Deckel Maho Fp3 nakup rabljenega (321)

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 36109, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, hitro pomikanje X-os: 6.000 m/min, hitri pomik os Y: 6.000 m/min, hitri pomik na osi Z: 6.000 m/min, nazivna (navidezna) moč: 16 kVA, skupna višina: 2.000 mm, skupna dolžina: 3.000 mm, skupna širina: 2.800 mm, širina mize: 480 mm, dolžina mize: 800 mm, obremenitev mize: 530 kg, vrtljajska hitrost (min.): 31 obr/min, največja hitrost vrtenja: 5.000 obr/min, skupna masa: 2.800 kg, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, Lep stroj še vedno lepo teče in opravlja natančno delo. Stroj si je mogoče ogledati v delujočem stanju. Iiodpfxoxt Nlye Ah Ajk

Stanje: pripravljen za uporabo (rabljen), Two Deckel Maho milling machines are available. 1) Maho MH 800 E Travel (X/Y/Z): 800mm/450mm/500mm Spindle speed: 3,150 rpm Tool holder: SK40 Quill stroke: 80mm Table dimensions (X/Y): 900mm/600mm Max. table load: 450kg Feed rate (X/Y/Z): 150mm/min Rapid traverse (X/Y/Z): 4,500mm/2,500mm/4,500mm/min Machine dimensions (X/Y/Z): approx. 2,900mm/2,400mm/2,300mm Weight: approx. 4,400kg 2) Deckel Maho FP3NC Travel (X/Y/Z): 500mm/300mm/400mm Table dimensions (X/Y): 800mm/420mm Tool holder: SK40 Spindle speed: 2,000 rpm Feed rate: 50mm/min Rapid traverse: 1,500mm/min Weight: approx. 1,500kg Iijdpfjvb Ha Usx Ah Ask An on-site inspection is possible.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Glavni pogon Število osi: 5 Iiedpfx Ahex Hbmfo Ajk Mediji Transportni trak za ostružke: Da Premiki Pomik osi X: 780 mm Pomik osi Z: 630 mm Pomik osi Y: 560 mm Ta stroj DMG DECKEL MAHO DMC 60T je bil izdelan leta 2005. Univerzalni CNC obdelovalni center z robustno konstrukcijo in zanesljivim delovanjem za precizne obdelovalne naloge. Izkoristite priložnost za nakup univerzalnega CNC obdelovalnega centra DMG DECKEL MAHO DMC 60T. Kontaktirajte nas za več informacij. Vrste aplikacij Rezkanje

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 39.256 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 780 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, skupna višina: 2.800 mm, skupna dolžina: 7.000 mm, skupna širina: 7.000 mm, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 12.000 kg, For sale: Deckel Maho DMC 60 T machining centre The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis swivel range: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table rotation speed: max. 30 rpm Number of tool pockets: 120 positions Max. tool diameter: 80 mm Max. tool diameter with an empty adjacent pocket: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse (X / Y / Z): 50 m/min Feed speed: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Iiedpfx Ahowtft Nj Aek Machine weight: approx. 12.0 t Space requirements: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, cooling system, high-pressure coolant 40 bar IKZ, paper band filter, 2-position pallet changer, tool breakage control Accessories such as clamping devices or tool holders are not included in the offer. On request, transport and loading can be organised throughout Europe at an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery trading (purchase/sale) BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 43.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 635 mm, pomik osi Y: 510 mm, pomik po osi Z: 460 mm, največja hitrost vrtenja: 14.000 obr/min, število mest v zalogovniku orodij: 60, Oprema: transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Machine has 2 pallets. Controller is SIEMENS Iedpfxev Acpbs Ah Ajik

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 2881-0469, Stroj deluje. Osi se premikajo. Vreteno se vrti. Iiodpsx Azqmefx Ah Ask

Leto izdelave: 2005, Stanje: zelo dobro (rabljeno),

Stanje: rabljeno, Leto izdelave: 2001, Deckel Maho DMC 60U Hi-dyn Bearbeitungszentrum Condition: Used Iiodpfeu Rnluox Ah Ajk Year of manufacture: 2001 Power-on hours: 56,376 Spindle hours: 26,451 Technical data: Travel X/Y/Z: 600 / 600 / 700 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Speed: 18,000 rpm Tool holder: SK 40 Magazine places SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal tool changer with double gripper - Automatic swivel milling head - Rotating viewing window - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B axis SK 40 (only in combination with SK 40 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4, Extended manual intervention - Rinsing gun with pump - Tool breakage control SK 40 mechanical version, range: 63...310 mm / +/- 3 mm - Interval control chip conveyor - Internal coolant supply switchable from 40 bar to 80 bar

