Fp3 nakup rabljenega (125)

Stanje: dober (rabljeno), Leto izdelave: 1975, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories include various collets and milling arbors, as well as a tailstock. Machine is in good operational condition and can be demonstrated under power by prior arrangement. Iedpou Ezb Eofx Ah Dsbc

Stanje: rabljeno, x-axis travel: 490 / 500 mm y-axis travel: 290 / 300 mm z-axis travel: 370 / 380 mm Spindle speeds: 40 - 2,000 rpm Feed rates: 10 - 500 / + 1,500 mm/min Quill stroke: 95.0 mm Table size: 420 x 800 mm T-slots: 9 x 12 / A 45 mm Motor power: 4.0 kW Weight: 1,250 kg Required space approx. 1,550 x 1,800 x 1,745 mm From a maintenance workshop (Lufthansa) Good / well-maintained condition With extensive special accessories (!!) Features: - Robust / high-performance universal milling machine - Includes HEIDENHAIN digital readout - 1x tilting angle support table, 420 x 800 mm - 1x T-slot vertical table (cross slide) - 1x DECKEL double swiveling milling head * Swivable in 2 axes * Extendable quill - Horizontal milling spindle (without counter support) - Automatic feeds in X/Z/Y axis * Including rapid traverse .. 1,500 mm/min - 1x RÖHM hydraulic vice - Central lubrication system Isdpfx Ahexabgvj Dobc - Coolant system - Adjustable machine lamp - Splash guard tray - Separate control cabinet - Drawer cabinet with various accessories * Tool holders / milling cutters, etc. - 1x indexing head - Operating instructions (PDF)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture: approx. 1975 Machine No.: 0681 >> Swivel-tilt table (completely overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on all 3 axes >> Drive power: 3 kW >> Travel (X/Y/Z): 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill – SK-40 >> Drawbar system: M16 >> Weight: approx. 1300 kg Accessories and Features: Ibodpfx Ahewkhr Ae Doc >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication About the Machine: Offered here is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swivel-tilt table is as new. An oil change has been carried out. Mechanically and electrically inspected. The digital readout allows for easier and more precise operation. Take the opportunity to inspect and test the Deckel on site under power.

Leto izdelave: 1976, Stanje: generalkompletno obnovljen (rabljeno), Universal tool milling machine Manufacturer: DECKEL Model: FP 3 Year of manufacture: 1976 – overhauled, newly painted RAL 7035 light grey / RAL 7012 basalt grey RAL 5008 grey blue Machine no.: 1601 Milling head type: 2027 Milling head number: 1483 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 800 x 420 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Central lubrication, manual actuation - Coolant device - Operating instructions -Used, as seen- Iedpfxed S Hzte Ah Dsbc

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Dear Sir or Madam, We are offering milling machines of the Deckel FP3 type. The machine is at least technically inspected in our workshop and is therefore fully operational. We would be very pleased to receive your inquiry! Delivery time: upon request Dimensions: 2.00x1.60x1.90m (LxWxH) Weight: approx. 1500kg X-axis travel: 500mm Y-axis travel: 300mm Z-axis travel: 380mm Table clamping surface: 800x420mm Spindle speed range: 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Isdpfx Ajq H Eabeh Djbc Feed axes: X, Y, Z Feed rate: 10–500mm/min Rapid traverse: approx. 1500mm/min Further equipment and accessories: available on request Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - If desired, we can completely or partially overhaul the selected machine - You are free to choose the paint color of the selected machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further equipment such as safety devices - We are happy to handle shipping and/or installation for you

