Rezkalni stroj
Deckel FPS FP3 Aktiv

Name: Deckel FPS FP3 Aktiv
Brand: Deckel FPS
Availability: InStock

Stanje

Rabljeno (popolnoma funkcionalen)

Lokacija

Ubstadt-Weiher Nemčija

Podatki o stroju

Oznaka stroja:: Rezkalni stroj

Proizvajalec:: Deckel FPS

Model:: FP3 Aktiv

Stanje:: skoraj kot novo (rabljeno)

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

Lokacija:: Großer Sand 19-21, 76698 Ubstadt-Weiher, Deutschland

Pokliči

Podrobnosti ponudbe

ID oglasa:: A17541913

Posodobitev:: nazadnje dne 29.10.2024

Opis

Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition

Technical Data:

• Year of manufacture: 1980 | Machine No. 2201-5045
• Fixed angle table
• Spindle speed: 25 - 2,500 rpm
• Infinitely variable feed rate on all 3 axes
• Rapid traverse on all 3 axes
• Motor power: 2.0 / 4.0 kW
• Spindle brake
• Travel (X/Y/Z): 500 / 300 / 400 mm
• Vertical milling head movable on spindle head by 200 mm
• Extendable vertical and horizontal quill – SK40
• Drawbar system M16
• Weight: approx. 1,500 kg

Equipment and Accessories:

• 3-axis Aktiv Digital Readout (Heidenhain, latest version)
• Coolant system
• Central lubrication system

Njdpfx Aeu Dm E Hsbrjwh
About the Machine:

Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2007

80 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 7251 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Poljska

710 km

Vertikalni obdelovalni center
HAASVF-4

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Krmilna enota Blagovna znamka: HAAS Model: NGC Nodpfxox Enh Ts Abrewh Glavni pogon Število osi: 3 Pomiki Pomik osi X: 1270 mm Pomik osi Z: 635 mm Pomik osi Y: 508 mm Ta 3-osni vertikalni obdelovalni center HAAS VF-4 je bil izdelan leta 2020. Omogoča pomik v osi X 1270 mm, v osi Y 508 mm in v osi Z 635 mm ter podpira obremenitev mize do 1588 kg. Opremljen je z 20-postajnim linijskim zalogovnikom orodja, polžastim transporterjem ostružkov ter merilno sondo Renishaw OTS. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra HAAS VF-4. Za več informacij o tem stroju nas kontaktirajte. Vrste uporabe: Rezkanje

Poglej podrobnosti

Mali oglas

Wien

248 km

Stroj za brizganje
BOY

Pokliči

Mali oglas

Uravnavanje valja DREHER 1645-AV Modell 738

Eislingen/Fils

489 km

Uravnavanje valja
DREHER1645-AV Modell 738

Pokliči

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Nwsdpfx Abecxxx Rsrjh Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition

Poglej podrobnosti

Mali oglas

Navpični obdelovalni center DECKEL MAHO DMU 125 P hi-dyn

Düsseldorf

823 km

Navpični obdelovalni center
DECKEL MAHODMU 125 P hi-dyn

Pokliči

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 33.831 h, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 880 mm, pomik po osi Z: 800 mm, model krmilnika: '3D contouring control Millplus, teža obdelovanca (maks.): 1.000 kg, skupna dolžina: 7.000 mm, skupna širina: 3.500 mm, skupna masa: 3.902 kg, hitrost vretena (min.): 18.000 obr/min, moč vretenovega motorja: 15.000 W, Year of manufacture: 2000 CNC control: 3D contouring control Millplus Axes Travel X-axis mm: 1250 Travel Y-axis mm: 880 Nwsdpexvrbijfx Abreh Travel Z-axis mm: 800 C-axis indexing degrees: 360º (0.001) Feed rate m/min: 40 Rapid traverse m/min: 40 NC milling/turning table: Number of pallets: 1 Pallet dimensions mm: Ø1000 Max. workpiece weight kg: 1000 Max. torque Nm: 7900 Spindle Max. spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40% duty cycle/continuous) Cooling Tank capacity liters: 600 Tool system Tool holder: CAT 40 Number of tools in magazine: 60 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Rinsing gun Prepared for RENISHAW probe Accuracy package Prepared for internal coolant (40/80 bar) Paper band filter Machine run time: Hours powered on: 33831 Spindle working hours: 6328 Total power requirement kVA: 55 Base machine: Dimensions/Weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Poglej podrobnosti

Mali oglas

Stroj za brušenje površin - horizontalni ELB-ORION 1555

Ennepetal

802 km

Stroj za brušenje površin - horizontalni
ELB-ORION1555

Pokliči

Stanje: rabljeno, Leto izdelave: 1990, Grinding length: 1500 mm Grinding width: 550 mm Workpiece height: 400/450 mm Table size: 1900 x 450 mm Table speed: 1 - 25 m/min Automatic cross feed: 0 - 60 mm/stroke Grinding wheel dimensions: 400 x 100 x 127 mm Spindle speed: 1400/2800 rpm Nwjdpfx Abowlvirerjh Total power requirement: 15 kW Voltage: 380 V Machine weight: approx. 5 t The machine was overhauled in 2015 and retrofitted with a modern control system. Machine is equipped with coolant system, automatic vertical feed, wheel dressing device, and wheel holders.