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Krmilna enota Znamka: HEIDENHAIN Iisdpfsx D R Tgjx Ah Aok Pomiki Pomik X-osi: 640 mm Pomik Y-osi: 600 mm Pomik Z-osi: 500 mm Mediji Transportni trak za odrezke: Da Stroj DECKEL MAHO DMC 64 V Linear s tremi osmi je bil izdelan leta 2004. Gre za vertikalni obdelovalni center, opremljen z otipnim tipalom Heidenhain, krmilno enoto iTNC 530 ter transportnim trakom za odrezke. Omogoča hitre pomike do 100 m/min in hode X, Y, Z 640 x 600 x 500 mm. Če iščete stroj za kakovostno rezkanje, priporočamo DECKEL MAHO DMC 64 V Linear iz naše ponudbe. Za več informacij nas kontaktirajte. Vrsta uporabe Rezkanje

Stanje: dober (rabljeno), Leto izdelave: 1996, obratovalne ure: 35.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 380 mm, pomik po osi Z: 380 mm, največja hitrost vrtenja: 18.000 obr/min, skupna masa: 4.000 kg, For sale is a 5-axis machining center from DMU, model 50 5. The machine comes from a vocational school and is in good, well-maintained condition. Iiedpfx Ahory Tn Eo Aek Of particular note is that the spindle has only 2,000 hours, reaches up to 18,000 rpm and features an internal coolant supply (IKZ system). Technical specifications: Year of manufacture: 1996 Operating hours: 35,000 h Spindle replacement at: 33,000 h Spindle hours: 2,000 h Spindle taper: SK 40 Control: Heidenhain Mill Plus Max. speed: 18,000 rpm Travel (X/Y/Z): 500/380/380 mm Rotary table: 500 x 380 mm Dimensions (L/W/H): approx. 4,000/5,200/2,400 mm Weight: approx. 4,000 kg Delivery throughout Europe is possible upon request and for an additional charge. Prices are subject to VAT. Inspection by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your shop? Or are you looking to sell yours? For further information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 71401453, potovalna razdalja osi X: 600 mm, pomik osi Y: 700 mm, pomik po osi Z: 600 mm, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 40 m/min, hitri pomik na osi Z: 40 m/min, dolžina podajanja os X: 15.000 mm, dolžina pomika po osi Y: 15.000 mm, dolžina podajanja os Z: 15.000 mm, model krmilnika: MILLPLUS, skupna višina: 2.500 mm, skupna dolžina: 5.500 mm, skupna širina: 4.500 mm, premer vrtljive mize: 630 mm, skupna masa: 10.000 kg, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 26.350 h, število mest v zalogovniku orodij: 60, montažni premer: 40 mm, premer orodja: 100 mm, DECKEL MAHO DMU 60 P Hi-dyn CNC Univerzalni obdelovalni center - Obratovalna napetost: 400 V - Frekvenca: 50 Hz - Nazivni tok: 80 A - Priključek: 44 kVA - Ločljivost merilnega sistema X/Y/Z-os: 0,001 mm - Vhodna enota X/Y/Z-os: 0,001 mm - Pozicijska toleranca v osi X/Y/Z: 0,010 mm - Največja dolžina orodja od vretena brez nadzora zloma orodja: 350 mm Iijdpfx Ahsx E T R Tj Aok - NC okrogla mizna vpenjalna površina: 630 mm premer - Razdalja med T-utorji: 63 mm - Število utorov: 9 - Centrirna vrtina: 50 mm premer - Največje število obratov mize: 10,7 obr/min - Pomik: 3600°/min - Ločljivost merilnega sistema: 0,001° - Vključno s transporterjem odrezkov in hladilno napravo - Pozor: stroj je mogoče prevažati s tovornjakom s širino 3000 mm. Pozor: artikel mora biti obvezno prevzet v obdobju med 04. in 12.03.2026 na še dogovorjen termin. FCA D-75181 Pforzheim – natovorjeno na tovornjak.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 76.968 h, Krmilna enota Znamka: HEIDENHAIN Model: TNC 530 Glavni pogon Iisdpfjx D Nhisx Ah Aek Območje hitrosti vretena: 28.000 vrt/min Število osi: 3 Pomik Pomik X-osi: 1.050 mm Pomik Y-osi: 800 mm Pomik Z-osi: 560 mm Ta 3-osni vertikalni obdelovalni center DECKEL MAHO DMC 105 V linear je bil izdelan leta 2006. Namenjen je za natančne in učinkovite kompleksne rezkalne operacije. Če iščete stroj za visokokakovostno rezkanje, razmislite o nakupu stroja DECKEL MAHO DMC 105 V linear iz naše ponudbe. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 240 mm, pomik po osi Z: 340 mm, For sale is a 5-axis machining center from Deckel Maho, model DMU 35 M, equipped with 2 manual rotary axes. Ijdswal Aqepfx Ah Aoik The machine is in excellent, fully operational condition and is especially space-saving due to its compact size. Technical data: Year of manufacture: 1999 Control: Siemens 840D ShopMill X-axis: 350 mm Y-axis: 240 mm Z-axis: 340 mm Feed rate: infinitely variable up to 5,000 mm/min Rapid traverse: 5 m/min Servo motors for X, Y & Z axes Clamping surface: Ø 400 x 280 mm Swivel range: 360° (mechanical) Table clamping: +105/-150 (mechanical) Max. table load: 100 kg Tool changer: manual change Tool holder: SK 40 Tool clamping: pneumatic/mechanical Space requirement: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Includes electronic handwheel, chip tray. Tool holders and vices are not included in the offer, but can be supplied separately upon request. Transport and loading can be organized anywhere in Europe for an additional charge. Prices are subject to VAT. Inspection by appointment is possible. Please contact us — our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Premiki Premik po osi X: 700 mm Premik po osi Y: 550 mm Premik po osi Z: 500 mm Ta 3-osni DECKEL MAHO DMC 70 V je bil izdelan leta 2002. Opremljen je z izmenjevalcem orodij s 30 mesti, hitrostjo vretena 18.000 min⁻¹ in transporterjem za odrezke. Krmilni sistem je TNC 430. Opomba: orodne peresa v smeri Z so okvarjena. Če iščete visoko kakovostne možnosti rezkanja, razmislite o stroju DECKEL MAHO DMC 70 V, ki je pri nas naprodaj. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Rezkanje Iijdpfx Aox D H Igeh Aek