Stanje: rabljeno, Motor power 3 kW Total power requirement 3 kW Weight 1,400 kg O F F E R We can offer you from stock, subject to prior sale and errors: DECKEL Universal Tool Milling Machine with FAGOR 3-axis Digital Readout Type FP 3 Year Serial No. Table travel: longitudinal, motorized / manual 490 / 500 mm vertical, motorized / manual 370 / 380 mm Transverse milling slide travel, motorized / manual 290 / 300 mm Fixed angle table 2230 420 x 800 mm Installation height under spindle 90 - 470 mm Spindle taper SK 40 18 spindle speeds 40 – 2,000 rpm 18 feed rates 10 – 500 mm/min Rapid traverse 1,500 mm/min Spindle drive motor 3 kW Total drive 3 kW - 380 V - 50 Hz Weight 1,400 kg Accessories / Special features • FAGOR 3-axis digital readout V 300 (glass scales) with advanced functions such as chain dimensions, absolute dimension, mm/inch switching, etc. • Movable DECKEL universal vertical milling head, tiltable +/- 90° • Original DECKEL tool cabinet with extensive accessories such as various tool holders, collet chuck with approx. 20 collets, long arbor, various spacer rings, driving dogs, clamping devices, operating tools, etc. • DECKEL large, fixed angle table, 420 x 800 mm, mounted • DECKEL universal dividing head with direct and indirect indexing, various index plates • Additional manual DECKEL universal rotary table ? 380 mm with direct and indirect indexing, various index plates • Coolant equipment, chip tray, central lubrication, separate control cabinet, operating manuals Condition: Very well-maintained condition! Ideal machine for training workshops or small batch production! Please click here for a video of the machine: FP3/4 Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice Isdpfev Nq Skox Ah Dobc We always have a wide selection of conventional and CNC milling machines in stock. Please contact us!

Stanje: rabljeno, Technical details: X-axis travel: 600 mm Y-axis travel: 300 mm Ibsdeu U E T Iepfx Ah Djc Z-axis travel: 360 mm Speed range, max horizontal: 40–2000 rpm Spindle taper (vertical/horizontal): SK 40/SK 40 Speed range (max permissible): 40–2000 rpm Feed rate: 2–3600 mm/min Quill travel: 80 mm Table size: 810 x 420 mm Total power requirement: 3 kVA Machine weight approx.: 1300 kg Machine dimensions approx. (LxWxH): 1.8 x 1.35 x 1.95 m Milling machine with shaping head Stroke length: 32–80 mm, with 10 double strokes, 24–285 strokes/min Heidenhain 3-axis digital readout *

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2309-0121 / 2779 Generalüberholt, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 300 mm, pomik po osi Z: 400 mm, največja hitrost vrtenja: 25 obr/min, vrtljajska hitrost (min.): 2.500 obr/min, Deckel FP3-LV tip 2309 z aktivnim digitalnim prikazovalnikom Ta oldtimer iz leta 1978 je bil leta 2008 temeljito obnovljen pri FPS in postavljen v stanje novega stroja. Ibjdpjxnyfysfx Ah Djc Deckel FP 3LV - V pomeni podaljšan pomik v osi X - s 3-osnim digitalnim prikazovalnikom Heidenhain - s brezstopenjsko nastavljivim pomikom 5–500 mm/min - tog kotni delovni stroj z vpenjalno površino 550 x 1400 mm - hitri pomik 1500 mm/min + počasni pomik 4 mm/min3 - notranji stožčasti vpenjalni priključek SK40 z Deckel navojem za žage S20x2

Stanje: dober (rabljeno), Leto izdelave: 1975, Deckel FP3L with 3-axis Heidenhain digital readout, fixed table, vertical milling head, SK 40 S20x2 spindle taper. Good, ready-to-use condition. Can be demonstrated under power by prior arrangement. Iodpfxeuclbzo Ah Dobc

Stanje: rabljeno, Prodajam na slikah vidno orodno rezkalno stroj nemškega podjetja Deckel, model FP3A. Stroj omogoča delo v ročnem, polavtomatskem in avtomatskem načinu. Upravljanje prek G-kod. Vrsta upravljanja: CNC 2102 Deckel. Ibodpfjxluu Rsx Ah Dsc

