroja pribl. / t Potrebni prostor pribl. / m Delilna glava za Deckel FP1 / FP2 Stanje: NOVO

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, DECKEL FP1 Aktiv Milling Machine Manufacturer: Deckel Model: FP1 Aktiv Condition: Very good Control type: Conventional Control: Aktiv HEIDENHAIN TNC X travel: 300 mm Y travel: 160 mm Z travel: 340 mm Tool holder: SK40 Spindle speed: 40–2000 rpm Control: Aktiv HEIDENHAIN TNC Total power requirement: 2 kW Kledpfxey Tlwue Abxeu Machine weight approx. 0.73 t Space requirements approx. LxWxH 1200x1100x1600 mm

Stanje: dober (rabljeno), Številka zaloge: 3118 Kjdezar H Iepfx Abxjlu Proizvajalec: Deckel Serijska številka: R 35817 Tip / Model: FP 1 Pomiki x-y-z: 300 - 150 - 340 mm Miza: 600 x 200 mm Območje vrtljajev: 40 do 2.000 o/min Vpenjanje vretena: Pomiki: 16 do 500 mm/min Priključek: 1 / 1,5 kW Dodatki/Oprema: Digitalni prikazovalnik Heidenhain Stanje: dobro Teža: 0,8 t Mere: 800 x 1.000 x 1.800 mm

Stanje: dober (rabljeno), Skladiščna številka: 3010 Proizvajalec: Deckel Številka stroja: 31488 Tip / Model: FP 1 Klodpfew D N Thex Abxsu Pomiki x-y-z: 300 - 150 - 340 mm Miza: 600 x 200 mm Območje vrtljajev: 40 do 2.000 obr/min Vreteno: MK 40 Pomiki: 16 do 500 mm/min Priključna moč: 1 / 1,5 kW Dodatki/Oprema: digitalni prikaz Elesta Stanje: dobro Teža: 0,8 t Dimenzije: 800 x 1.000 x 1.800 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Universal milling machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1984 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2101-1067 Milling head type: 2171 Milling head no.: 1086 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X and Z axes - Fixed table 600 x 200 mm (T-slot: 12 mm) Kjdpfx Abjchfyfoxelu - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant device - Operating manual - used, as seen -

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP1 Aktiv milling machine with 3-axis Heidenhain digital readout, tilting table. SK 40 spindle taper. Good operational condition, can be demonstrated under power by prior arrangement. Klsdpfx Abswg S I Tsxju

Leto izdelave: 1990, stanje: dober (rabljeno), Various collets and holders, approx. 300 pieces. Ksdpehvz Iisfx Abxslu For DECKEL milling machines FP1, FP2, FP3, FP4. Individual sale upon request.

Stanje: pripravljen za uporabo (rabljen), Univerzalni / orodjarski rezkalni stroj DECKEL FP 1 & 3-osni Heidenhain digitalni prikazovalnik - Zelo dobro ohranjen originalno stanje - Pomiki X/Y/Z 300x150x340 mm - Območje vrtljajev 40-2000 min⁻¹ - Samodejni pomiki v dveh oseh - Vertikalni / horizontalni rezkalni nastavek - Orodni nosilec ISO 40 - Fiksna kotna miza - Heidenhain 3-osni digitalni prikazovalnik - Hladilna naprava - Posoda za ostružke - Dokumentacija Mere: DxŠxV 1,1x0,8x1,7 metra / Teža 700 kg Pridržujemo si pravico do napak in tipkarskih napak Kljdpsy Ummmjfx Abxeu

Stanje: pripravljen za uporabo (rabljen), Travel distances: 300 x 150 x 340 mm Universal table: 600 x 260 mm Spindle mount: ISO 40 Kljdpfx Abedr E Apsxeu Spindle speeds: 40–2000 rpm Digital readout Various accessories MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 160 mm, dolžina podajanja os Z: 320 mm, skupna masa: 860 kg, Universal tool milling machine Ruhla Type 58 Thiel Duplex 58 similar to Deckel FP1 Compact machine with quill spindle and automatic feed on all 3 axes including vise New digital readout with 1 measuring scale included Kledpfx Abewf Agdoxeu Swiveling table +/- 0-30° Table size 715 x 260mm X 300mm Y 160mm Z 320mm Dimensions (LxWxH) approx. 110 x 110 x 170cm Inspection and test run welcome

Stanje: zelo dobro (rabljeno), Leto izdelave: 1976, Funkcionalnost: popolnoma funkcionalen, Deckel FP1 FPS obnovljeni orodjarni rezkalni stroj s Heidenhain 3-osnim digitalnim prikazovalnikom. Stroj je v zelo dobrem stanju, prihaja iz izobraževalnega oddelka. Nastavljiva kotna miza, vreteno SK 40, dodatki: različne vpenjalne puše in nosilci rezkalnikov. Dobro delujoče stanje, možen priklop in preizkus po dogovoru. Kledpfxsy Dz T Te Abxou

