Orodni rezalnik

Deckel FP3 L Aktiv

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal Tool Milling Machine Make: DECKEL Itedpfx Afsh Rv U Es Teb Model: FP 3 L Aktiv Year of manufacture: unknown – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2302-2319 Milling head type: 2271 Milling head no.: 700-0883 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, electric - Coolant device - Operating manual - Drill bit grinding attachment with diamond wheel - used, as seen -

Stanje: dober (rabljeno), Leto izdelave: 1985, številka stroja/vozila: 1076-85, Offer 24303 Technical Data: - Table size approx. 630 x 340 mm - Working area of axes: - X (longitudinal) approx. 400 mm - Y (transverse) approx. 220 mm - Z (vertical) approx. 400 mm - Max. distance spindle – table surface: 400 mm - Tool holder: SK 40 - Spindle speeds adjustable in 16 steps: 45 – 2240 rpm - Feed rate X, Y, Z axes: 6.3 – 1250 mm/min - Drive: 400 V / 8.5 kW - Space required approx.: W 1450 x H 1900 x D 1450 mm - Weight approx.: 1600 kg - Equipped with: 3-axis digital readout HEIDENHAIN, swiveling vertical milling head, horizontal spindle counter-support, machine vice Itsdpfx Aot Dxwgef Teb

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes Itjdeu Dm E Hopfx Af Tsb • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Leto izdelave: 2001, Stanje: rabljeno,

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Itjdpju Aa I Sofx Af Tsb Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) Itedpfx Afjh Hvk Ao Teb - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, with 3-axis Heidenhain ND 780 digital readout, as new condition!! Ijdpfx Afevbifgs Tetb Technical Data: >> Machine No.: 2202-7020, FPS No.: 3364, year: 2013 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Features: >> 3-axis Heidenhain ND 780 digital readout >> Brake motor with immediate spindle stop >> Centralized lubrication >> 2x emergency stop >> Operating manual >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP2, repowered by FPS, in as-new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine features an electrical centralized lubrication system and two emergency stop switches for added safety. As of 2013, both mechanically and electrically tested. The Heidenhain digital readout simplifies work and ensures even greater precision. Take the opportunity to inspect and test the Deckel under power on site. The machine is available immediately.

Stanje: novo, Leto izdelave: 2025, Overhauled, as-new machine, modernized to meet the legally required safety standard “state of the art” according to operational safety regulations of the professional associations. Iodpfx Ash Sptnef Tjtb Control Cabinet Electronics Installation of a new CE-compliant control cabinet in accordance with the latest statutory regulations of the professional associations: BGVA 3 / DIN EN 60204-1 new machine standard. Optional: complete machine in CE execution. A CE declaration of conformity will be issued for the machine, making FPS Werkzeugmaschinen GmbH the legal manufacturer. This ensures the machine complies with the OPERATING SAFETY REGULATION (BetrSichV). The machine’s year of construction is considered to be the delivery date. Standards applied: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1. Control 3-axis FPS Aktiv digital display Speed 25 - 2500 rpm, geometrically stepped direct gearbox with 18 speed stages for maximum torque / milling performance Feed 5 to 500 mm/min, infinitely variable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 100 mm, SK40 with M16 drawbar thread optional: with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z: 800 / 300 / 400 mm Table Rigid angle table, 1000 x 440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1999, Univerzalni orodjarski rezkalni stroj TOS FNGJ 32 3-osni digitalni prikazovalnik Heidenhain Letnik: 1999 Pomiki: X 600 Y 400 Z 400 Območje obratov: 40 – 2000 min⁻¹ Z naslednjo opremo: Toga kotna miza, vpenjalna površina 800 x 400 mm Vertikalna rezkalna glava Izvlečna vrtalna pinola Iedpexc It Iefx Af Tetb Različni vpenjalni členi SK 40 Zaščitna naprava Posoda za ostružke Strojna svetilka Avtomatska centralna mazalna črpalka za osi X, Y, Z Naprava za hlajenje 4 kosi strojevih nog

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7/61, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 760 kg Customs tariff number: 8459.2930 External dimensions: approx. 1250x1000x1700 mm TECHNICAL DATA: WORKING AREA X and Y travel: 200x200 mm Vertical quill stroke: 250 mm Drill spindle travel: 70 mm Max. clearance between table and spindle nose: 330 mm Clearance between column and spindle center: 260 mm Max. drilling capacity (in steel): 10 mm Max. boring capacity: 50 mm TABLE Usable surface: 400x300 mm Load capacity: up to 100 kg X and Y movement: motorized Number of T-slots: 6 (longitudinal) DRILLING HEAD Drill spindle internal taper: Morse 0 Drill spindle speed, steplessly adjustable: 150-3000 rpm Drill spindle feed: 0.015 mm/rev Measurement system: direct, optical Measuring elements: graduated scales, division 1 mm Itjdsd Amgkspfx Af Teb Readout: screen Zero-point shift: yes Direct readout: 0.001 mm Guaranteed positioning accuracy: 0.002 mm Installed power: 1.2 kW All technical data subject to change or error. Inventory no. 2160006, Machine equipped with: 1 rotary table Ø 220 with optical measurement 1 centering microscope with three-point suspension, 40x magnification, illumination 1 centering device with dial gauge, capacity 3 mm, MK0 1 center point MK0 1 touch probe with spring-loaded tip MK0 1 center punch MK0 1 chuck for centering drills MK0 1 self-tightening drill chuck 0-5 mm, MK0 1 boring head type 0, capacity 0.5-30 mm, MK0 1 leveling foot with 2 round leveling supports