Rezkalni stroj - univerzalni

DECKEL FP3

Stanje: pripravljen za uporabo (rabljen), Orodjarska rezkalna stroj DECKEL FP 3 z digitalnim prikazom Heidenhain - Dobro ohranjen originalno stanje - Hodi X/Y/Z 500x300x400 mm - Pomiki / hitri pomiki na vseh 3 oseh - Orodno vreteno ISO 40 - Območje vrtljajev 40 - 2000 vrt./min - Vertikalna / horizontalna rezkalna naprava - Kotna miza - Naprava za hlajenje - Centralno mazanje - Posoda za odrezke Hjdpfx Adszcxtaorsfh - Dokumentacija Mere: D׊×V 1,7×1,2×1,8 metra / Teža 1350 kg Pridržujemo si pravico do napak ali napačnih vnosov

Stanje: rabljeno, Leto izdelave: 2012, številka stroja/vozila: MB0001-000031, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.200 mm, hitro pomikanje X-os: 12 m/min, hitri pomik os Y: 12 m/min, hitri pomik na osi Z: 12 m/min, dolžina pomika po osi Y: 6 mm, hitrost pomika os X: 6 m/min, hitrost podajanja osi Y: 6 m/min, hitrost podajanja os Z: 6 m/min, proizvajalec krmilnikov: FANUC, model krmilnika: 32i Model A, premer obdelovanca (maks.): 2.550 mm, teža obdelovanca (maks.): 7.000 kg, skupna višina: 4.200 mm, skupna dolžina: 5.540 mm, skupna širina: 5.930 mm, širina mize: 1.400 mm, dolžina mize: 1.600 mm, skupna masa: 29.000 kg, največja hitrost vretena: 3.000 obr/min, razdalja od središča mize do nosu vretena: 1.750 mm, moč vretenovega motorja: 26 W, nos vretena: BT50, število mest v zalogovniku orodij: 60, dolžina orodja: 600 mm, premer orodja: 250 mm, teža orodja: 30 g, Osa B: 1 stopinja Krmilnik: FANUC 32i-Model A Razdalja od nosu vretena do vrha mize: 0 - 1500 mm Razdalja od nosu vretena do središča mize: 550 - 1750 mm Dimenzije stroja: 5540 x 5930 x 4200 mm Teža stroja: 29000 kg Maksimalna hitrost podajalnega pomika: 6 m/minuto Maksimalni premer orodja: 250 mm Maksimalna dolžina orodja: 600 mm Maksimalna teža orodja: 30 kg Maksimalna teža obdelovanca: 7000 kg Hitri podaji: WXYZ: 6 x 12 x 12 x 12 m/minuto Premer vretena: 110 mm Moč vretenskega motorja: 26/22 kW Hitrost vretena: 3000 o/min Zasun: 2550 mm Velikost mize: 1400 x 1600 mm Hsdpoxm Sxvefx Adrefh Kapaciteta avtomatske menjave orodij: 60 postaj Tip orodja: BT50 Pomiki XYZ: 2000 x 1500 x 1200 mm Osa W: 500 mm Hladilno sredstvo, nizkonapetostna svetilka, transporter za ostružke, pravokotna rezkalna glava z dolgim dosegom, sonda za merjenje dolžine orodja, Renishaw delovna sonda, popolnoma zaprti varnostni pokrovi stroja.

Stanje: rabljeno, številka stroja/vozila: 2820-0419, x-axis travel: 500 mm y-axis travel: 400 mm z-axis travel: 400 (340) mm Table size: 710 x 430 mm Spindle speed range: 40 – 4,000 rpm Feed rate range: 2 – 3,600 mm/min Rapid traverse: 4.0 m/min Swivelling head +/-: 90° Quill stroke: 80 mm Spindle taper: SK 40 Control: Contour 3 Total power requirement: 5.5 kW Machine weight approx.: 1,900 kg Hjdpfx Adeh Ra Nijrsfh Space requirement approx.: 2 x 1.4 x 1.8 m CNC-controlled universal milling machine with Dialog 4 control, vertical head swivels +/- 90° with 80 mm quill stroke, feeds and rapid traverses on 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop, machine lighting, chip splash guard enclosure with chip tray, pendant control panel and electronic handwheel. The machine is in good condition.