Stanje: dober (rabljeno), Skladiščna številka: 3012 Proizvajalec: Deckel Strojna številka: 3686 Ibjdpfoxcillex Ah Djc Tip / Model: FP 3 Pomiki x-y-z: 500 - 300 - 380 mm Hod pinole: 95 mm Miza: 650 x 370 mm Območje vrtljajev: 40 do 2.000 vrt/min Vretena: SK 40 Pomiki: 10 do 500 mm/min Priključna moč: 2,2 kW Dodatki/Oprema: univerzalna vrtljiva, nagibna in obračalna miza; digitalni prikaz Elesta Stanje: dobro Teža: 1,3 t Dimenzije: 1.500 x 1.800 x 1.800 mm

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system Iodpfx Ahsu Dm E Hj Dobc About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: dober (rabljeno), Leto izdelave: 1998, Machine is dirty. Ibodpfovptmksx Ah Djc Technical condition is good. Rotary and swivel table is installed.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal Tool Milling Machine Make: DECKEL Model: FP 3 L Aktiv Year of manufacture: unknown – overhauled, newly painted, Iedpjh Rv U Esfx Ah Dsbc RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2302-2319 Milling head type: 2271 Milling head no.: 700-0883 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, electric - Coolant device - Operating manual - Drill bit grinding attachment with diamond wheel - used, as seen -

Stanje: dober (rabljeno), Leto izdelave: 1981, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper and S20x2 spindle mount. In good, operational condition. Can be demonstrated under power by prior arrangement. Ibsdewg S Nkspfx Ah Doc

Stanje: dober (rabljeno), Various Deckel FP3 milling machines are available for sale, all of which are in good condition. A particular feature of this machine is the mounted table, which can be tilted, rotated, or shifted. Purchasing the machine with a standard milling table is also possible. The machine has been cleaned and tested by us. On request, safety devices can also be installed at an additional cost. L x W x H: approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg TECHNICAL DATA Digital readout: 3-axis digital display Travel: X-axis: approx. 500 mm Y-axis: approx. 300 mm Z-axis: approx. 380 mm Spindle: Speed range: approx. 40 - 2000 rpm Tool holder: ISO 40 Iodoiz T Exspfx Ah Dsbc Drive power: approx. 3.8 kW Tool clamping: manual Feeds & rapid traverses: on all 3 axes Feed rate: approx. 10 - 500 mm/min Rapid traverse: approx. 1.5 m/min Prices excl. VAT Viewing by appointment possible. Contact us – our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, številka stroja/vozila: 2820-0419, x-axis travel: 500 mm y-axis travel: 400 mm z-axis travel: 400 (340) mm Table size: 710 x 430 mm Spindle speed range: 40 – 4,000 rpm Feed rate range: 2 – 3,600 mm/min Rapid traverse: 4.0 m/min Swivelling head +/-: 90° Quill stroke: 80 mm Spindle taper: SK 40 Control: Contour 3 Total power requirement: 5.5 kW Ijdpfsh Ra Nisx Ah Debc Machine weight approx.: 1,900 kg Space requirement approx.: 2 x 1.4 x 1.8 m CNC-controlled universal milling machine with Dialog 4 control, vertical head swivels +/- 90° with 80 mm quill stroke, feeds and rapid traverses on 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop, machine lighting, chip splash guard enclosure with chip tray, pendant control panel and electronic handwheel. The machine is in good condition.

