Univerzalni rezkalni stroj, univerzalna rezkalka

DECKEL FP 1

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Tehnični podatki X-pot: 300 mm y-pot: 160 mm z-pot: 290 mm Površina mize: 600 x 210 mm Nosilec orodja: SK 40 Hitrosti vretena: (16) 40 - 2000 o/min Vodilni pomik brezstopenjski: 5 - 500 mm/min Hitri pomik: 1,2 m/min Pogon vretena: 1,5 / 1,9 kW Skupna potrebna moč: 9,5 kVA Teža stroja pribl.: 830 kg Potreben prostor pribl.: 2000 x 2200 x 1655 mm Dodatne informacije Ljdpfx Aeyangqebberg Stroj je v zelo dobrem stanju in prihaja iz učne delavnice. Oprema: * 3-osni pozicijski krmilnik z aktivnim digitalnim prikazom Heidenhain TNC 123 - Ročno upravljanje: Ročni način in pozicioniranje z ročnim vnosom - Avtomatski način: Programirano izvajanje posameznih blokov, shranjevanje programov * Fiksna kotna miza * Premakljiv navpični rezkalni glavič, nagibni razpon +/- 90°, pomik pinole 60 mm * Naprava za hlajenje * Centralno mazanje * Protipodporna glava z ležajem * Nihajna stopala * Dokumentacija

Stanje: rabljeno, Leto izdelave: 1989, Universal tool milling machine Brand: DECKEL Lodsr En Dyspfx Abbsrg Model: FP 1 Aktiv Year of manufacture: 1989 – workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating manual Used, sold as seen, without warranty The technical condition of the machine corresponds to the standard of its year of manufacture.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rezkalni stroj Deckel FP1. Zelo dobro stanje. Popolnoma funkcionalen. Lredpfjxgdr Isx Abbjg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel distances: X 300 Y 160 Z 340 mm Spindle speed range: 40 – 2000 rpm Including the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 pc. machine vice 1 pc. steady with counter bearing 1 pc. long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z-axis bellows 1 pc. chip guard Lrodpfjw Agxrox Abbog Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Stanje: rabljeno, Leto izdelave: 2001, Sheet width: 3200 mm Sheet thickness: 3.0 mm steel Sheet thickness (stainless steel): 2.0 mm Opening width / Upper beam stroke: 300 mm Upper beam speed: 40.0 mm/sec Bending beam adjustment: 80.0 mm Working height: 900 mm Bending beam speed: 90.0 degrees/sec Control system: MULTIBEND 5000 Backgauge – adjustable: 10 - 1550 mm Accuracy: ± 0.1 mm Air pressure: 5.0 bar Operating hours: approx. 1,000 h Total power requirement: 2 x 4.0 kW Voltage: 400 V Weight: 4,400 kg Dimensions (L-W-H): 4295 x 2225 x 1775 mm New price: approx. €85,000 Machine with only approx. 1,000 operating hours (!!) Good condition (!!) Special price on request - Inspected condition - Machine video - ?v=VP6emx4HTYM ! Maximum flexibility in bending cassettes, boxes, and profiles ! High flexibility in part design ! High productivity and throughput ! Easy to operate Equipment: - Motorized universal folding machine "RAS 73.30" * High-precision mechanics with modern control technology * Designed for single and series production * Robust high-speed machine with fast axis speeds * Torsion-resistant welded construction - RAS CNC control model "MULTIBEND 5000" * Material and tool library * Swivel-mounted – front right * 1x emergency stop button - CNC electric upper beam adjustment Lrodpoxabz Tofx Abbjg * Fast closing and opening speed * Programmable opening and closing height * Bending radii without special tools (multiple bends) * Rigid upper beam for straight bending parts * 1x set RAS segmented upper tools – height 80 mm * RAS "Click-In" tool system (pneumatic) - CNC electric bending beam adjustment * Fast swiveling motion: short production times * Crowning system compensates deflection due to bending forces * 1x set RAS segmented bending tools - CNC electric backgauge * Fast positioning, repeatable accuracy * Support tables for sheet weight * Stainless steel support tables with ball rollers - 2x mobile double foot switches - 1x RAS tool cart for bending tools (mobile) - Operating manual (PDF) + original wiring diagram

Stanje: delavnici obnovljeno (rabljeno), dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 160 mm, dolžina podajanja os Z: 340 mm, Updated Machineseeker Description (with Axis Travel) Deckel FP1 Aktiv – 3 Axes – Partially Refurbished – Immediately Operational Offered is a Deckel FP1 Aktiv in technically inspected, partially refurbished condition. The machine has been professionally reconditioned and is in a dependable, ready-to-use state. Ideally suited for workshops, toolmaking, training environments, as well as prototype and small-batch production. This is not an unchecked used machine, but a technically overhauled toolroom milling machine with a clearly defined scope of delivery and reliable lead time. Technical Data and Features Travel distances: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Infinitely variable feed on all 3 axes Coolant system Brake motor Rigid angle table Lrjdpjx Tdy Isfx Abbsg New LED work lamp New leveling feet Technical documentation in PDF format Scope of Refurbishment Workshop-tested and partially refurbished Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all settings as required Replacement of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial refurbishment provides an optimal balance between operational safety, cost-efficiency, and availability. A full regrinding of the guideways was not carried out, as there was no technical necessity for it. Scope of Delivery Machine loaded free of charge Delivery time approx. 12 weeks