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 160 mm, dolžina podajanja os Z: 340 mm, For sale: Conventional milling machine from Deckel, model FP1 Due to the compact size of the machine, it is ideal for quick jobs in areas with limited space. The machine is fully functional. Technical data: Ksdpeugv Hvjfx Abxelu Travel (X-axis): 300 mm Travel (Y-axis): 160 mm Travel (Z-axis): 340 mm Tool holder: SK40 Spindle speed: 40–2000 rpm Control: Conventional Table size: 600 x 210 mm Total power requirement: 2 kW Machine weight: approx. 0.73 t Required space (LxWxH): approx. 1200 x 1100 x 1600 mm Loading and shipping can be organized Europe-wide upon request. Prices are quoted excluding VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE Do you require a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own machine? For further information or contact options, please visit our website.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 150 mm, pomik po osi Z: 340 mm, poteza s peresom: 80 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, dolžina mize: 210 mm, širina mize: 600 mm, skupna višina: 1.750 mm, skupna dolžina: 1.400 mm, skupna širina: 1.600 mm, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, skupna masa: 850 kg, obremenitev mize: 200 kg, trajanje garancije: 3 meseci, Stroj bol v roku 2026 nami dielňou kompletne/čiastočne repasovaný a je vo výbornom stave. Počas čiastočnej repasácie bol nainštalovaný nový brzdový motor. Ovládanie 3-osové aktívne digitálne odčítavanie HEIDENHAIN TNC 113 Otáčky 40–2000 ot./min, geometricky stupňovaná priama prevodovka s 18 rýchlostnými stupňami pre maximálny krútiaci moment/frézovací výkon Posuv 5 až 500 mm/min, plynulo nastaviteľný Rýchloposuv 1,2 m/min Kledpfx Asyi Amwebxeu Pinola Výsuvná pinola, vertikálne 80 mm, SK40 s upínacím závitom M16, voliteľne: so závitom na pílu DECKEL S20 x 2 Výsuvná pinola horizontálne cca 100 mm Osi X/Y/Z 300/150/340 mm Stôl Pevný uhlový stôl 600 x 210 mm Maximálne zaťaženie stola 200 kg Vybavenie • Vertikálne a horizontálne vreteno • Frézovacia hlava manuálne naklápateľná +/- 90° • Harmonikový kryt osi Z Voliteľné príslušenstvo • Vanička na triesky • Pracovné osvetlenie • Univerzálny stôl • Otočný stôl • Dlabací nadstavec • Deliaca hlava • Protiľahlý držiak • atď.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 2103 XXXXXX, The FPS 300M, successor to the DECKEL FP1. Based on our many years of service experience, we decided to develop and manufacture our own milling machines. The FPS 300M is a conventional milling machine, perfectly suited for both training and production. Control 3 axes – FPS Aktiv – digital display Spindle speed 40 – 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque and milling performance Feed 5 to 500 mm/min, continuously adjustable Rapid traverse 1.5 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Ksdpfx Abjh I Nqwsxolu Axes X/Y/Z 300/160/340 mm Table Rigid angle table 600 x 210 mm Equipment • Vertical and horizontal spindle • Milling head manually tiltable +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc. Further technical data can be found in the attached data sheet.

Leto izdelave: 1981, stanje: dober (rabljeno), Deckel FP1 2-axis universal milling machine with Heidenhain digital readout and tilting/swivel table. SK 40 spindle taper. Machine is in good, fully operational condition. Can be demonstrated under power by prior arrangement. Klsdpfx Aehg Embebxou

Leto izdelave: 1974, stanje: skoraj kot novo (rabljeno), As-new Deckel FP1 universal milling machine, overhauled by FPS, featuring 3-axis Heidenhain digital readout, adjustable swivel table, and SK 40 spindle taper. Equipped with spindle brake. Accessories include tailstock and various collets. The machine is in excellent, ready-to-operate condition and can be demonstrated under power by arrangement. Kjdpsq A Icqefx Abxelu

Leto izdelave: 1976, stanje: dober (rabljeno), Deckel FP1 tool milling machine, equipped with 3-axis Heidenhain digital readout. The machine was overhauled by FPS several years ago. Features a fixed table and SK 40 spindle taper, both vertical and horizontal. Accessories include various collets and arbor holders, steady rest, and more. The machine is in good, ready-to-use condition; however, the paintwork shows signs of wear. Can be demonstrated under power by prior arrangement. Kjdpfjrhzcujx Abxjlu