Univerzalni rezkalni stroji in vrtalke nakup rabljenega (51)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, O F F E R We can offer you, without obligation and subject to prior sale, the following from stock: DECKEL Universal Tool Milling Machine Type FP 2 Year of Manufacture ca. 1975 _____ Table travel: longitudinal motor/manual 390 / 400 mm vertical motor/manual 390 / 400 mm cross motor/manual 190 / 200 mm Fixed angle table 250 x 700 mm Installation height under spindle 400 mm Spindle overhang (quill travel) approx. 165–465 mm Spindle taper SK 40 18 spindle speeds 40–2,000 rpm Infinitely variable feed rate 5–400 mm/min Rapid traverse 1,200 mm/min Spindle drive 2.2 kW Total drive power 2.5 kW - 380 V - 50 Hz Weight 1,000 kg Accessories / Special Equipment • DECKEL universal swivelling angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with separate drive • Large original DECKEL tool cabinet for storing the above accessories and various arbors, approx. 30 assorted collets, various milling tools, several arbors, etc., as well as operating tools, separate control cabinet, coolant system Condition : very good – demonstration-ready, ideal for training workshops/education Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice Csdpfx Aexzk Irofqork Constantly available: further DECKEL FP 1 / FP 2 / FP 4 milling machines and, of course, additional accessories such as spiral milling attachments also in stock

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1996, Universal Tool Milling Machine KUNZMANN WF 4/3 With 3-axis Heidenhain digital readout Year of manufacture: 1996 Travel distances: X 400 mm, Y 320 mm, Z 400 mm Speed range: 40 – 2550 rpm Including the following accessories: Rigid angle table, 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axis Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine lamp 4 machine feet Coolant system Operating manual THE MACHINE WAS USED EXCLUSIVELY FOR APPRENTICE TRAINING!! Csdpfx Afeq Ulucoqerk THE MACHINE IS IN GOOD CONDITION!!

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Control: SIEMENS 840D Solution Line (Electrical overhaul 2017) x-travel: 7,000 mm y-travel: 2,100 mm z-travel: 1,500 mm z-travel (spindle in vertical position): 1,200 mm Feed rate X, Y, and Z axes: 2 – 12,000 mm/min Rapid traverse X, Y, and Z axes: 12,000 mm/min Universal Milling Head UFK Spindle speeds: 22 – 2,400 rpm Drive power 100% / 60% duty cycle: 31.5 / 39 kW Max. torque main spindle: 2,200 Nm Swivel range milling head (C-axis): 180° Swivel range milling head (A-axis): 340° Automatic Indexing Chuck PREISLER AWU 650 Year of manufacture: 1995 with vertical three-jaw chuck FORKARDT F630: 630 mm Crjdpfxjx Dmrls Afqok Centre height above table: 500 mm Max. workpiece weight (cantilevered mounting): 2,000 kg Max. workpiece weight (with tailstock support): 4,000 kg Counter support with hydraulic quill Quill taper: MK6 Tailstock centre height: 500 mm Clamping plate Dimensions (LxWxH): 6,000 x 1,500 x 300 mm Max. load: 90 t T-slots: 6 pieces 28H7 (DIN650) T-slot spacing: 250 mm Coolant system with paper band filter Brand: ALLWEILER AG Type: PF 60 DVS / 500 Pump capacity at max. 3 bar: 40 l/min with return cooling unit Equipped with: Automatic indexing chuck with worm gear: PEISLER AWU650 Various roller stands and supports 6 machine clamping tables UK500 Hinged belt conveyor MAYFRAN Type: MT10 Electronic handwheel SIEMENS SINUMERIK HT2 Milling head version with hydromechanical quick-action tool clamping Direct, contactless measurement via linear measuring systems Oil circulation lubrication for main gearbox and milling head drive Operator platform traveling in X-direction, safety guard with inspection windows The machine is in exceptionally good condition and can be inspected under power. In 2017, a new SIEMENS 840D Solution Line control was installed; in this process, all drive motors and the control cabinet were renewed.