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Znamka: DECKEL Model: FP 1 Aktiv Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Lredpfxex S Edlo Abbog Geometrijski prevzem s preizkusnim protokolom Pribor: - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) - Vertikalna rezkalna glava SK 40 z vijačnim navojem S 20 x 2 - Brez hladilne naprave možnost naknadne vgradnje - Električna centralna mazalna naprava - Navodila za uporabo Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Leto izdelave: 2004, Stanje: dober (rabljeno), številka stroja/vozila: UP 20_LIND, Used Motoman HP20 Model: HP 20 Lrjdpjfd Drrofx Abbeg Controller: NX100 Year of manufacture: 2004.09 Payload: 20 kg

Leto izdelave: 1974, Stanje: skoraj kot novo (rabljeno), As-new Deckel FP1 universal milling machine, overhauled by FPS, featuring 3-axis Heidenhain digital readout, adjustable swivel table, and SK 40 spindle taper. Equipped with spindle brake. Accessories include tailstock and various collets. The machine is in excellent, ready-to-operate condition and can be demonstrated under power by arrangement. Ledpfxeq A Icqs Abborg

Stanje: dober (rabljeno), Three-phase motor, electric motor, brake motor Lsdpfjul H Dwsx Abborg - Manufacturer: Siemens, electric motor type 1LC3113-4BB23 Z from a Deckel FP4L milling machine - Power output: 4.0 kW - Speed: 1435 rpm - Mounting type: B14 - Protection rating: IP 44 - Brake: Disc brake type EK5dB24 - Dimensions: 575/270/H225 mm - Weight: 64 kg

Stanje: rabljeno, Leto izdelave: 2000, Premer struženja . mm Dolžina struženja . mm Ledpfxeqn A Rns Abborg Krmiljenje 2x 840 D Dodatna oprema: sistem za hlajenje Transporter ostružkov: da kW Nazivni tok generatorja 95,00 A Priključna moč 65,00 kW Na voljo so 3 stroji Nakladalni sistem: ? Inventarna številka: 21214 ? Oznaka stroja: Avtomatizacija Promot za 21223 ? Leto izdelave: 1999 x2 / 2000 x1 ? Krmiljenje: Siemens Sinumerik 840D Powerline ? Podatki o električni oskrbi: ? Obratovalna napetost: 10,00 kW ? Nazivni tok: 18,00 A ? Rezerva: 25,00 A 2x 1999 / 1x 2000

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 2-axis active digital display (Heidenhain) Spindle mounting: SK40 (S20x2) Travel distances: X 300 / Y 160 / Z 340 mm Spindle speed: 40 - 2000 rpm (2 gearbox stages) Feed infinitely variable adjustable Ledpfx Aevnr Hysbberg The machine is in well-maintained condition and can be inspected under power on site. Includes extensive accessories: - Machine vise - Operating manual / electrical circuit diagram / spare parts list - Collet set (S20x2) incl. SK40 collet chuck - Additional accessories available on request.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 3-axis active digital display (Heidenhain TNC113) Spindle taper: SK40 (S20x2) Travel: X 300 / Y 160 / Z 340 mm Spindle speed: 40 - 2000 rpm (2-speed gearbox) Feed rate steplessly adjustable The machine is in well-maintained condition and can be inspected under power on site. Including extensive accessories: - Machine vice Ledpfxovnrz Re Abberg - Operating manual / electrical schematic / spare parts list - Collet chuck set (S20x2) including SK40 collet chuck adapter - Additional accessories available upon request.

Leto izdelave: 2000, Stanje: dober (rabljeno), CNC Surface and Profile Grinding Machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Lrsdsfrbckjpfx Abbog Year of manufacture: 2000 Grinding area: 600 x 270 mm Electromagnetic chuck with continuous crosswise pole division Dimensions: 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine tray included. Complete machine documentation available.

Stanje: dober (rabljeno), 1 used universal tool milling machine Make: Deckel Model: FP 1 Year of manufacture: 1982 Technical specifications: X-axis travel: 300 mm Y-axis travel: 160 mm Z-axis travel: 340 mm Spindle taper: SK 40 Table size: 600 x 210 mm Spindle speeds: 40–2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6 x 1.3 x 1.8 m Lsdpfx Abern I Rzsberg