CNC center za struženje in rezkanje

Index R 200

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° COUNTER SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bar loader Hsdpev Ig Avofx Aqtot - Number of tools in magazine: 80 - Tool change time: 4.5 s ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h ACCESSORIES - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (ICS) - Chip conveyor - Spindle cooling - Parts removal

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, EMCO MAX TURN 45 vključno z LM 1200. Vključen transportni trak za odrezke. Več slik sledi. Hjdpfx Aqozhl Nwstst

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 346 h, število osi: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and a rapid traverse rate of 24 m/min on the X-axis. If you are looking for high-quality turning and milling capabilities, the Hurco CNC TMX 8 MYSi turning-milling center should be considered. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max. turning diameter: 508 mm • Max. turning length: 560 mm Hjdpeym T Itefx Aqtjt • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Max. main spindle speed: 4,500 rpm • Max. sub-spindle speed: 6,000 rpm • Synchronizing spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar pass-through: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Maximum motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interruption capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included; swiveling holders are not included.

Stanje: dober (rabljeno), Maximum bar capacity: 36 mm Maximum spindle speed: 6,300 rpm Number of spindles: 2 Control system: Traub TX8i Tool carrier 1: Number of tools: 12 X-axis travel: 50 mm Z-axis travel: 50 mm Front tool carrier: Number of tools: 7 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Rear tool carrier: Number of tools: 5 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Hedstrvzxopfx Aqtet Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, potovalna razdalja osi X: 750 mm, pomik osi Y: 750 mm, pomik po osi Z: 725 mm, CNC control Sinumerik 840D Hsdpjq Ui Hqefx Aqtjt NC rotary table B-axis Magazine for 320 tools Pallet changer device, 2 pallets 500mm x 500mm Internal coolant supply ICS (80 bar) Chip conveyor Coolant system Technical data: X-travel longitudinal: 750 mm Y-travel vertical: 750 mm Z-travel cross: 725 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 50–10,000 rpm Tool positions in changer: 320 Feed rate: 60,000 mm/min Rapid traverse: 60 m/min Spindle drive capacity 40/100% duty cycle: 37/24 kW Machine weight approx.: 15,000 kg Technical data, accessories and machine description are not binding.

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), SMG HZPU 8000-3000/2100-S1 Hidravlična vlečna stiskalnica Hsdpfen Awd Rjx Aqtet Znamka: SMG Tip: HZPU 8000-3000/2100-S1 Leto: 1995 Opis: Hidravlična vlečna stiskalnica s H-okvirjem Tlačna sila: 800 ton Vpenjalna površina: Pribl. 3.000 x 2.100 mm Vgradna višina: Maks. 1.400 mm

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Hsdpfxjlz Rvle Aqtet Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate): Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details.

Leto izdelave: 2020, obratovalne ure: 6.056 h, stanje: pripravljen za uporabo (rabljen), Krmilna enota Znamka: SIEMENS Model: 840D Splošni podatki Širina: 3.150 mm Globina: 5.564 mm Višina: 2.135 mm Teža stroja: 10.000 kg Glavni pogon Območje vrtljajev vretena: 3.600 vrt/min Premikanje Hitrost hitrega pomikanja X-osi: 30 m/min Hitrost hitrega pomikanja Y-osi: 22,5 m/min Hitrost hitrega pomikanja Z-osi: 33 m/min Obdelovanec Premer obdelovanca nad posteljo: 800 mm Hjdjx D Iv Espfx Aqtet Premer obdelovanca: 600 mm Orodja Število mest v magazinu: 12 Ta triosni horizontalni stružni stroj, izdelan leta 2020, je opremljen s krmiljenjem Siemens 840D in doseže hitrost vretena do 3.600 vrt/min. Omogoča največji stružni premer 600 mm in dolžino 2.000 mm. Opremljen je s transportnim trakom za odrezke, Siemens CELOS krmilnim sistemom in sistemom za odsesavanje hlapov, zato je idealen za zahtevne strojne operacije. Izkoristite priložnost za nakup tega horizontalnega stružnega stroja DMG MORI CTX 2000. Za več informacij nas kontaktirajte. Vrsta uporabe Struženje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, CNC stružnica z osjo C MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Proizvajalec: MAZAK Tip: QUICKTURN NEXUS 250-IIM Hedpfx Aqsyz Stlotst Krmiljenje: Mazatrol Matrix Nexus Letnik: 2008 Prosimo, upoštevajte: Informacije na tej strani so bile pridobljene po našem najboljšem znanju in, kjer je bilo mogoče, od proizvajalca. Podatki so posredovani v dobri veri, vendar točnost ni zagotovljena. Ne predstavljajo jamstva ali pogodbenih pogojev. Priporočamo, da preverite vse ključne informacije.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Commissioning: As Okuma stock machine 09.2017 Controller: OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Spindle bore Ø 112 mm Motor power 32kW Torque 955Nm ▪ Hollow clamping cylinder Ø 127mm SMW VNK 320-127 with bore Ø 127mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance, self-cleaning function ▪ Drum-type sump filter TMF300 with clean tank 980l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on lower turret (not possible in combination with driven tools for the lower turret) ▪ Door automation ▪ Robot interface Type E for connecting additional loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22kW / 700 Nm / 50-4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2 steps Range switching at full speed ▪ Lower turret: 12 stations With cylindrical roller guide in ZB-axis With slideway in XB-axis ▪ Collision Avoidance System (CAS) in real time ▪ 19" Color LCD TFT (1280x1024) with 3D color graphics as touch screen/panel with vertical monitor and tilt-adjustable keyboard ▪ Second operating system Windows 7 for operation and open, unrestricted use for Windows 7-compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° ▪ Y-axis with stroke +150 / -150 = 300mm ▪ B-axis 240° Positioning in 0.001° ▪ Tool spindle (Okuma motor spindle): 22kW / 120Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. 20bar pressure Hodjyviigjpfx Aqtot Including bag filter, external cooling for tool spindle, pump with max. 3bar pressure ▪ Tooling system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement device (when using standard chuck) for secure setup ▪ Machine management MacMan with integrated BDE (machine data collection) ▪ Part program storage 2 GB ▪ Max. length of individual part program 2 MB ▪ 2 USB 2.0 interfaces ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation by periodic speed variation ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection function) ▪ Coordinate transformation (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°