Stanje: novo, Model SBF 40 TV 1000 je natančni konvencionalni rezkalni stroj iz produktne skupine vrtalno-rezkalnih strojev podjetja KNUTH. Ta robustna naprava ponuja močno vrtanje in vsestranske možnosti rezkanja, zato je idealna izbira za podjetja, ki cenijo zmogljivost in prilagodljivost. Opremljena je z velikimi križno mizo z avtomatskim, brezstopenjsko nastavljivim podajanjem v osi X, kar omogoča učinkovito koordinatno vrtanje in lažje rezkalne operacije. Dolgotrajen menjalnik, ki deluje v oljni kopeli, zagotavlja zanesljivo delovanje. S svedrovim držalom in ročno preklopnim vrtalnim pomikom omogoča individualno prilagoditev med delovanjem. Integriran hladilni sistem podpira obdelavo jekla in neželeznih kovin. Če iščete zmogljiv in cenovno ugoden konvencionalni rezkalni stroj, ga lahko naročite neposredno prek spleta ali zahtevate ponudbo. Crsdpfouyibcjx Afqok

Stanje: rabljeno, Leto izdelave: 1977, Tehnične podrobnosti v prilogi. Vrtljiva miza 4500x4500 mm, pomik 4000 mm, največja nosilnost 100 ton. Talne plošče: 6 kosov, dimenzije 2000x4000 mm. Stroj je bil posodobljen z CNC Siemens 840D. Več slik in dodatnih informacij na zahtevo. Video delujočega stroja je na voljo na zahtevo. Cedpocfkn Uofx Afqork

Stanje: dober (rabljeno), KÖLSCH - Univerzalni rezkalni stroj -Univerzalni rezkalni stroj, primeren za delo po parcialnem ali celotnem krogu. Csdpfx Afexw H Dzoqsrk -Izdelava vzorcev lukenj z integrirano delilno mizo in koordinatno rezkalno mizo. Dimenzije: D x Š x V 1,7x1x1,9 m / Teža cca. 900 kg Pridržujemo si pravico do napak ali vnosnih napak.

Stanje: dober (rabljeno), Pozdravljeni, Naprodaj: univerzalni rezkalni stroj FY-321 Stroj je v dobrem stanju in v stalni uporabi, možno je preverjanje delovanja. Cena v oglasu je neto, na katero je potrebno prišteti DDV. Crodpfxjxykbie Afqsk Stroj si lahko ogledate v Starachowicah, ul. Kwiatkowskiego 13 Telefonski stik možen od 7:00 do 16:00.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1999, Univerzalni orodjarski rezkalni stroj TOS FNGJ 32 3-osni digitalni prikazovalnik Heidenhain Crodpfx Afsxc It Ijqsk Letnik: 1999 Pomiki: X 600 Y 400 Z 400 Območje obratov: 40 – 2000 min⁻¹ Z naslednjo opremo: Toga kotna miza, vpenjalna površina 800 x 400 mm Vertikalna rezkalna glava Izvlečna vrtalna pinola Različni vpenjalni členi SK 40 Zaščitna naprava Posoda za ostružke Strojna svetilka Avtomatska centralna mazalna črpalka za osi X, Y, Z Naprava za hlajenje 4 kosi strojevih nog

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, Dear Sir or Madam, We are pleased to offer a Deckel FP1 3-axis milling machine, equipped with retrofitted safety features. These newer models come with central lubrication, an electric coolant pump, and a brake motor as standard. Additionally, thanks to the Harting connector, the control cabinet can be disconnected from the machine in no time. The connection of all safety components to the control cabinet is also implemented with this connector type, ensuring that handling remains user-friendly. We provide a 12-month warranty on all retrofitted safety devices, which we can supply for any machine model! Cedpfxsuw Uu Ne Afqork The electronic spindle guard is adjustable across multiple axes and is designed to prevent access to the working spindle while also protecting against hazards such as flying chips, coolant, etc. The electronic spindle safety cap is intended to prevent interference with the rotating spindle stub, including the tool clamping area. Delivery time: on request Year of manufacture: 1989-1992 Machine no. 2102-xxxx Table: fixed angle table Travels: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1,200 mm/min Features and accessories: coolant device, central lubrication, manual, machine feet, electronic spindle guard, electronic spindle safety cap Our service promise to you: - We are a certified master engineering company - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we will completely or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories, such as additional safety equipment - We are happy to handle shipping and/or installation for you

