Univerzalni rezkalni stroj

DECKEL FP 4 Typ 2700

Stanje: dober (rabljeno), Clamping plate, scribing/marking plate, inspection plate, measuring table, welding table, aligning plate - Clamping plate is from a coordinate measuring machine - Width: 1335 mm - Length: 3000 mm - Height: 250 mm - Plate thickness: 40 mm - Plate features: with support ribs - With 4x leveling feet - Quantity: 1 piece available Hnsdpjfc T Tqjfx Abxsn - Transport dimensions: 3000 x 1335 x H750 mm - Weight: 2,749 kg

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws Hnedpfx Aeh Hvk Aobxon - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition

Leto izdelave: 1993, stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Hnodpocc D Ddsfx Abxen Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.060 mm, pomik osi Y: 610 mm, pomik po osi Z: 610 mm, model krmilnika: Ultimax, skupna višina: 2.800 mm, skupna dolžina: 2.200 mm, skupna širina: 2.400 mm, širina mize: 610 mm, dolžina mize: 1.270 mm, moč vretenovega motorja: 18.000 W, število vreten: 1, število mest v zalogovniku orodij: 24, Oprema: dokumentacija / priročnik, transportni trak za ostružke, 3 axes Tool holder SK 40 Internal cooling 35 kVA Hsdpfx Aswtdzrobxjnn approx. 7550 kg Comprehensive tool package available separately

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 2.500 obr/min, dolžina mize: 790 mm, širina mize: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Cross travel 400 mm Vertical travel 400 mm Hnedpewffymjfx Abxsn Spindle travel 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Hnodpfx Abev Scrhexen

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Hodpermkfnofx Abxonn Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: dober (rabljeno), Leto izdelave: 2006, Obdelovalni center Hurco VMX 30 s Kitagawa 4. osjo, IKZ, NC primež 125, različni nosilci orodij, dobro vzdrževano stanje Hsdpoxrcnlofx Abxsnn

Stanje: dober (rabljeno), Leto izdelave: 2008, dolžina podajanja os X: 400 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 400 mm, Heidenhain TNC 124 control Quill electronic handwheel coolant system Technical data: Longitudinal travel (X-axis): 400 mm Cross travel (Y-axis): 250 mm Vertical travel (Z-axis): 400 mm Table clamping area: 600 x 320 mm Hedpfxjrb A Tce Abxonn Spindle taper: SK40 Spindle speed range: 30–6300 rpm Feed rate x, y, z: 10, 10, 8 m/min Total drive capacity: 6.5 kW Weight approx.: 1200 kg Technical data, accessories, and description of the machine are non-binding.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 4.500 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 090119, Country of manufacture: CE – Germany Voltage: 400V Net weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h – Working hours: 4,500 h TECHNICAL DATA AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm Rotational range B-axis: 0.0001 – 360° Rotational range C1/C2-axis: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum weight: 5 kg TURRET HEAD Number of stations: 24 Number of driven stations: 18 Number of static stations: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16 x 16 mm (20 x 20) Maximum turret head path above tool tip: 500 mm Speed of rotating tools: 1–9,000 rpm SPINDLE Maximum speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR MACHINING Maximum bar length for bar feeder: 1,000 mm Maximum workpiece size for bar gripper: Ø 42 x 100 mm Maximum diameter for collet gripper: 42 mm Clamping cylinder pull/push force: 20,000 N FEED DRIVES Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse X/Y/Z axes: 20 m/min Tool control motor torque: 2.4 Nm Spindle S1 / Spindle S2: 70 Nm COOLING (Performance rate) Chip conveyor submersible pump output: approx. 10 l/min at 4.5 bar      80 l/min at 3.2 bar      150 l/min at 0.7 bar High-pressure pump (in conveyor): 10 l/min at 13.2 bar      50 l/min at 9 bar Hnedpsht Hg Djfx Abxon      90 l/min at 1 bar Lubrication volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROLLER: Siemens 840D WORKING PRECISION Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Repeatability: 0.6 µm Max. runout error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Feed motor X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulic return: 0.75 kW Cooling unit fan 1 / 2: 0.18 kW Cooling unit circulation pump: 1.1 kW Cooling unit compressor: 2.2 kW Chip conveyor: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Control voltage: 400 V Network frequency: 50Hz (60 optional) Control voltage: 24V DC Total power: 35 kW Nominal current: 63A Connection: TM / TT / IT grid PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Valve voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 according to Pneurop6611 NOISE EMISSION Normal operation: 78–80 dB Technical data subject to change; errors and omissions excepted Inventory No. 2321018; machine configuration: - Chip conveyor - Prepared for bar feeder installation Tool holders: - 6 fixed drill holders ER32 - 8 turning tool holders - 5 powered tool holders ER32 - 4 powered tool holders ER25 - 6 powered tool holders ER20