Rezkalni stroj

Deckel FP3 Aktiv

Stanje: dober (rabljeno), Leto izdelave: 1981, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper and S20x2 spindle mount. In good, operational condition. Can be demonstrated under power by prior arrangement. Bwsdewg S Nkopfx Aiqsu

Stanje: novo, 3-Roller Plate Bending Machine Ostas ORM 1270 x 140 Technical Specifications: Special features included in the price: - Motorized adjustment of the lower rolls - Hardened rollers - Motorized adjustment of the rear roll - Digital readout Sheet width: 1270 mm Sheet thickness max.: 5.0 mm Sheet thickness (pre-bending): 4.0 mm Roll length: 1270 mm Roll diameter: 140 mm Weight: 1400 kg Dimensions (L x W x H): 2500 x 800 x 1100 mm Motor power: 2.2 kW Equipment: - Upper and lower roller electrically driven - Upper roller swing-out Bwjdpfx Aefpmz Heiqou - Cone bending device - Asymmetric roller arrangement - Self-braking main motor - Separate control and operating panel - Safety cable - CE mark

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal Tool Milling Machine Make: DECKEL Model: FP 3 L Aktiv Bjdjh Rv U Espfx Aiqewu Year of manufacture: unknown – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2302-2319 Milling head type: 2271 Milling head no.: 700-0883 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, electric - Coolant device - Operating manual - Drill bit grinding attachment with diamond wheel - used, as seen -

Leto izdelave: 1982, stanje: generalkompletno obnovljen (rabljeno), Universal tool milling machine Brand: DECKEL Model: FP 3 Aktiv Year of manufacture: 1982 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2201-5539 with warranty Geometric inspection with test protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread M16 - Central lubrication, manually operated - Coolant system - Operating manual Bwjdpfopn Rgvjx Aiqeu Used, as seen The machine corresponds technically to the standard of its year of manufacture.

Stanje: rabljeno, Leto izdelave: 2011, proizvajalec krmilnikov: Siemens, model krmilnika: C200-4D SL, Description: General: Year of manufacture: 2011 Control: Siemens 840 Dsl (C200-4D SL) Bar capacity: 65 mm Milling spindles: 18,000 rpm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35.5 kW Max. torque: 170 Nm C-axis: 0.001° Z-axis: 390 mm Bar capacity: 65 mm Chuck cylinder: Hollow clamping cylinder Chuck: 3-jaw chuck Counter spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35.5 kW Max. torque: 170 Nm C-axis: 0.001° X-axis: 600 mm Z-axis: 390 mm Bar capacity: 65 mm Chuck: 3-jaw chuck Tool carrier I: Technology: Milling spindle on cross slide Speed: 18,000 rpm Tool holder: HSK 40 X-axis: 350 mm Y-axis: 160 mm (+/- 80 mm) Bwodpfsy Sq T Sox Aiqsu B-axis: 230° Tool carrier II: Technology: Milling spindle on cross slide Speed: 18,000 rpm Tool holder: HSK 40 Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool magazine: Technology: Chain magazine Number of stations: 80 pcs Tool changer: Double gripper Max. tool length: 180 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system with filter Workpiece removal: Gantry loader

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal Tool Milling Machine Make: DECKEL Model: FP 3 LV Aktiv Year of manufacture: 1988 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2309-0146 Milling head type: 2271 Milling head no.: 700-0887 Warranty: 12 months, single-shift operation from delivery date, covering the mechanics overhauled by us. Electrical and electronic components are excluded, as they have only undergone a functional test. For machines located outside our North Bavarian sales territory, travel expenses are to be borne by the customer. Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawbolt thread M 16 - Central lubrication, manual - Coolant system - Operating instructions Bsdpfx Aistdnb Esqjwu Used, sold as seen. The machine is technically in accordance with the standard from the year of manufacture.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed - Excellent Condition Technical Data: >> Year of manufacture: 1983 | Machine no.: 2201-5919 >> Fixed angle table (refurbished) >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head adjustable by 200 mm on column >> Vertical and horizontal quill – SK40 retractable >> Drawbar system: S20 x 2 >> Weight approx. 1500 kg Equipment and Accessories: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central electric lubrication Bjdoy D Tl Iopfx Aiqswu About the Machine: For sale is a Deckel FP3 universal milling machine in very good condition. The machine has minimal backlash, and all spindles move smoothly. On this later FP3 model, the feed rate can be infinitely adjusted on all three axes, plus there is a rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With this Heidenhain CNC control, you can input target dimensions and the machine will move to position automatically. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site. The machine is available immediately.