Stanje: novo, WMD45 - ROGI Drilling and Milling Machine Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Worktable dimensions ----- 800 x 240 mm T-slot size ----- 14 mm Spindle taper ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle travel ----- 120 mm Head tiltable ----- Left / Right 90 Degrees Table longitudinal travel ----- 560 mm Table cross travel ----- 230 mm Speed range ----- 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3Ph INCLUDES * Drill chuck with shank ISO30 - B16 * Forward/Reverse switch * Spindle guard * Fine adjustment * 2-speed motor * Drift key * Tapping function * Digital depth stop * CE plug OPTIONS * Base cabinet * Milling vice * ISO30 tool holder + 12 collets in case * Milling cutter set Crjdega T Anspfx Afqek

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, x travel 450 mm Cjdjxdnpljpfx Afqjrk y travel 200 mm z travel 465 mm Total power requirement 2.6 kW Machine weight approx. 1.2 t O F F E R We can offer you the following, subject to prior sale and errors excepted, from stock on a non-binding basis: KUNZMANN Universal Milling Machine with HEIDENHAIN 3-axis Digital Readout Type UF6N Year of manufacture: 1983 Serial no.: 18625 _____ Table travel: longitudinal motorized / manual 450 / 440 mm vertical manual 400 mm Cross travel of milling slide manual 200 mm Fixed angle table 860 x 240 mm Height under spindle 50 - 700 mm Spindle taper SK 30 / MT4 18 spindle speeds 30 – 1,275 rpm Feed stepless 12 stages 13 – 328 mm/min Rapid traverse 1,000 mm/min Spindle drive 2.6 kW Total drive 2.6 kW - 380 V - 50 Hz Space requirement 1.40 x 1.90 x 1.70 m Weight 1,200 kg Accessories / Special equipment • Heidenhain 3-axis digital readout with extended features, absolute measurement, mm/inch switching, etc. • Movable universal vertical milling head, swivels +/- 45° • Large, fixed table, 860 x 240 mm, mounted • Coolant system, chip tray, central lubrication, operation manuals • Integrated work light Condition: Very well maintained! Ideal machine for (training) workshop or small batch production!! Please click here for a video of the machine: UF6N/4 Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice We always have a wide selection of conventional and CNC milling machines in stock. Please contact us!

Stanje: rabljeno, Leto izdelave: 2001, x-pomik 400 mm y-pomik 320 mm z-pomik 450 mm Krmilnik Heidenhain TNC 124 Glavna moč vretena 3 kW Število vrtljajev vretena 63-3150 min⁻¹ Csdpfoxndahox Afqsrk Vpenjalo za orodje SK 40 Navpični hod pinole 60 mm Hitrost podajanja 5-2000 mm/min Hitri pomik 2 m/min Delovna miza: 800x320 mm Hladilni sistem 20 l/min Skupna moč 5 kW Teža stroja pribl. 1,7 t Potrebni prostor pribl. 2,2x2,4x1,6 m

Stanje: dober (rabljeno), Pozdravljeni, Naprodaj je koordinatni vrtalni stroj Univerzalni rezkalni stroj TIP 6T83-1 Stroj je v delujočem stanju, v neprekinjeni uporabi, možnost pregleda. Cena v oglasu je neto cena, na katero je treba prišteti DDV. Stroj si lahko ogledate v Starachowicah na ulici Kwiatkowskiego 13. Telefonski stik od 7:00 do 16:00. Crodpfx Afoxyi Steqsk

