Univerzalna enota za rezkanje in vrtanje

DECKEL FP 2

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, A Deckel FP2 universal tool milling machine, completely overhauled in 2019, is available. Travel range X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Lrjdpovf Iy Defx Abbsg

Stanje: novo, Hidravlični upogibalec cevi 1/2 (1/2"–2") iz kategorije upogibalk cevi znamke KNUTH je zmogljiva in kompaktna rešitev za obdelavo cevi in profilov. Ta mobilni upogibalec cevi je opremljen z ročno hidravlično črpalko in je odličen za upogibanje jeklenih cevi večjih premerov. Z maksimalno tlačno zmogljivostjo 10 t omogoča upogibanje do 90° z uporabo matric, ki pokrivajo standardne dimenzije cevi. Priloženo trinožno stojalo zagotavlja stabilnost in udobje med upogibanjem. Zaradi kompaktne zasnove je idealen za uporabo na različnih lokacijah. Lahko zaupate, da bo ta robusten upogibalec cevi izpolnil vaše zahteve. Za dodatne informacije ali naročilo oddajte povpraševanje preko spleta. Odkrijte prednosti upogibalk cevi in si že danes zagotovite ta učinkovit upogibalec znamke KNUTH. Ljdpfx Abeuzlh Ijbsrg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, with 3-axis Heidenhain ND 780 digital readout, as new condition!! Technical Data: >> Machine No.: 2202-7020, FPS No.: 3364, year: 2013 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Features: >> 3-axis Heidenhain ND 780 digital readout >> Brake motor with immediate spindle stop >> Centralized lubrication >> 2x emergency stop >> Operating manual >> Coolant system Ljdpfx Abevbifgoberg About the Machine: For sale is a universal milling machine Deckel FP2, repowered by FPS, in as-new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine features an electrical centralized lubrication system and two emergency stop switches for added safety. As of 2013, both mechanically and electrically tested. The Heidenhain digital readout simplifies work and ensures even greater precision. Take the opportunity to inspect and test the Deckel under power on site. The machine is available immediately.

Stanje: rabljeno, skupna višina: 16.000 mm, skupna širina: 1.100 mm, skupna dolžina: 1.500 mm, Net weight: 1,000 kg Milling machine Model: Conventional Manufacturer: Deckel Type: FP2 Travel (X/Y/Z): 400x270x400 mm Speed range: 40–2,000 rpm Table size: 700x330 mm Spindle taper: ISO40 Lrsdpfox S Eayjx Abbeg Spindle motor power: 2.2 kW Overall dimensions (LxWxH): 1,500 x 1,100 x 1,600 mm Machine weight: 1,000 kg - Documentation available: No - CE certificate available: No - Control: Conventional - Power [kW]: 2.2 - X-axis travel [mm]: 400 - Y-axis travel [mm]: 270 - Z-axis travel [mm]: 400 - Table length [mm]: 700 - Table width [mm]: 330 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2,000 - Deal type: on request - Transport dimensions (L x W x H): 1,500 x 1,100 x 1,600 mm - Transport weight [kg]: 1,000 kg - Number of transport packages: 1 Financial Information VAT: Price quoted is net, plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial sector items Lukas van Rossum

Stanje: rabljeno, Leto izdelave: 1989, Universal tool milling machine Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop tested Machine no.: 2102-5561 Milling head type: 2171 Lroder En Dyjpfx Abbeg Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating manual Used, sold as seen, without warranty The technical condition of the machine corresponds to the standard of its year of manufacture.

Stanje: rabljeno, x-hod 400 mm y-hod 200 mm z-hod 400 mm Število vrtljajev vretena 18 Vrtljaji 40 - 2000 min⁻¹ Pritrdilna površina mize 730 x 240 mm Lodexqrdtopfx Abberg Vpenjalo SK 40 Razmak med utori 4 / 12 mm Število podajal 18 Območje podajal 8 - 400 mm/min Hitri pomik 1200 mm/min Skupna priključna moč 2,2 kW Teža stroja cca 1400 kg Potrebni prostor cca 1700 x 1400 x 1700 mm - robusten/močan univerzalni rezkalni stroj - Digitalni prikaz NEWALL - Hladilni sistem

Stanje: rabljeno, Leto izdelave: 1989, Technical details: X-axis travel: 300 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Control system: Contour 3 path control Spindle taper ISO: SK 40 Spindle head swivels left and right: 90° Quill travel: 60 mm Speed range: 40 - 4000 rpm / 21 steps Feed rate: 2 - 3600 mm/min Ledpfxsu Nc Tws Abbjrg Rapid traverse speed: 4000 mm/min Table size: 620 x 390 mm Clamping table: angle table (mm) Table load capacity: 0.45 t Total power requirement: 12.5 kVA Machine weight approx.: 1400 kg Machine dimensions approx. (LxWxH): 1.5 x 2.1 x 2.0 m Control cabinet dimensions: 1.8 x 0.8 x 1.1 m Equipment: - Operation via Grundig electronic operator panel with pendant arm - Coolant system with pump - Handheld control unit with handwheel - Machine lighting The machine can be demonstrated under power. i.D.