Poglej podrobnosti

Mali oglas

Naprava za obračanje motornega rezervoarja in kotla OERLIKON RB-AFV/FV 4000 Syn

Rödermark

625 km

Naprava za obračanje motornega rezervoarja in kotla
OERLIKONRB-AFV/FV 4000 Syn

Pokliči

Leto izdelave: 2009, stanje: dober (rabljeno), številka stroja/vozila: 120P1109, OFFER 21407 Motorized Vessel/Drum Rotator with Rail-Mounted Carriage Technical Specifications: Nsdpfx Abjhcnhmerewh - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per vessel rotator: 20,000 kg - Workpiece diameter approx.: 500 – 3,500 mm - Support roller center distance adjustable via trapezoidal-thread spindle - Roller diameter: 500 mm - Roller width: 150 mm - Powered unit with dual-side drive - Infinitely variable rotation speed - Handheld remote for forward and reverse operation - Drive: 400 V - Both units mounted on rail carriages - Required space for powered unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Required space for idler unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit: approx. 2,500 kg - Weight idler unit: approx. 1,800 kg

Poglej podrobnosti

Mali oglas

Oftersheim

599 km

Navpični obdelovalni center
DMG635V

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, CNC obdelovalni center DMC 635V Leto izdelave: 2006 Krmilnik: Heidenhain TNC 530i Delovne ure krmilnika: cca 58.400 h Ure programskega delovanja: cca 19.980 h Po nalepki v elektro omari sta bila vreteno in motor zamenjana januarja 2019 pri 10.660 h. Za to ni dokazil. Stroj deluje mirno. Pomiki osi: X 635 Y 510 Z 460 Vpenjalo orodja: SK 40 Menjalec orodij na 20 mest Nwodpfxew Tir Ue Abrsh Miza: 790×560 S transporterjem za ostružke Teža cca 3700 kg Ponudba velja izključno za podjetja v skladu s §14 BGB Prodaja zasebnikom ni možna.

Poglej podrobnosti

Mali oglas

Navpični obdelovalni center Hurco VMX 42

Weidenthal

272 km

Navpični obdelovalni center
HurcoVMX 42

14.000 €

EXW VB plus DDV

Pokliči

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.060 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, model krmilnika: Ultimax, skupna višina: 2.800 mm, skupna dolžina: 2.200 mm, skupna širina: 2.400 mm, širina mize: 610 mm, dolžina mize: 1.270 mm, moč vretenovega motorja: 18.000 W, število vreten: 1, število mest v zalogovniku orodij: 24, Oprema: dokumentacija / priročnik, transportni trak za ostružke, 3 axes Tool holder SK 40 Internal cooling 35 kVA Nsdpewtdzrsfx Abrewh approx. 7550 kg Comprehensive tool package available separately

Poglej podrobnosti

Mali oglas

Namizni vrtalnik ALZTRONIC i14 ALZMETALL ALZTRONIC i14

Waiblingen

519 km

Namizni vrtalnik ALZTRONIC i14
ALZMETALLALZTRONIC i14

Pokliči

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: PRJ069841, ALZMETALL bench drilling machine, drilling capacity in steel 14mm. Short spindle MK2, spindle stroke: 80mm, throat depth: 190mm, column diameter: 65mm, machine table usable area: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-to-table distance min./max.: 75/357mm, machine table height adjustment via handwheel, machine base plate, usable area: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-to-base plate distance min./max.: 437/437mm, manual feed, machine height without options: 825mm, net weight: 83 kg. - Continuously variable speed 230-4000 rpm Nsdpfx Ajlub Htsbrjwh Standard equipment: 5" TFT LCD display with touch function: Manual input for target spindle speed, actual speed display, integrated drilling depth indicator with touch zero point transfer, virtual drilling depth scale on display, machine status displays and warning notices on display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, connection plug pre-installed, 2m cable length, three separate push buttons for clockwise – counterclockwise – stop, spindle holding via brake function, spindle guard with electrical interlock, lockable main switch, mushroom push-button (latching) for EMERGENCY STOP, stepless speed adjustment via potentiometer, protection class IP54, spindle guard with electrical interlock, finish: DD textured varnish signal white RAL 9003, PANTONE 7545c, black. Delivery time: from stock Waiblingen Beinstein.

Poglej podrobnosti

Mali oglas

Dornhan

547 km

EDM 312MF30
ExeronSLM

Pokliči

Leto izdelave: 2022, obratovalne ure: 108 h, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: SN2120, EDM312MF30-SLM (second-life machine) Technical Data: Travel distances: 450x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance table/electrode holder: 150/450mm Max. workpiece weight: 800kg Max. dielectric fluid: 700l Dimensions (W x D x H): 2700x1800x2350mm Machine weight: 2500kg Power supply: 3/N/PE 400/230V 50Hz Connected load: 6.7 KVA Equipment: Color: newly painted in light grey + tele grey New control cabinet New APC910/2 controller (Win10) MF30 V2.8 operating interface New B&R drives with Endat interface Touch screen display Exopuls+ 60A generator Rev.4 5-position tool changer (WZW) Contact protection operable via push button Linear scales on all axes X, Y, Z (Fagor) 2 cartridge filters Nwjdpfxshtrdyo Abreh Termogamma cooling unit Completely new machine wiring New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve terminal CO² extinguishing system C-axis Hirschmann 50 rpm, holding brake overhauled Handheld control panel with enabling switch Automatic lowering tank Clamping chucks: Erowa IST, Hirschmann, 3R 12 months warranty Transport On-site commissioning Training

Poglej podrobnosti

Oglašujte tukaj