Mafell Erika 85 L nakup rabljenega (11)

Stanje: rabljeno, Lahka namizna krožna žaga Mafell Erika za delavnico in gradbišče, vključno z različnimi vodili. Premer žaginega lista: 280 mm Višina reza: 70 mm Bcjdpfx Abjx Rv Tzshju Motor: 220 V // 1,3 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, MAFELL Erika table saw with a side-adjustable fence Bsdpjud At Rjfx Abhocu

Stanje: pripravljen za uporabo (rabljen), Tehnične značilnosti Moč in motorji Bsdpfjt Dgapex Abhecu Skupne dimenzije Teža: 9 kg

Stanje: rabljeno, rabljeno, v odličnem stanju, malo uporabljeno Proizvajalec: Mafell Tip: MKS 165 E CE-certificirano Motor: 2,7 kW Motor z zavoro Višina reza: 165 mm Bodpfx Aboycxhkshecu Premer rezila: 410 mm Nova cena cca 4.000,00 € Skladišče: 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v videnem stanju, brez garancije in jamstva

Stanje: rabljeno, Leto izdelave: 2017, vključno s 3 HM žaginimi listi rabljeno, v odličnem stanju, malo rabljeno Znamka Mafell Tip MKS 130 EC Letnik 2017 Št. stroja 122338 CE certifikat Motor 2,5 kW zavorni motor Višina reza 130 mm premer lista 330 mm Bsdpfoyclxcsx Abhjcu Skladiščenje: 97447 Gerolzhofen, prost naklad, nezapakiran Predaja v trenutnem stanju, kot je bilo pregledano, brez garancije in jamstva

Obratovalne ure: 7 h, Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Compact stationary system for creating seamless joints – for a seamless look as if made from a single piece. An optional processing table is also available. Bjdpfx Asd St R Sjbhjcu - Heating time:

Stanje: dober (rabljeno), Mafell Tenoning Machine ZAF 160 – Professional Tenoner For sale is a Mafell ZAF 160 tenoning machine, ideal for carpentry workshops, timber construction, and restoration businesses. This machine enables highly precise tenon joints, even with large timber cross-sections and angled milling operations. Technical Specifications Maximum Timber Dimensions: - Right-angled: 320 × 160 mm - Tenoning at 60° angle: 160 × 160 mm - For flattening (ridge joint/corner joint etc.), right-angled and up to 45° inclination: 230 × 160 mm Clamping of Workpiece: manual Tenon Size Adjustment: manual, via scale Variable Tenon Length: up to 110 mm Flattening in one pass: max. 110 mm Bcjdsx D Az Nepfx Abheu Maximum Flattening Width: 160 mm Working Height: 750 mm Support with Scale (Length Stop): 3 m Motor: - Three-phase, 400 V / 50–60 Hz - Power Consumption: 6000 W - Output (Nominal Load): 4500 W - Spindle Speed: 6670 rpm - Cutting Speed: 32.8 m/s - Feed Rate: approx. 2.2 m/min Tool Dimensions: - 100 × 110 mm, carbide-tipped - 165 × 40 mm, carbide-tipped + carbide insert knives Extraction: - Connection: 2 × 100 mm diameter Machine Footprint: approx. 400 × 140 cm Weight: approx. 380 kg An invoice with VAT shown separately will be provided. Price: €10,500 net

Stanje: novo, Machine weight approx. 392 kg Warehouse clearance - display machine, new, available immediately! Description: With the ZAF 250, all types of tenon joints can be produced quickly, accurately, efficiently, and with a perfect fit. Straight tenons, angled tenons, corner and ridge joints – the compact ZAF 250 has you covered. A precise longitudinal scale can be set via a stop. The milling tool, specially developed for the ZAF 250, can be quickly adjusted for different tenon lengths as well as for lap joint milling. The ZAF 250 Vario features precise adjustment options and a clearly structured control panel. A built-in laser helps you position the wood exactly. Result: Millimeter-precise milling in every type of timber! Once the tenon geometry is set, the milling head traces the tenon shape automatically and produces the required tenon – including shoulder cutting, step cutting, and chamfering. For hardwood applications, the ZAF 250 Vario offers an adjustable feed speed. Bcedpfevwgfvsx Abhou Application range: Tenon and lap joint milling up to 60° Materials such as: Solid timber and glued laminated beams Technical Data: Maximum timber dimensions (W x H) at 90°: 500 x 250 mm Maximum timber dimensions (W x H) at 60°: 220 x 250 mm Support length with scale: 3000 mm Feed speed: 0.9 – 2.2 m/min Footprint: 1.5 x 4 m Nominal idle speed: 6670 rpm Rated power consumption: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Scope of delivery: 1x Tenoning and mortising machine ZAF 250 Vario

