Rezkalni stroj

DECKEL FP 1 Aktiv (2-Achsen-Aktiv)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: Ihodpfx Afspy Eldo Tot - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Stanje: novo, Load capacity: 500 kg Outreach: 4000 mm Height: 3425 mm (underside of jib) Total column height: 4215 mm Slewing range: 270 degrees Total weight: approx. 550 kg Description: - Power supply to the trolley - Festoon cable system, cable sag approx. 800 mm - Floor operation via pendant control Including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-fall - Painted in RAL 5017 traffic blue - Load capacity: 500 kg - Hook travel: 3000 mm - Maximum hook position: 2965 mm - Calculated according to FEM 9.901 - Mechanism group 2m / M5 - Lifting, 2-speed (pole-changing), 1 / 4 m/min Ihjdpfx Asxak H Esf Tjt - Lifting motor power: 0.09 / 0.35 kW - Duty cycle: 60% ED - Switching cycles: 360 c/h Overload protection The crane system meets the requirements of the Machinery Directive 2006/42/EC and the currently applicable accident prevention regulations DGUV Regulation 52 (formerly BGV D6). Including: - Anchor rod set L200 (type LS 200) - Consists of 8 pcs. M27 mm x 800 mm with 1 steel template (500/8) - For foundation fixing, including grouting accessories To align the slewing crane, an installation gap between the column base and the building floor must be provided. The installation gap is to be grouted by the customer after approx. 4 weeks of crane operation. Image shows a similar crane system.

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 3.868 h, velikost sprednje pnevmatike: 540/65R24, velikost zadnje pnevmatike: 600/65R38, AUTOPOWR / IVT - 40 KM/H / AUTOTRAC READY / GEN 4 COMMANDCENTER / AUTOTRAC / JDLINK CAPABLE / PREMIUM SEAT / HYDRAULIC PUMP - 114 L/MIN / 3 ELECTRONIC SCV 450 SERIES CONTROL VALVES / MFWD FA- TLS WITHOUT BRAKES / 2-POSITION STEEL FRONT RIMS / FRONT Iodpfx Afsulaxho Tjht

Stanje: novo, Precizni vodilni in vlečni vretenasti stružnica Proizvajalec: OPTIMUM Model: OPTiturn TZ 4V Art. št.: 3432245 Stanje: Nov stroj Ihedpfx Afeg Hkmrs Tet Višina konice: 200 mm Razdalja med konicama: 800 mm Obratov: 50 - 3.000 min⁻¹ brezstopenjsko nastavljivo prek 2 stopenj menjalnika s SIEMENS inverter variabilnim pogonom Standardna oprema: - 3-osni digitalni prikazovalnik DPA 32 - digitalni prikazovalnik vrtljajev na vretenu - fiksni centrirni konus MK 3 - hitromenjalni nosilec orodja velikost B - nosilec stružnega noža BD - redukcijski tulec MK 6 / MK 3 - fiksna luneta ø 10 - 130 mm - gibljiva luneta ø 10 - 100 mm - hladilna naprava - izvlečna posoda za ostružke - LED strojna svetilka - servisno orodje

Stanje: dober (rabljeno), Leto izdelave: 2018, Miza 1473 x 305 mm, pomiki XYZ: 1000 x 410 x 400 mm (kolenski tip), hodi pinole 127 mm, stožec vretena ISO40, avtomatski izvlečni vijak, motor vretena 5 KM, hitrosti vretena 70 - 3600 vrt/min, CNC upravljanje Prototrak SMX, Ihedexftqdopfx Af Tst

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 400 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 1 obr/min, poteza s peresom: 60 mm, skupna višina: 2.100 mm, skupna širina: 2.100 mm, skupna dolžina: 2.300 mm, širina mize: 450 mm, dolžina mize: 750 mm, največja hitrost vrtenja: 4.500 obr/min, vrtljajska hitrost (min.): 1 obr/min, skupna masa: 1.900 kg, teža obdelovanca (maks.): 500 kg, Traverse paths X/Y/Z 400/350/300 mm, spindle speeds 1 - 4500 rpm, motor 4.5 kW, spindle taper SK 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping system, coolant system, splash guard, tool holders, electronic handwheel, operating manual Ihjdpfxewb Erzs Af Tot

Stanje: rabljeno, Leto izdelave: 1989, Universal tool milling machine Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) Ihodpfx Asr En Dyef Tjt - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating manual Used, sold as seen, without warranty The technical condition of the machine corresponds to the standard of its year of manufacture.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Isdpfou Dm E Hox Af Teht Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: rabljeno, Leto izdelave: 1988, Krmiljenje Grundig Ihjdpsiqu S Ejfx Af Tot x-hod 700 mm y-hod 500 mm z-hod 400 mm Teža stroja cca 2,8 t +++++ Upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka ni mogoča. Naš oglas vsebuje tudi najbolj informativne fotografije v najboljši možni kakovosti. Pošiljanje dodatnih fotografij žal ni mogoče. +++++

Stanje: rabljeno, Leto izdelave: 2003, Travel X: 930 mm Travel Y: 400 mm Travel Z: 406 mm Spindle speed: 9–6,750 rpm Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (X) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product Information: “Multifunction Milling Machine Optimill MF 4 Vario—Tool Milling Machine with Variable Speed” Optimill MF 4 Vario—multifunctional drilling-milling machines designed for professional applications. Electronically stepless drive control with frequency inverter “made in Germany” and digital 3-axis position display DPA 21. Heavy, robust design made of high-quality Meehanite cast iron. High concentricity accuracy with tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X- and Y-axes feature adjustable dovetail guideways. Coolant system. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse on Z-axis. Equipment details: - Frequency inverter quality made in the EU - Drilling-milling head, tiltable ±45°, overhang 200–680 mm, spindle speeds - Stepless speed control with extra-wide speed range - Adjustable drilling depth stop with millimeter scale, easily readable on front - Safety screen, height-adjustable and generously dimensioned - Cross table: massive, large, precisely surface-machined - Motorized table height adjustment on Z-axis - Adjustable limit stops - OPTI control panel: integrated control console - Integrated digital position display DPA 21 with speed display - X-axis : motorized table feed, stepless speed control, rapid feed, forward/reverse Technical Data: Product length: 1,500 mm Product width/depth: 1,450 mm Iedet U Rm Ispfx Af Tsht Product height: 2,200 mm Net weight: 1,150 kg Total power connection: 4 kW Electrical voltage: 400 V Phases: 3~ Network frequency: 50 Hz Max. face mill diameter: 100 mm Max. shank cutter diameter: 20 mm Vertical spindle reach: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 8 steps Vertical spindle speed control: electronically adjustable Horizontal table length: 1,370 mm Horizontal table width: 254 mm Vertical spindle to table min.: 40 mm Vertical spindle to table max.: 446 mm Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle motor power (normal mode): 3 kW Coolant pump motor power: 100 W Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity steel (S235JR): 32 mm Continuous drilling capacity steel (S235JR): 28 mm Vertical spindle drilling head swivel range Z-X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev