Deckel Fp1 nakup rabljenega (694)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rezkalni stroj Deckel FP1. Zelo dobro stanje. Popolnoma funkcionalen. Nedpexgdr Isfx Abbecl

Stanje: delavnici obnovljeno (rabljeno), dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 160 mm, dolžina podajanja os Z: 340 mm, Updated Machineseeker Description (with Axis Travel) Deckel FP1 Aktiv – 3 Axes – Partially Refurbished – Immediately Operational Offered is a Deckel FP1 Aktiv in technically inspected, partially refurbished condition. The machine has been professionally reconditioned and is in a dependable, ready-to-use state. Ideally suited for workshops, toolmaking, training environments, as well as prototype and small-batch production. This is not an unchecked used machine, but a technically overhauled toolroom milling machine with a clearly defined scope of delivery and reliable lead time. Technical Data and Features Ncodpex Tdy Iofx Abbjl Travel distances: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Infinitely variable feed on all 3 axes Coolant system Brake motor Rigid angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of Refurbishment Workshop-tested and partially refurbished Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all settings as required Replacement of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial refurbishment provides an optimal balance between operational safety, cost-efficiency, and availability. A full regrinding of the guideways was not carried out, as there was no technical necessity for it. Scope of Delivery Machine loaded free of charge Delivery time approx. 12 weeks

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 2-axis active digital display (Heidenhain) Spindle mounting: SK40 (S20x2) Travel distances: X 300 / Y 160 / Z 340 mm Ncjdpfsvnr Hyex Abbol Spindle speed: 40 - 2000 rpm (2 gearbox stages) Feed infinitely variable adjustable The machine is in well-maintained condition and can be inspected under power on site. Includes extensive accessories: - Machine vise - Operating manual / electrical circuit diagram / spare parts list - Collet set (S20x2) incl. SK40 collet chuck - Additional accessories available on request.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 3-axis active digital display (Heidenhain TNC113) Spindle taper: SK40 (S20x2) Nsdpfevnrz Rsx Abbecl Travel: X 300 / Y 160 / Z 340 mm Spindle speed: 40 - 2000 rpm (2-speed gearbox) Feed rate steplessly adjustable The machine is in well-maintained condition and can be inspected under power on site. Including extensive accessories: - Machine vice - Operating manual / electrical schematic / spare parts list - Collet chuck set (S20x2) including SK40 collet chuck adapter - Additional accessories available upon request.

Leto izdelave: 1974, Stanje: skoraj kot novo (rabljeno), As-new Deckel FP1 universal milling machine, overhauled by FPS, featuring 3-axis Heidenhain digital readout, adjustable swivel table, and SK 40 spindle taper. Equipped with spindle brake. Accessories include tailstock and various collets. The machine is in excellent, ready-to-operate condition and can be demonstrated under power by arrangement. Ncodpfoq A Icqox Abbol