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Univerzalni orodjarski rezkalni stroj DECKEL FP 3 S troosnim aktivnim digitalnim prikazovalnikom Heidenhain TNC 11 Leto izdelave: 1984 Pomik: X 500 Y 300 Z 400 mm Območje obratov: 25 – 2500 min⁻¹ Z naslednjo opremo: Toga kotna miza 850 mm x 400 mm vpenjalna površina Zasukalna vrtljiva miza Ø 450 mm z delilnimi ploščami Stružna glava Premična navpična rezkalna glava Izvlečna vrtalna puša Brezstopenjski podajalnik preko potenciometra Različni rezkalni trni SK 40 / S22 x 2 Kad za ostružke Centralna mazalna črpalka (avtomatska) za osi X, Y, Z Codpfxoxuh Rds Afqjrk Strojna luč Hladilna naprava 4 kosi strojnih nog Navodila za uporabo

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Sir or Madam, Crodpfxspy Elde Afqjk For sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly notable for its ease of operation. This newer model from 1989 features, among other things, central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. As part of the partial overhaul, the following work was carried out, among others: - Spindle bearings in the milling head replaced - Repainted - Various standard parts such as handles, oil sight glasses, switches, etc. replaced - Worn parts such as drive belts replaced - Way covers partially replaced - Gib strips adjusted - And much more... Delivery time: immediate Year of manufacture: 1989 Machine No.: 2102-xxxx Table: rigid angle table Travel: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1,200 mm/min Features & accessories: coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and worn parts, if necessary, are replaced in advance - Upon request, we can completely or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange shipping and/or installation

Stanje: novo, WMD25LV - 230V / 1Ph Drilling capacity in steel: 25 mm Codoga T Eiopfx Afqjrk Milling capacity in steel: 20 mm Face milling: 63 mm Motor: brushless 750W Spindle speed, stepless: 50 - 3000 rpm Spindle travel: 50 mm Spindle taper: MT3 Worktable: 700 x 180 mm Cross travel: 150 mm Longitudinal travel: 490 mm T-slots: 3 x 12 mm Throat: 170 mm Distance spindle - table: 325 mm Weight: 160 KG STANDARD ACCESSORIES * Drill chuck incl. key * Digital depth stop * Digital spindle readout * Fine adjustment * Left / right switching * Milling head rotatable left / right 90 degrees * Toolbox with various tools OPTION * Stand cabinet € 249.00 excl. VAT

Stanje: rabljeno, Leto izdelave: 1982, številka stroja/vozila: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Year of manufacture: 1982, 2 gearbox stages 1400/2800 rpm, Cedpfx Afjiqkc Ioqerk Table size: 860x240 mm, 3 T-slots 14 mm, spindle taper SK30, Travel distances: X/Y/Z = 450/200/430 mm, spindle speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 overarm arbor supports, 1 collet chuck with key, 1 machine vice with crank handle.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 4.000 mm, dolžina pomika po osi Y: 1.000 mm, dolžina podajanja os Z: 1.500 mm, hitrost pomika os X: 15.000 m/min, hitrost podajanja osi Y: 15.000 m/min, hitrost podajanja os Z: 15.000 m/min, največja hitrost vretena: 3.000 obr/min, dolžina mize: 4.000 mm, širina mize: 1.000 mm, CNC ECS 2301 (with possible retrofit option) SPINDLE ISO 50 DIN 2080 taper AC motor, 28 kW (S1/100%) Constant torque from 0 to 250 rpm Constant power from 250 to 3,000 rpm Two automatic speed ranges TABLE (X-axis) Length: 4,000 mm Width: 1,000 mm Csdpfx Ajw Axmnefqork Travel: 4,000 mm Number of T-slots: 7 T-slot width: 18 mm Feed rate (work): 0 – 8,000 mm/min Rapid traverse: 15,000 mm/min HEADSTOCK (Y-axis RAM) Y-axis travel: 1,000 mm Feed rate (work): 0 – 8,000 mm/min Rapid traverse: 15,000 mm/min VERTICAL CARRIAGE (Z-axis) Z-axis travel: 1,500 mm Feed rate (work): 0 – 8,000 mm/min Rapid traverse: 15,000 mm/min COLUMN (W-axis) W-axis travel: 1,300 mm Feed rate (work): 0 – 8,000 mm/min Rapid traverse: 15,000 mm/min ACCESSORIES: 40-position tool magazine