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: Ljdjd Nb A Nopfx Abberg The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 300 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 3.150 obr/min, hitrost vretena (min.): 31 obr/min, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 6.300 obr/min, vrtljajska hitrost (min.): 31 obr/min, trajanje garancije: 3 meseci, Oprema: dokumentacija / priročnik, Ponujamo obnovljeni stroj DECKEL FP 2NC z upravljanjem TNC 320, letnik 1982, orodna rezkalna naprava. Proizvajalec: DECKEL Model: FP 2NC s TNC 320 Leto izdelave: 1982 Stanje: Generalno obnovljeno Lrsdpfsx Sv Rcsx Abbog Krmiljenje: TNC 320 Tip stroja: Orodna rezkalka Če imate vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1968, potovalna razdalja osi X: 800 mm, pomik osi Y: 200 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, hod vretena: 80 mm, skupna dolžina: 1.000 mm, širina mize: 520 mm, dolžina mize: 1.000 mm, obremenitev mize: 2.000 kg, skupna masa: 2.500 kg, vhodna napetost: 400 V, teža obdelovanca (maks.): 2.000 kg, Ponujamo obnovljen rezkalni stroj DECKEL FP2LB, letnik 1968. Proizvajalec: DECKEL Model: FP2LB Letnik: 1968 Stanje: obnovljen Tip stroja: rezkalni stroj Če imate vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite. Lrodpfox Sdxzsx Abbog

Stanje: rabljeno, Premer kolesa: 500 mm Lsdpfjwl D S Usx Abborg Lokacija skladišča: Nattheim

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Universal milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control system: Deckel Dialog Control 4: - 3D path control, including drilling and milling cycles - Monitor, electric hand-held control panel - Terminal for program input and output Technical data: Travel range X/Y/Z: 300 x 220 x 400 mm Speed: 31.5 – 3,150 rpm with 21 gear steps Feed rate: 4–2,000 mm/min Rapid traverse: 4 m/min Lsdpfswid Spex Abbsrg Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital readout: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg - C-axis rotation: 360° - A-axis tilt: 15°/45° - B-axis swivel: +/- 45° Vertical milling head: - Quill travel by hand – horizontal 65 mm, vertical 60 mm Additional equipment: - Manual machine handwheels with scale - Direct travel measurement of NC axes - Coolant system Special accessories: - Approx. 33 tool holders (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space incl. ancillary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power connection: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected under power and cutting operation by appointment.

Stanje: dober (rabljeno), Leto izdelave: 1976, Deckel FP3, orodna rezkalna naprava s 3-osnim digitalnim prikazovalnikom Heidenhain. Stroj je v dobrem stanju. Fiksna miza, vpenjalni stožec SK 40. Oprema: različne napenjalne puše in nosilci rezkalnikov, nasprotni nosilec. V dobrem, takoj pripravenem obratovalnem stanju. Po dogovoru je možen prikaz pod napetostjo. Lrjdpfoxbx R Ujx Abbeg

Stanje: novo, Leto izdelave: 2025, With our many years of service experience, we have decided to develop and manufacture our own milling machines. The FPS 500M is a conventional milling machine, ideal for both training and production environments. The Heidenhain Positip 8016 Aktiv digital display enables precise positioning operations, such as creating and machining bolt circles. Control system: Heidenhain Positip 8016 Aktiv digital readout Spindle speed: 0 - 3000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque and milling performance Feed rate: 0 to 500 mm/min, infinitely variable Rapid traverse: 1.5 m/min Quill: Vertically extendable quill, 80 mm travel, SK40 taper Optional: horizontal working spindle or horizontally extendable quill (approx. 100 mm travel) Drawbar system: Hydraulic drawbar system - DIN 69872 Optional: DIN 2080 Axes: X/Y/Z 500/400/400 mm Table: Rigid angle table, 800 x 480 mm Features: • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Integrated chip pan • Machine lamp • Centralized lubrication • Z-axis telescopic way cover Options: • Universal table • Rotary table • Slotting head Lodpfxsh Su Ips Abborg • Dividing attachment • Steady rest • etc. Further technical details can be found in the attached data sheet.

Stanje: rabljeno, Leto izdelave: 1989, x-hod 300 mm y-hod 300 mm z-hod 400 mm CNC krmiljenje DIALOG 11 Vpenjanje vretena ISO 40 Hitrosti vretena 31 - 5.000 min⁻¹ Velikost mize 620 x 390 mm Obremenitev mize 250 kg Pogonska moč 5,5 kW Brezstopenjski podajalniki 2 - 6.000 mm/min Hod pinole 80 mm Obratovalna napetost 380 V Skupna potrebna moč 11,0 kVA Lodpfjx Ndbqox Abberg Teža stroja pribl. 1,65 t Prostorske zahteve pribl. 1,85 x 1,90 x 1,80 m Električna omara 1,35 x 0,70 x 1,70 m - Tovarniška št.: 2836-0283 - Krmiljenje: DIALOG 11 - Električno ročno kolo - Horizontalno rezkalno vreteno - Naprava za hlajenje