Stanje: novo, Technical data: Bcodpfx Aowi Nt Eobheu Rated voltage: 230 V Rated input: 3050 W Edge height: 10 - 65 mm Swivel range: 0 - 50° Edge thickness: 0.4 - 3.0 mm Heating-up time: 30 s Max. temperature: 520 °C Feed rate, stepless: 1 - 5.5 m/min Dimensions (L x W x H): 220 x 160 x 360 mm Compressed air connection: 6 - 10 bar Minimum inner radius: 10 mm Weight: 10.8 kg

Stanje: rabljeno, Ex-demo Machine Description: The new ZSX-TWIN Ec carpentry chainsaw is the practical solution for large-size construction timber components. With the development of this dual-motor chainsaw, MAFELL has set a new benchmark, allowing tasks that were previously almost impossible or extremely time-consuming to be completed effortlessly and with precision. With a rated power of 3000 watts, even a single CUprex motor brings a standard 230 V power circuit to its limits. Operating two CUprex motors simultaneously would overload any standard household circuit. By distributing the load across two circuits, the dual-motor ZSX receives the power it needs. This is exactly what a three-phase power supply offers, as each phase is separately protected, preventing circuit overload. Benefits: Thanks to the use of standard power technology, the ZSX TWIN delivers 6000 W rated output while weighing only 20 kg. This allows for longitudinal cuts up to a cutting depth of 400 mm! Corner cut-outs are frequently required in timber construction and solid wood wall processing. The upright position of the cutting tool enables fast and precise production of cut-outs and lap joints, eliminating the need for complex turning of the workpieces. The heart of the ZSX-TWIN Ec is its two 3000-watt single-phase motors, which operate in parallel on two 230 V phases from the three-phase supply. The ZSX can be tilted precisely from -15° to 60° according to the scale. Applications: - Longitudinal and cross cuts - Cut-outs - Suitable for materials such as solid wood, glulam beams Technical Data: - Cutting depth: 400 mm - Cutting depth at 15°: 386 mm - Cutting depth at 30°: 346 mm - Cutting depth at 45°: 282 mm - Cutting depth at 60°: 199 mm - Tiltable on both sides: -15° to +60° - Kerf width: 6.8 mm - No-load speed: 21,000 rpm Bcodpfxsvwfy So Abhju - Rated input power: 2 x 3000 W - Weight: 20.0 kg Scope of Delivery: - 1 ZSX TWIN Ec chainsaw - 1 TWIN HM 400 ripping chain, item no. 006977 - 1 HM 400 fine-cut chain, item no. 006972 - 1 ZSX-Twin Ec transport trolley, item no. 205940 - 1 guide shoe for rail use, item no. 205934 - 1 parallel fence, item no. 204591 - 1 combination screwdriver 6 mm, item no. 093272 - 1 open-ended spanner 13 mm, item no. 093008 - 1 10 m power lead complete with CEE plug 400 V, item no. 087906

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, moč: 6 kW (8,16 KM), Mafell ZAF 250 Demonstration Machine (used max. 2-3 times for demonstration purposes) Item no.: 991201 Scope of delivery: -1 milling head, complete with reversible knives; Ref. no. 202105 -1 support table, Ref. no. 205025 Maximum timber dimensions (W x H) at 90°: 500 x 250 mm Maximum timber dimensions (W x H) at 60°: 220 x 250 mm Support table length with scale: 3000 mm Feed speed: 0.9 – 2.2 m/s Installation area: 1.5 x 4 m Rated no-load speed: 6670 rpm Bsdpowazn Asfx Abhecu Nominal power: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: - With the ZAF 250 Vario, all types of tenons can be produced quickly, accurately, efficiently, and with perfect fit. - Straight tenons, angled tenons, corner and ridge joints – with the compact ZAF 250 Vario, you are on the safe side. - An exact length scale is adjustable via a stop. - The milling tool, specially developed for the ZAF 250, can be adjusted in no time for different tenon lengths as well as for mortise and shoulder cuts. - The ZAF 250 Vario offers precise adjustment options and a clearly arranged control panel. An integrated laser assists you in the exact positioning of the timber. Result: milling with millimetre accuracy in any type of wood! - After setting the tenon geometry, the milling head automatically traces the desired tenon shape — including shoulder, stepped, and chamfered tenons. - The ZAF 250 Vario features an adjustable feed speed for hardwood applications. Fields of application: - Tenon and mortise milling up to 60° - Suitable materials e.g.: solid wood and glued laminated timber Advantages: - Significant time savings – due to simple and rapid adjustment of length, angle, and tenon dimensions. - Maximum timber sizes: 500 x 250 mm at 0° and 220 x 250 mm at 60°. - Minimal space requirements – thanks to a swivelling head, the workpiece always remains in the same position. - No offcut waste – fully extractable.