Stanje: novo, Leto izdelave: 2025, Completely overhauled, as-new condition machine, upgraded to the legally mandated safety standard “State of the Art” in accordance with the Occupational Health and Safety Regulation of the Professional Associations. Control Cabinet Electronics: Installation of a new CE-compliant control cabinet in line with the latest statutory requirements of the trade associations: BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally, the complete machine can be delivered in CE configuration. A CE Declaration of Conformity is issued for this machine, making FPS Werkzeugmaschinen GmbH the manufacturer of record. This means the machine fully complies with the requirements of the German Ordinance on Industrial Safety and Health (BetrSichV). The year of manufacture is aligned with the machine’s delivery date. Codoh R S Tcopfx Afqerk Certified to: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1. Control: 3-axis FPS Aktiv digital position display Spindle speed: 50 – 2,500 rpm, geometrically graduated direct-drive gearbox with 18 speed steps for maximum torque and milling performance Feed: 6.3 to 630 mm/min, infinitely variable Rapid traverse: 1.3 m/min Quill: Extendable vertical quill, 60 mm SK40 with M16 drawbar thread (optional: with DECKEL saw thread S20 x 2) Extendable horizontal quill approx. 100 mm Axes travel: X/Y/Z 500/400/400 mm Table: Fixed angle table 800 x 460 mm Equipment: • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Options: • Z-axis bellows • Chip tray • Machine lamp • Centralized lubrication • Universal table • Rotary table • Shaping head • Dividing head • Steady rest • etc.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 2.900 obr/min, hitrost vretena (min.): 100 obr/min, skupna višina: 1.700 mm, skupna dolžina: 1.000 mm, skupna širina: 750 mm, največja hitrost vrtenja: 2.900 obr/min, vrtljajska hitrost (min.): 100 obr/min, nosilec vretena: MK 3, vrsta vhodnega toka: trifazni, skupna masa: 260 kg, dolžina mize: 560 mm, širina mize: 250 mm, 3-fazni motor 380V, 2 hitrosti, deluje brezhibno! Hitrost vretena nastavljiva od 100 do 2900 obr/min. Crodpfx Asxnvrvjfqok Glava z zobniškimi prenosi. Globina vrtanja 115 mm. Vreteno MT3. Glava nastavljiva po višini in pod kotom. Črpalka za hladilno tekočino v podstavku. Križna miza v dobrem stanju. Dimenzije mize: 560x250 mm Izdelano na Švedskem! Skupne dimenzije: 100x75x170 cm Z vključeno vso dodatno opremo, kot je prikazano na slikah. Kontaktirajte nas za možnosti dostave! € 2.800,00 brez DDV!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Manufacturer: Emerson Macchine Torino Model: Carrera 700 Year of manufacture: 2021 Specifications: Table size: 1,320 x 320 mm • X - Y travel: 1,000 x 290 mm • Z-axis table travel: 400 mm • Spindle-to-table distance: 140 - 540 mm • Spindle-to-column distance: 200 - 550 mm • Spindle stroke: 120 mm • Spindle taper: ISO 40 • Drilling capacity: 30 mm • Tapping capacity: M16 Cjdow Ew Dwspfx Afqerk • Vertical spindle speed: 90 - 2,000 rpm • Horizontal spindle speed: 40 - 1,350 rpm • Horizontal/vertical motor power: 2.2/1.5 kW • Dimensions: 1,920 x 1,850 x 2,200 mm • Weight: 1,900 kg Standard equipment: • Automatic tool screwdriver • Gearbox • Horizontal spindle • Automatic feeds on all axes • Automatic spindle drop • Coolant system • Lamp Main features: • Three-axis digital readout (Z with head movement) • Thread cutting device (reverse mechanism) • Table guard Accessories: Documentation Tools Please submit enquiries only by email. All information provided to the best of our knowledge. Subject to errors. This offer is aimed exclusively at business customers as defined by § 14 BGB (German Civil Code). The sale takes place with the exclusion of any warranty. This exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller, or for injury to life, body or health. For further information, please visit the Witzenmann GmbH website under the sections "Impressum", "AGB" and "Datenschutz".