Stanje: rabljeno, Leto izdelave: 1997, obratovalne ure: 10.227 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 525 mm, pomik po osi Z: 500 mm, širina mize: 540 mm, dolžina mize: 1.000 mm, skupna masa: 4.500 kg, največja hitrost vretena: 12.000 obr/min, For sale is a machining center by Deckel Maho, model DMU 60 E. The machine is fully functional and ready for immediate use. Of particular note are the low program run hours. Iiodew I R I Hepfx Ah Ajk Technical data: Year of manufacture (estimated): 1997 Control: HEIDENHAIN TNC 426PB Control on-time: 8,283 h Machine on-time: 31,148 h Program run time: 10,227 h Total power requirement: approx. 26 kVA Travel X-axis: 600 mm Travel Y-axis: 525 mm Travel Z-axis: 500 mm Clamping surface: 1,000 x 540 mm Max. table load: 350 kg Spindle speed range: 20 - 12,000 rpm Tool holder: SK 40 Feed speed: 20 - 10,000 mm/min Rapid traverse X/Y axis: 18 m/min Rapid traverse Z axis: 15 m/min Tool changer: 25 Dimensions (L x W x H): approx. 2.95 x 2.1 x 2.26 m Weight: approx. 4,500 kg Transportation and loading can be arranged Europe-wide upon request, at an additional charge. All prices are subject to VAT. An inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machine purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Splošni podatki Teža stroja: 6800 kg Krmilna enota Znamka: SIEMENS Glavni pogon Ijdpex H Uziefx Ah Aoik Število osi: 3 Pomik Pomik osi X: 640 mm Pomik osi Z: 500 mm Pomik osi Y: 600 mm Ta 3-osni DMG DECKEL MAHO DMC 64 V linear je bil izdelan leta 2002. Ima 640 mm X-os, 600 mm Y-os in 500 mm Z-os. Velikost mize je 850 x 600 mm, opremljen z magazinom za 30 orodij in konusom SK40. Upravljan je s krmilnim sistemom Siemens in tehta 6800 kg. Če iščete visokokakovostne rezkalne zmogljivosti, razmislite o stroju DMG DECKEL MAHO DMC 64 V linear, ki ga imamo na zalogi. Za več informacij nas kontaktirajte. Uporaba Rezkanje