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 160 mm, dolžina podajanja os Z: 340 mm, For sale: Conventional milling machine from Deckel, model FP1 Due to the compact size of the machine, it is ideal for quick jobs in areas with limited space. The machine is fully functional. Technical data: Travel (X-axis): 300 mm Travel (Y-axis): 160 mm Njdpfx Aougv Hvebbscl Travel (Z-axis): 340 mm Tool holder: SK40 Spindle speed: 40–2000 rpm Control: Conventional Table size: 600 x 210 mm Total power requirement: 2 kW Machine weight: approx. 0.73 t Required space (LxWxH): approx. 1200 x 1100 x 1600 mm Loading and shipping can be organized Europe-wide upon request. Prices are quoted excluding VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE Do you require a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own machine? For further information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 360 mm, For sale is a Deckel FP1 milling machine with 3-axis active control. The machine is fully operational and is inspected, cleaned, and stored in our incoming goods area. Technical data: • Digital display • 3-axis active digital readout by HEIDENHAIN • Travel (X axis): 300 mm • Travel (Y axis): 160 mm • Travel (Z axis): 340 mm • Tool holder: SK 40 • Milling head type: Vertical milling head Ncjdpfx Ajr H E Uijbbol • Speed range: 40 – 2000 rpm • Number of speed steps: 16 • X-axis feed: 290 mm • Y-axis feed: 150 mm • Z-axis feed: 330 mm • Weight: 650 kg • Dimensions: 1200 x 1100 x 1800 mm Accessories: - Active function on X, Y, and Z axes - Coolant system The offer refers to the machine without tooling; tooling may be negotiated separately. On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT. Viewing possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Dear Sir or Madam, We are pleased to offer a Deckel FP1 3-axis universal milling machine with retrofitted safety devices. This newer model features, among other things, central lubrication, an electric coolant pump, and a brake motor. Thanks to the Harting connector, the control cabinet can be quickly disconnected from the machine. The safety components are also connected to the control cabinet using this connector type, ensuring ease of handling is fully maintained. All retrofitted safety devices, which we offer for every machine type, are covered by a 12-month warranty! *The electronic spindle guard is adjustable in multiple axes and is designed to prevent access to the working spindle and protect against flying chips, coolant, etc.* *The electronic spindle safety cover prevents intervention in the rotating spindle stub and tool clamping.* Delivery time: on request Year of manufacture: 1989-1992 Machine no.: 2102-xxxx Table: fixed angle table Travel distances: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1200 mm/min Features and accessories include: 3-axis digital readout with Heidenhain active control, coolant system, central lubrication, machine feet, technical documentation, electronic spindle guard, electronic spindle safety cover Our service promise to you: - We are a certified master company in mechanical engineering - All machines are thoroughly inspected - All lubricants and worn parts are replaced as a precaution - Upon request, we will fully or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools, etc. Ncjdpfx Abex Rvlqobol - Upon request, we can install further accessories such as safety devices - We are happy to handle shipping and/or installation for you

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1972, Orodjarska rezkalna stroja Deckel FP1, nagibna kotna miza, vretenski priklop MK 4. Pribor: nasprotni nosilec, različne vpenjalne puše. Stroj je v obratovalnem stanju. Po dogovoru je možen prikaz pod napetostjo. Nodpfx Ajx Nclnebbocl

Stanje: dober (rabljeno), Interna številka artikla: 25094 Univerzalni rezkalni stroj Deckel FP1 + Oprema (strojni primež / delilna glava / SK40 držala / nasprotni nosilec) V rezkalni glavi je vgrajena vpenjalna puša M16 + Dodatno vpenjalna puša S20x2 Nedpfoxxkwnex Abbscl Stroj je možno pregledati ob priklopu na elektriko.

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP1 Aktiv milling machine with 3-axis Heidenhain digital readout, tilting table. SK 40 spindle taper. Good operational condition, can be demonstrated under power by prior arrangement. Ncsdpfx Aowg S I Tjbbjl

Stanje: pripravljen za uporabo (rabljen), Travel distances: 300 x 150 x 340 mm Universal table: 600 x 260 mm Spindle mount: ISO 40 Spindle speeds: 40–2000 rpm Nsdpfx Abjdr E Apobjcl Digital readout Various accessories MARCELS MASCHINEN CH