Stanje: rabljeno, Universal tool milling machine MAHO type MH 800 P with digital display and HEIDENHAIN TNC 121 path control Serial no. 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently rarely used in the workshop of an electronics company. Travels: X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm, 18 steps Feed rate X, Z axis: 10-500 mm/min, stepless Feed rate Y axis: 5-250 mm/min, stepless Rapid traverse X, Z axis: 1.4 m/min Rapid traverse Y axis: 0.7 m/min Quill travel vertical: 100 mm Quill feed vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill travel horizontal: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC path control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02 - 0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in machine base - Universal rotary table, 360° rotatable, 30° swivel and tiltable, 225 mm cross travel Bedpfxjv Amryj Aiqswu - Rotary table with direct division 72 x 5° and indirect division via indexing disc 1:120 = 1 rev. = 3° - Swiveling operator panel - Central lubrication - Operating manual - Machine mounted on a steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Required floor space L x W x H 2650 x 2000 x 2450 mm Weight 3700 kg + 550 kg steel plate Total weight 4250 kg (measured) In very good condition

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system Bjdpfju Dm E Hex Aiqswu About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: dober (rabljeno), Offertă o mașină de frezat universală DECKEL FP1 aktiv, parțial recondiționată, cu afișaj digital Heidenhain pe 3 axe TNC 113 și masă rotativă divizor cu mandrină cu trei bacuri. Construcția compactă o face ideală pentru ateliere hobby mai mici sau garaje. Producător: DECKEL Tip: FP1 Nr. de serie: 2102-3314 - Cursă de lucru X/Y/Z: 300x160x340 mm - Turație arbore principal: 40–2000 rpm - Avans continuu pe toate cele trei axe - Avans rapid pe toate cele trei axe - Cap de frezat vertical - Reglare verticală 100 mm Bwsdpfsxmgguox Aiqou - Dispozitiv de frezare orizontală - Afișaj digital Heidenhain 3 axe TNC113 - Sistem de răcire - Masă rotativă divizor cu mandrină 3 bacuri Putere totală instalată: 1,9 kW Dimensiunile utilajului L x l x h: 1,30 x 1,10 x 1,60 m Greutate: aprox. 850 kg Prețul este net, ex works, încărcare inclusă. Stare: folosită.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Sale on behalf of customer. SCM Gabbiani P80 Panel Saw – Year of manufacture 2021 – 4300 x 4300 mm For sale is a state-of-the-art SCM Gabbiani P80 panel dividing saw from 2021, in very well-maintained condition. The machine has been used in an active joinery shop and impresses with its precision, speed, and high reliability in daily operation. Technical specifications: Bodpfx Aoylp S Eeiqewu Cutting length: 4300 mm Cutting width: 4300 mm (large version) Cutting height / blade projection: 80 mm Main saw blade diameter: Ø 340 – 370 mm Scoring saw blade diameter: Ø 200 mm Main saw blade speed: approx. 4,650 rpm Scorer speed: approx. 5,850 rpm Drive & Power: Main motor: approx. 7.5 – 15 kW (depending on configuration) Scoring unit: approx. 1.3 – 1.5 kW Total connected load: approx. 12 – 15 kW Voltage: 400 V / 50 Hz Speeds: Saw carriage: 6 – 60 m/min (infinitely variable) Pusher speed: up to 60 m/min Pneumatics & Extraction: Compressed air demand: approx. 300 NL/min / 7 bar Extraction capacity: approx. 2,200 – 2,400 m³/h Extraction ports: 4 x 120 mm Equipment & Features: Air cushion tables for easy handling of large panels Floating clamps for precise cuts Scoring unit for chip-free cutting PC/PLC control (Maestro system possible) Robust industrial construction for high duty cycles High repeatability and cut quality Material suitability: Suitable for: Chipboard MDF / HDF Multiplex / Plywood Coated panel materials The machine is fully operational and ready for use. Inspection possible by arrangement at any time. Location: Germany If interested, please get in touch – further photos, videos or details available on request. Dismantling and delivery available at extra charge.