Stanje: rabljeno, številka stroja/vozila: 1621, x-axis travel: 800 mm y-axis travel: 300 mm z-axis travel: 400 mm Table size: 1000 x 440 mm Tool holder spindle taper: SK40 Spindle speeds (belt pulley): 40 - 2000 rpm Number of main spindle speed steps: 18 Maximum spindle speed: (6000 possible by changing the belt) rpm Hfsdpfjh Ra Nqox Adreh Feed rate range: 10 - 500 mm/min Number of feed speed steps: 18 Total power requirement: 3 kW Machine weight approx.: 2.1 t Space requirement approx.: 1600x1550x1930 mm Universal tool milling machine in travelling column bed design for machining heavy workpieces, featuring a 3-axis rotating and swivelling work table, feeds and rapid traverse on all 3 axes, both vertical and horizontal quills with high-speed head, maximum speeds of 1900/2350/3000/3750/4750/6000 rpm adjustable via belt preselection, coolant pump, universal clamping table equipped with 6 T-slots, each 16 mm x 7. Separate control cabinet without main machine switch.

Stanje: rabljeno, Technical Details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table speed: 0.05–4.5 m/min, stepless Spindle speed: grinding spindle 1780, 2050 rpm Spindle speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2200x280 mm Table swivel range: 9° forwards / 10° backwards Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDER without internal grinding attachment Hfsdpsu Ng Dgjfx Adreh - For precision grinding of external (and internal) as well as tapered surfaces. - Infeed of grinding spindle headstock by hand or hydraulically - Table feed hydraulically infinitely variable - Grinding spindle swivels by 60° - Workpiece headstock swivels by 90°, with MK 4 mounting - Tailstock, MK 3 mounting Equipment: - Wheel dressing device - Coolant tank including pump and supply as per description.

Stanje: rabljeno, Leto izdelave: 1984, X-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Table size: 700 x 470 mm Spindle speeds: 40 - 4000 rpm Feed range: 2 - 3600 mm/min Rapid traverse speed: 4.0 m/min Quill stroke: 90 mm Spindle taper: SK 40 Hodpfocxxypex Adrofh Control: Deckel Dialog 3 Drive power - milling spindle: 3 kW Total power requirement: 22 kW Machine weight approx.: 1.8 t CNC-controlled universal milling machine with Deckel Dialog 3 control, vertical head swivelling with quill, horizontal spindle, automatic feeds, rapid traverses, electronic handwheel, additional portable control panel, hydraulic tool clamping, automatic central lubrication, machine lamp, coolant system, separate coolant tank, various tool holders, emergency stop. - Machine sold - - SOLD -

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2201-5046, Dobro stanje z različnimi držali orodij. Hsdpfx Ajy Al Tnodrsfh SK40 - S20 Heidenhain Aktivsteuerung upravljanje Avtomatski pomiki na vseh oseh. 4. os je krmiljena.

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm Hsdpfxsirax Uo Adrsfh -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: dober (rabljeno), Interna št. artikla: 25110 Univerzalni rezkalni stroj Deckel FP3 Št. stroja: 2482 + 3-osni digitalni prikaz + Zaščitni pokrov s stikalom (UVV) + Strojna svetilka + Razni SK40 držala orodij in set vpenjalnih tulec (S20x2) Rezkalna miza: 800 x 420 mm Vpenjalo vretena: SK40 Hfjdpfsyb Su Uex Adrsh Najv. hitrost: 2000 min⁻¹ Pogonska moč: 3 kW Pomiki X/Y/Z: 500/300/400 mm Mere (D׊×V): 1400 x 1500 x 1800 mm Teža: ca. 1500 kg Stroj je popolnoma delujoč in si ga je mogoče po dogovoru ogledati pod napetostjo v ogrevanem skladiščnem prostoru nad 500 m².