Stanje: novo, WMD20LV - 230V / 1Ph Drilling capacity in steel ----- 20 mm Milling capacity in steel ----- 20 mm Csdpfx Afeh S E Sbsqork Shell mill diameter ----- 63 mm Motor ----- brushless 750W Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle taper ----- MT2 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal travel ----- 490 mm T-slots ----- 3x12 mm Throat depth ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 150 KG STANDARD ACCESSORIES * Drill chuck incl. arbor * Digital depth stop * Digital spindle display * Fine adjustment * Left / right rotation * Milling head tilts left / right 90 degrees * Toolbox with various tools OPTION * Stand / base cabinet € 249.00 excl. VAT

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 2103 XXXXXX, The FPS 300M, successor to the DECKEL FP1. Based on our many years of service experience, we decided to develop and manufacture our own milling machines. The FPS 300M is a conventional milling machine, perfectly suited for both training and production. Control 3 axes – FPS Aktiv – digital display Spindle speed 40 – 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque and milling performance Feed 5 to 500 mm/min, continuously adjustable Rapid traverse 1.5 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angle table 600 x 210 mm Equipment Codpfxsh I Nqwj Afqjrk • Vertical and horizontal spindle • Milling head manually tiltable +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc. Further technical data can be found in the attached data sheet.

Stanje: novo, WMD30LV - 230V / 1Ph Drilling capacity in steel ----- 32 mm Milling capacity in steel ----- 20 mm Face milling ----- 76 mm Motor ----- brushless 1.5 kW Spindle speed stepless ----- 50 - 3000 rpm Quill stroke ----- 70 mm Spindle taper ----- ISO 30 Worktable ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal travel ----- 565 mm T-slots ----- 3x14 mm Throat distance ----- 240 mm Distance spindle to table ----- 470 mm Weight ----- 230 kg STANDARD ACCESSORIES * Drill chuck incl. arbor * Digital depth stop * Digital spindle speed display * Fine adjustment * Left/right rotation * Milling head swivels 90 degrees left/right * Toolbox OPTIONS Crsdjga T Agjpfx Afqjk * 3-axis digital readout * Base cabinet * Power feed (longitudinal) * Milling vice * ISO30 collet holder & 12 collets in case * Milling cutter set

Stanje: novo, Leto izdelave: 2025, With our many years of service experience, we have decided to develop and manufacture our own milling machines. The FPS 500M is a conventional milling machine, ideal for both training and production environments. The Heidenhain Positip 8016 Aktiv digital display enables precise positioning operations, such as creating and machining bolt circles. Control system: Heidenhain Positip 8016 Aktiv digital readout Crsdpfxjh Su Ipo Afqsk Spindle speed: 0 - 3000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque and milling performance Feed rate: 0 to 500 mm/min, infinitely variable Rapid traverse: 1.5 m/min Quill: Vertically extendable quill, 80 mm travel, SK40 taper Optional: horizontal working spindle or horizontally extendable quill (approx. 100 mm travel) Drawbar system: Hydraulic drawbar system - DIN 69872 Optional: DIN 2080 Axes: X/Y/Z 500/400/400 mm Table: Rigid angle table, 800 x 480 mm Features: • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Integrated chip pan • Machine lamp • Centralized lubrication • Z-axis telescopic way cover Options: • Universal table • Rotary table • Slotting head • Dividing attachment • Steady rest • etc. Further technical details can be found in the attached data sheet.