Stanje: rabljeno, X-axis travel 500 mm Y-axis travel 400 mm Z-axis travel 400 mm Control system: Dialog 12 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if stated in the additional information. Ibedowxfn Ropfx Ah Doc Subject to changes and errors in the technical data and specifications as well as prior sale!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP 3 *Partially Overhauled* Item number: 07-07-090 Manufacturer: Deckel Delivery time: on request Very good overall condition Machine partially overhauled Delivery time: on request – subject to prior sale Year of manufacture: approx. 1980 Dimensions (L x W x H): approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg Digital Readout: 3-axis digital readout Sino *New* Travel: X-axis: approx. 500 mm Y-axis: approx. 300 mm Z-axis: approx. 380 mm Table clamping surface: approx. 800 x 420 mm Iodsrivr Tjpfx Ah Djbc Spindle: Speed range: approx. 40–2000 rpm Spindle taper: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feeds & rapid traverse: on all 3 axes Feed range: approx. 10–500 mm/min Rapid traverse: approx. 1.5 m/min Accessories: Vertical & horizontal milling attachment Coolant system *New* Complete documentation Various clamping spanners Horizontal spindle cover Safety handwheels 3-axis digital readout SINO *New* Tilting-swivelling table Work lamp *New* Machine feet *New* Further accessories available on request Price and additional technical details on request

Leto izdelave: 1990, Stanje: dober (rabljeno), Various collets and holders, approx. 300 pieces. Ibedpfx Ahohvz Iij Dec For DECKEL milling machines FP1, FP2, FP3, FP4. Individual sale upon request.

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP3 orodjarska rezkalna stroj z 3-osnim Heidenhain digitalnim prikazovalnikom, togim mizo, vretenom SK 40, dodatki: različne napenjalne tule in držala rezk, nasprotni nosilec. V dobrem, takoj uporabnem stanju. Po dogovoru možno predstavitev pod napetostjo. Isdpfxjxdr Uxj Ah Dsbc

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 1994, številka stroja/vozila: 2803-2194, Universal Milling Machine Deckel FP3 with Deckel Analog 4 Control Unit (defective) Technical Specifications: - Year of manufacture: 1994 - Table diameter: 500 mm - Spindle speed: 40 - 2000 rpm - Drive power: 3 kW - Travel X/Y/Z - Weight: approx. 1500 kg Isdpfx Aheu U I Ius Dsbc Accessories and Equipment: - Deckel Analag4 display, Grundig Dialogsteuerung 4 (defective, exact fault unknown) About the Machine: Offered is a Deckel FP3 NC universal milling machine in good external condition. The spindles move smoothly. The rotary T-slot table is in good condition. Mechanically ready for operation; however, the control unit is defective. Exact fault is unfortunately unknown. Sale by customer order, without any warranty, offered as a source of spare parts.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, Milling Machine Deckel FP 3 *Partially Refurbished* Item Number: 07-07-091 Manufacturer: Deckel Very good overall condition Machine partially overhauled Delivery time: immediately available, in stock Year of manufacture: approx. 1980 Dimensions (L x W x H): approx. 2000x1600x1900 mm Ijdpfx Ahovupuuj Debc Weight: approx. 1500 kg Digital Readout: 3-axis digital readout Sino *New* Travel paths: X-axis: approx. 500 mm Y-axis: approx. 300 mm Z-axis: approx. 380 mm Clamping surface: approx. 800x420 mm Spindle: Speed range: approx. 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Manual tool clamping Feeds and rapid traverse on all 3 axes Feed range: approx. 10-500 mm/min Rapid traverse: approx. 1.5 m/min Accessories: Vertical & horizontal milling attachments Coolant system *New* Complete documentation Various clamping wrenches Horizontal spindle protective cover Safety handwheels 3-axis digital readout SINO *New* Machine feet *New* Work lamp *New* Further accessories on request Price and additional technical details upon request

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1978, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper, S20x2 spindle mount. Ready-to-operate condition. Machine can be demonstrated under power by prior arrangement. Iedpfeug T Dxex Ah Debc

Leto izdelave: 1975, Stanje: dober (rabljeno), Deckel FP3L with adjustable angle table, vertical milling head, SK 40 spindle taper, S20x2 thread. In good, operational condition. Can be demonstrated under power by appointment. Iedpfx Asildwxeh Dobc