Stanje: pripravljen za uporabo (rabljen), DECKEL FP 2LB vključno s 3-osnim digitalnim prikazovalnikom iz univerze v ohranjenem originalnem stanju - 3-osni digitalni prikazovalnik "ACURITE" - Pomiki X/Y/Z 795x300x400mm - Samodejni pomiki (18x) / hitri pomiki na vseh treh oseh - Območje vrtljajev 40 - 2000 min⁻¹ (18 stopenj vrtljajev) - Vertikalna / horizontalna rezkalna enota - Vertikalna glava z vrtljivo glavo z izvlečno vreteno Hfsdpfxszbi I Ej Adreh - ISO 40 / vpenjalni sistem orodja - Površina mize (kotna miza) 1000x440mm - Površina spenjanja z dodatno mizo 1000x770mm - Naprava za dovod hladilne tekočine - Razna orodna vpenjala - Strojna svetilka - Dokumentacija Dimenzije: D׊×V 2,5×2,4×1,8 metra / Teža 2200 kg Pridržujemo si pravico do napak in tipkarskih napak.

Stanje: rabljeno, Leto izdelave: 2000, Rabljeni stroj Leto izdelave: 2000 Oprema in tehnični podatki: - z elektromotornim nastavljanjem višine in nagiba glavnega žaginega lista, vnos mer preko tipkovnice - digitalni prikaz kota nagiba in višine reza - izvedba po CE - dolžina reza 3000 mm - z vmesno in končno zaklepanjem - širina reza 1300 mm - fino nastavljanje vzporednega prislona - največji premer žaginega lista 450 mm Hedpfxjy Siz Io Adrjfh - motor 5,5 kW s 4 hitrostmi 3000/4000/5000/6000 vrt/min, ročno nastavljiv - z avtomatsko zavoro in digitalnim prikazom števila obratov - dvoosni predrezovalnik z elektromotornim nastavljanjem višine in strani - RAPIDO predrezovalni sistem - DUPLEX dvostranski kotni prislon Razpoložljivost: hitro Lokacija skladišča: 63934 Röllbach

Leto izdelave: 1990, stanje: dober (rabljeno), Various collets and holders, approx. 300 pieces. For DECKEL milling machines FP1, FP2, FP3, FP4. Individual sale upon request. Hfsdehvz Iijpfx Adrjh

Stanje: dober (rabljeno), Leto izdelave: 1981, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper and S20x2 spindle mount. In good, operational condition. Can be demonstrated under power by prior arrangement. Hfodpfxowg S Nke Adrsh

Stanje: rabljeno, Leto izdelave: 1989, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 24 / 48 Throat depth: 500 mm Clearance between frame walls: 1000 mm Installation height: 615 mm Table area: 1400 x 880 mm Pass-through opening in table: 450/500 mm Hfodovut Ncepfx Adreh Table height above floor: 800 mm Ram area: 1380 x 620 mm Ram adjustment: 125 mm Drive power: 29.0 kW Weight: 27.0 t Required floor space approx. 2.0 x 2.6 x 4.1 m (L x W x H) Approved for manual loading operations according to German Accident Prevention Regulations (UVV). Equipped with pole-changeable motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram counterbalance, motorized ram adjustment, semi-automatic stroke adjustment, motorized central lubrication, two-hand operation control. The machine can be inspected under power at our warehouse.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3A DIALOG 11 with 3D Path Control and Accessories Technical Data: - Machine No.: 2820-1119, Year of manufacture approx. 1990 - Fixed angle table - Spindle speed: 31.5 - 6300 rpm - Feed drive: 2 to 3600 mm/min - Rapid traverse: 6000 mm/min - Drive power: 7.0 kW - Digital scales: 0.001 mm resolution - Travel range X/Y/Z: 400/400/400 mm Hfodoy S U E Espfx Adrjh - Vertical and horizontal quill hydraulically actuated – SK40 taper - Quill stroke vertical: 80 mm - Weight approx. 2000 kg Equipment and Accessories: - DIALOG 11 CNC control - Machine lamp - Coolant system - Central lubrication - User manual, spare parts list, electrical diagrams - Tool cabinet with accessories: vise, milling cutters, tool holders, clamping tools, collets, ground parallels, three-jaw chuck, and much more About the Machine: Offered is a Deckel FP3A universal milling machine in very good condition with 3D path control (Dialog 11). The guideways are in excellent condition. The machine is equipped with a tool cabinet and a comprehensive set of tooling and accessories. The FP3A comes from a large industrial facility and was only used occasionally. Mechanically and electrically tested. Take advantage of the opportunity to view and test the machine under power at our premises.