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Nsdpfx Aspy Eldebbecl Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Leto izdelave: 1990, Stanje: dober (rabljeno), Various collets and holders, approx. 300 pieces. For DECKEL milling machines FP1, FP2, FP3, FP4. Individual sale upon request. Ncodpfxehvz Iie Abbsl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, EXCELLENT CONDITION Technical Data: >> Year of manufacture: 1990 Machine No. 2102-5046 >> Fixed angular table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle support >> Vertical and horizontal quill - SK40 taper >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electric lubrication Ncedpfx Aeu Um Erjbbol >> Coolant system >> Operating manual, spare parts list Additional information about the machine: Offered is a Deckel FP1 universal milling machine, year 1990, in very good condition. The machine has very little backlash on the handwheels and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed for all three axes is infinitely variable, and the machine is also equipped with rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain controller, you can enter dimensions which the machine will move to automatically. The FP1 was previously used in a training shop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this excellent machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis K&C Digital Readout (new) and stepless feed on 3 axes – Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine No.: 2102-2444 >> Fixed angle table Ncedpfx Abjtwlwzebol >> Spindle speed: 40 – 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout (K+C) newly installed, manufacturer’s warranty and manual included. Display features: set reference points, zero points, enter coordinates, mm/inch conversion, absolute/incremental coordinates, circle functions, hole array, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts list About the Machine: Offered is a universal milling machine Deckel FP1, built in 1983, in excellent condition. The machine has very little backlash, and all leadscrews move smoothly. Even at maximum speed, the milling machine runs quietly. On this newer FP1 model, the feed is continuously variable on all three axes, plus rapid traverse is available in all axes. The FP1 was located in a training workshop and used only occasionally. The oil has been changed. Mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout, Original Condition!!! Technical Data: >> Machine No. 56560/08, year of manufacture approx. 1975 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Njdpfx Abou Nvxmebscl Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: Offered here is a universal milling machine Deckel FP1 in very good original condition. The Deckel has minimal backlash in the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Digital Readout K&C, infinitely variable feed, painted in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 Ncodpfx Abjt Aav Isbsl >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable 100 mm on column >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout K&C newly installed with manufacturer's warranty and operating manual. Display unit: Reference points, zero setting, coordinate input, mm/inch switch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP1 in very good condition. The machine has very little backlash and all spindles move smoothly. All bellows have been replaced. On this newer FP1 model, feed is infinitely variable on two axes; the machine is also equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically inspected. The new K&C digital readout makes working easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C (new) and 3 stepless feed drives – Excellent Condition Nsdpfx Aet Aarpebbjcl Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2867 >> Swivel-tilt rotary table (newly planed) >> Speed range: 40 – 2000 rpm >> Stepless feed drive in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quills – SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout K+C, newly installed with manufacturer's warranty and operating manual. Readout features: setting reference points, zero points, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole arrays, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a Deckel FP1 universal milling machine, year 1985, in outstanding condition. The machine has minimal handwheel backlash and all spindles move smoothly. Even at maximum spindle speeds, the machine runs very quietly. On this newer FP1 model, feed drive is steplessly adjustable on all three axes, and rapid traverse is also available. The oil has been changed. Machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power onsite.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780, as new! Technical data: - Machine No.: 2101-51084, year 2011 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed on 2 axes - Drive power: 1 / 1.5 kW - Travel X/Y/Z: 300/150/340 mm - Vertical quill SK40 and horizontal quill SK40 - Drawbar system: S20x2 - Weight approx. 700 kg Accessories and equipment: - 3-axis digital readout Heidenhain ND 780 - Hydraulic vice - Collets - Tool holders - Milling cutters - Operating manual - Coolant system About the machine: Njdpfswpi Dqsx Abbocl Offered here is a Deckel FP1 universal milling machine, repowered by FPS, in like-new condition. Included accessories are a hydraulic vice with swivel base, collet chucks, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar type: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik Nsdpfx Asvb Ud Uobbscl >> Coolant system >> Machine feet About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Nedpfxsu Racre Abbocl Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Ncjdpfxeu T D Nrs Abbel Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Very good CONDITION Technical Specifications: - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: - 3-axis digital readout Heidenhain TNC111 - Coolant system - Operating manual, spare parts diagram Ncodpju Nvwvsfx Abbol About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis Heidenhain ND 780 digital readout - Excellent Condition! Technical Data: >> Machine No.: 55249/08, Year: 2010 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar thread S20x2 Ncodpoxu Hbhsfx Abbsl >> Weight approx. 700 kg Accessories and Features: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic machine vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the Machine: Offered is a Deckel FP1 universal milling machine, professionally repowered by FPS and in like-new condition. The accessories include a hydraulic machine vice with swivel base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout enables easier and more precise work. Take the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.