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 39.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 420 mm, pomik po osi Z: 380 mm, model krmilnika: Heidenhain Mill Plus IT, skupna višina: 5.600 mm, skupna dolžina: 9.000 mm, skupna masa: 6.000 kg, For sale is a 5-axis machining center by DMU, model 50 eVolution. Special features include the GMN high-frequency spindle HCS 30,000/15 and the 92-position tool changer. The machine is in good condition and fully operational. Technical Data: Year of manufacture: 2004 Operating hours: approx. 39,000 h Control: Heidenhain MillPlus IT Table size: approx. 500 mm ⌀ Travel: X-axis: 500 mm Iiedpfx Ahstyit Ej Ajk Y-axis: 420 mm Z-axis: 380 mm A-axis: 0–180° C-axis: 360° Tool holder: HSK 50 Spindle speed: max. 30,000 rpm Frequency: 500 Hz Power: 15 kW Tool positions: 92 NO chip conveyor Space requirements according to drawing: 9,000 × 5,600 mm Transport dimensions: 2,800 × 3,700 × 2,800 mm Weight: 6,000 kg Transport and loading can be organized across Europe for an additional fee upon request. Prices are subject to VAT. Inspection possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Machine Purchasing & Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Fzho0bc Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or to get in touch, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 69.995 h, Krmilna enota Znamka: HEIDENHAIN TNC 530 Glavni pogon Število osi: 3 Pomik Pomik po X-osi: 885 mm Pomik po Y-osi: 600 mm Iiodpfx Ahjx D Iuue Aok Pomik po Z-osi: 600 mm Miza Nosilnost mize: 600 kg Ta 3-osni obdelovalni center DECKEL MAHO DMC 75 V Linear je bil izdelan leta 2005. Odlikuje ga hodenje 885 x 600 x 600 mm in največja podajalna hitrost 90 m/min. Stroj je opremljen z visokozmogljivim hladilnim sistemom in učinkovitim strgalnim tračnim transporterjem za odstranjevanje odrezkov. Če iščete kakovostno rezkalno rešitev, razmislite o nakupu DECKEL MAHO DMC 75 V stroja iz naše ponudbe. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 53.776 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 380 mm, premer vrtljive mize: 500 mm, največja hitrost vrtenja: 18.000 obr/min, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 2000 Control: MillPlus Operating hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping table diameter: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 positions Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Iijdpfjwxd Agox Ah Ask Transport and loading can be organized throughout Europe at an additional cost, if required. Prices are plus VAT. Viewing by appointment possible. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or would you like to sell your machine? For further information or contact options, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 42.368 h, Splošni podatki Teža stroja: 6800 kg Krmilna enota Znamka: HEIDENHAIN Model: iTNC 530 Glavni pogon Območje vrtljajev vretena: 12000 Iisdox D Ntfjpfx Ah Aok Vpenjalni stožec: SK40 Število osi: 3 Pomiki Pomik po osi X: 640 mm Pomik po osi Y: 600 mm Pomik po osi Z: 500 mm Ta triosni vertikalni obdelovalni center DMG DECKEL MAHO DMC 64 V linear je bil proizveden leta 2003. Ima pomik v osi X 640 mm, v osi Y 600 mm, v osi Z 500 mm ter dimenzije mize 850 x 600 mm. Opremljen je s krmilno enoto Heidenhain iTNC 530, stožcem SK40 in orodnim magazinom s kapaciteto za 30 orodij. Izkoristite priložnost za nakup vertikalnega obdelovalnega centra DMG DECKEL MAHO DMC 64 V linear. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 4.500 obr/min, For sale is a machining center from Deckel Maho, model DMU 50 M, with path control and manual rotary axes. The machine is in very good condition, fully functional, and ready for immediate use. A special feature is the ability to operate in an open enclosure. Technical specifications: Year of manufacture: 2002 Control: Heidenhain TNC 124 X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Feed rate: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotation range: 360° (mechanical) Swivel range: +90/ -15° (mechanical) Max. load: 200 kg Required space: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1,520 x 2,200 mm Weight: 2,600 kg Additional tool holders available upon request. Transport and loading can be organized across Europe for an additional charge upon request. Prices plus VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? Iiedeu Unh Iopfx Ah Aek For further information or contact options, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Krmilna enota Znamka: HEIDENHAIN Model: TNC 430 Iiodpsx D E Ilofx Ah Aek Glavni pogon Število osi: 3 Premiki Pomik X-osi: 900 mm Pomik Y-osi: 650 mm Pomik Z-osi: 600 mm To triosno vertikalno obdelovalno središče DECKEL MAHO DMU 80T je bilo izdelano leta 2002. Idealno za precizno strojno obdelavo, ponuja robustno konstrukcijo in zanesljivo delovanje. Razmislite o nakupu tega vertikalnega obdelovalnega centra DECKEL MAHO DMU 80T. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: dober (rabljeno), Leto izdelave: 1994, potovalna razdalja osi X: 700 mm, pomik osi Y: 550 mm, pomik po osi Z: 500 mm, For sale: Deckel Mori 70 V Gantry Machining Center The machining center is immediately ready for operation and fully functional. Technical data: Year of manufacture: 1994 Controller: Grundig Dialog 112 X-axis travel: 700 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Spindle taper: SK 40 Motor: brushless AC servo Drive type: stepless, 0-8,000 rpm Feed rate: stepless, 10,000 mm/min Iodpfxsv T U Uds Ah Aoik Table size: 900 x 550 mm Table load: 0.8 t Machine weight: approx. 7.2 t Equipment: - Knoll scraper conveyor - Internal cooling system Rapid traverse x/y: 30,000 mm/min Rapid traverse z: 20,000 mm/min Upon request, transport and loading can be organized Europe-wide at an additional cost. Prices are subject to VAT. Inspection possible by appointment. Contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell? For more information or for contact options, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Splošni podatki Teža stroja: 6500 kg Višina: 2500 mm Dimenzije Iedox E Ef Aopfx Ah Asik Dolžina stroja: 2800 mm Glavni pogon Število osi: 3 Hitrost vretena: 8000 vrt/min Moč motorja vretena: 7,5 kW Pomiki Pomik po X-osi: 1000 mm Pomik po Z-osi: 600 mm Pomik po Y-osi: 600 mm Ta 3-osni stroj DECKEL MAHO DMC 103 V je bil izdelan leta 2002. Opremljen je z največjo hitrostjo vretena 8000 vrt/min, 24-mestnim zalogovnikom orodij in robustno konstrukcijo s 6500 kg za stabilnost. Kompaktna zasnova omogoča učinkovito izrabo delavniškega prostora, visoka nosilnost 800 kg pa podpira različne aplikacije. Če iščete kakovostne rezkalne zmogljivosti, razmislite o stroju DECKEL MAHO DMC 103 V, ki je na voljo za prodajo. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 16.799 h, Krmilna enota Znamka: HEIDENHAIN Iodjx H U D Rspfx Ah Aoik Glavni pogon Število osi: 5 Hitrost vretena: 12000 vrt/min Stožčasta vpenjala: SK 40 Pomik Pomik X-osi: 800 mm Pomik Z-osi: 600 mm Pomik Y-osi: 700 mm Ta 5-osni DECKEL MAHO DMC 80 U hi-dyn je bil proizveden leta 2001. Ponaša se z rotacijsko hitrostjo do 12.000 vrt/min, samodejno nagibno rezkalno glavo na osi B in NC vrtljivo mizo na osi C dimenzij 900 x 630 mm. Stroj vključuje 60-mestni magazin orodij, krmilni sistem Heidenhain, dvopaletni menjalec in notranje hlajenje s tlakom 40 barov. Izkoristite priložnost za nakup tega univerzalnega obdelovalnega centra DECKEL MAHO DMC 80 U hi-dyn. Kontaktirajte nas za več informacij. Tipi uporabe Rezkanje